Abstract:The most common filters used to determine the angular position of quadrotors are the Kalman filter and the complementary filter. The problem of angular position estimation consist is a result of the absence of direct data. The most common sensors on board UAVs are micro electro mechanical system (MEMS) type sensors. The data acquired from the sensors are processed using digital filters. In the literature, the results of research conducted on the effectiveness of Kalman and complementary filters are known. A significant problem in evaluating the performance of the studied filters was the lack of an arbitrarily determined UAV position. The authors of this paper undertook the task of determining the best filter for a real object. The main objective of this research was to improve the stability of the physical quadrotor. For this purpose, we developed a research method using a laboratory station for testing quadrotor drones. Moreover, using the MATLAB environment, they determined the optimal parameters for the real filter applied using the PX4 software, which is new and has not been considered before in the available scientific literature. It should be mentioned that the authors of this work focused on the analysis of filters most commonly used for flight stabilization, without modifying the structure of these filters. By not modifying the filter structure, it is possible to optimize the existing flight controllers. The main contribution of this study lies in finding the most optimal filter, among those available in flight controllers, for angular position estimation. The special emphasis of our work was to develop a procedure for selecting the filter coefficients for a real object. The algorithm was designed so that other researchers could use it, provided they collected arbitrary data for their objects. Selected results of the research are presented in graphical form. The proposed procedure for improving the embedded filter can be used by other researchers on their subjects.

A Study on Coaxial Quadrotor Model Parameter Estimation: an Application of the Improved Square Root Unscented Kalman Filter

Filter-based Adaptive Backstepping Attitude Control for Multi-Rotor UAVs with Parametric Uncertainty, External Disturbance and Input Saturation

Integral Backstepping-based Nonlinear Flight Control Strategy for Quadrotor Aerial Robot with Unknown Mass

EKF-Based Parameter Identification of Multi-Rotor Unmanned Aerial VehiclesModels

Research on Attitude Detection and Flight Experiment of Coaxial Twin-Rotor UAV

Full control of a quadrotor using parameter-scheduled backstepping method: implementation and experimental tests

Robust Geometric Control for a Quadrotor UAV with Extended Kalman Filter Estimation

Application of Filters to Improve Flight Stability of Rotary Unmanned Aerial Objects

Quadrotor Aircraft Attitude Estimation and Control Based on Kalman Filter

Estimation for Quadrotors

Active model-based nonlinear system identification of quad tilt-rotor UAV with flight experiments

Flying a Quadrotor with Unknown Actuators and Sensor Configuration

Quadrotor Aircraft Design Based on the K60 Controller

Finite-time Adaptive Integral Backstepping Fast Terminal Sliding Mode Control Application on Quadrotor UAV

Kalman-filter-based Accurate Trajectory Tracking and Fault-Tolerant Control of Quadrotor

Attitude Calculation of Quadrotor UAV Based on Extended Kalman Filter and Complementary Filter

Self-immunity study of quadrotor UAV based on Modelica system modeling and disturbance feed-forward compensation

Modeling and control approach to a distinctive quadrotor helicopter

Estimating wind using a quadrotor

Justification of optimal parameters for quadcopter PID-controllers with frame sizes up to 150 mm

Adaptive Fuzzy Attitude Sliding Mode Control for a Quadrotor Unmanned Aerial Vehicle