Abstract:Autonomous unmanned aerial vehicles (UAVs) that can execute aggressive (i.e., high-speed and high-acceleration) maneuvers have attracted significant attention in the past few years. This article focuses on accurate tracking of aggressive quadcopter trajectories. We propose a novel control law for tracking of position and yaw angle and their derivatives of up to fourth order, specifically velocity, acceleration, jerk, and snap along with yaw rate and yaw acceleration. Jerk and snap are tracked using feedforward inputs for angular rate and angular acceleration based on the differential flatness of the quadcopter dynamics. Snap tracking requires direct control of body torque, which we achieve using closed-loop motor speed control based on measurements from optical encoders attached to the motors. The controller utilizes incremental nonlinear dynamic inversion (INDI) for robust tracking of linear and angular accelerations despite external disturbances, such as aerodynamic drag forces. Hence, prior modeling of aerodynamic effects is not required. We rigorously analyze the proposed control law through response analysis and demonstrate it in experiments. The controller enables a quadcopter UAV to track complex 3-D trajectories, reaching speeds up to 12.9 m/s and accelerations up to 2.1 g, while keeping the root-mean-square tracking error down to 6.6 cm, in a flight volume that is roughly 18 m $\times 7$ m and 3-m tall. We also demonstrate the robustness of the controller by attaching a drag plate to the UAV in flight tests and by pulling on the UAV with a rope during hover.

A Revisited Approach To Lateral Acceleration Modeling For Quadrotor Uavs State Estimation

State Estimation of QAUV Based on Dynamic Model

VID-Fusion: Robust Visual-Inertial-Dynamics Odometry for Accurate External Force Estimation

Sensing and Control of a Quadrotor Using a Visual Inertial Fusion Method

Inertial-aided State and Slope Estimation Using a Monocular Camera

Aerodynamic Modeling and Verification of Quadrotor UAV Using Wind-Tunnel Test

A Study on Coaxial Quadrotor Model Parameter Estimation: an Application of the Improved Square Root Unscented Kalman Filter

Metric Sensing and Control of a Quadrotor Using a Homography-Based Visual Inertial Fusion Method.

DIDO: Deep Inertial Quadrotor Dynamical Odometry

Data-Driven MPC for Quadrotors

Quad‐Rotor Modeling and Attitude Control Using State‐Dependent ARX Type Model

Estimation for Quadrotors

Estimating wind using a quadrotor

Accurate Tracking of Aggressive Quadrotor Trajectories Using Incremental Nonlinear Dynamic Inversion and Differential Flatness

Robust Geometric Control for a Quadrotor UAV with Extended Kalman Filter Estimation

Modeling and Implementation of Quadcopter Autonomous Flight Based on Alternative Methods to Determine Propeller Parameters

Flying a Quadrotor with Unknown Actuators and Sensor Configuration

Accurate High-Maneuvering Trajectory Tracking for Quadrotors: A Drag Utilization Method

Quad-rotor Flight Simulation in Realistic Atmospheric Conditions

NeuroBEM: Hybrid Aerodynamic Quadrotor Model

Dynamics Modeling and Trajectory Tracking Control of a Quadrotor Unmanned Aerial Vehicle