Abstract:Recently, increasing efforts have been focused on the development and adoption of autonomous underwater vehicles (AUVs) for various applications. However, the GPS signals are usually unavailable, the vehicle dynamics is very uncertain, and the complicated vision based localization algorithms may not work well in the underwater environments. Hence, accurate and timely state estimation using low-cost sensors remains a challenge for the control and navigation of AUVs. This paper considers the state estimation problem for underwater vehicle navigation around a cylindrical structure. The vehicle is assumed to be equipped with only low-cost sensors: an inertia measurement unit (IMU), a pressure sensor and a monocular camera. By exploiting the prior knowledge on the size and shape of the structure, an efficient algorithm for estimating the state of the AUV is developed without using any dynamic model. Firstly, a state observer is proposed under the condition that the localization result (rotational and translational position) is available. Next, we present a method for localization based on the IMU readings, pressure sensor readings and the image of the cylindrical structure, which uses the geometry of the structure and only requires simple image processing (line extraction). Then we prove that the proposed observer is globally stable. Preliminary experimental results and simulation results are reasonable and promising, which implies the proposed method has potential to be used in the real AUV navigation applications.

State Estimation of QAUV Based on Dynamic Model

A Method of State Estimation for Underwater Vehicle Navigation Around a Cylindrical Structure

QUUV: A Quadrotor-Like Unmanned Underwater Vehicle with Thrusts Configured As X Shape

Controllability Analysis of a Quadrotor-like Autonomous Underwater Vehicle

A Quadrotor-Like Unmanned Underwater Vehicle

Dynamic Modeling of a Lightweight Unmanned Underwater Vehicle: Sea-U-Dragon

A Low Cost Visual Positioning System for Small Scale Tracking Experiments on Underwater Vehicles

Sensing and Control of a Quadrotor Using a Visual Inertial Fusion Method

Path following of QAUV using attitude-velocity coupling model

Dynamic Modeling of Quadrotor AUV Using a Novel CFD Simulation

Inertial-aided State and Slope Estimation Using a Monocular Camera

State Estimation of Marine Vessels Affected by Waves by Unmanned Aerial Vehicles

Metric Sensing and Control of a Quadrotor Using a Homography-Based Visual Inertial Fusion Method.

Cooperative Estimation of a Three-Dimensional Flow Field Using Multiple AUVs and Local Measurements

Real-Time Optimal States Estimation with Inertial and Delayed Visual Measurements for Unmanned Aerial Vehicles

GPS/IMU/Hydrodynamic Model Fusion State Estimation for Unmanned Surface Vehicles Based on Moving Horizon Estimation Method

From Aerial to underwater: Modeling and trajectory tracking control of the underactuated quadrotor hybrid Aerial underwater vehicle

Underwater motions analysis and control of a coupling-tiltable unmanned aerial-aquatic quadrotor

Robust state estimation and fault detection for Autonomous Underwater Vehicles considering hydrodynamic effects

DIDO: Deep Inertial Quadrotor Dynamical Odometry