Abstract:Biopotential signals, like electrocardiography (ECG), electromyography (EMG), and electroencephalography (EEG), can help diagnose cardiological, musculoskeletal and neurological disorders. Dry silver/silver chloride (Ag/AgCl) electrodes are commonly used to obtain these signals. While a conductive hydrogel can be added to Ag/AgCl electrodes to improve the contact and adhesion between the electrode and the skin, dry electrodes are prone to movement. Considering that the conductive hydrogel dries over time, the use of these electrodes often creates an imbalanced skin-electrode impedance and a number of sensing issues in the front-end analogue circuit. This issue can be extended to several other electrode types that are commonly in use, in particular, for applications with a need for long-term wearable monitoring such as ambulatory epilepsy monitoring. Liquid metal alloys, such as eutectic gallium indium (EGaIn), can address key critical requirements around consistency and reliability but present challenges on low viscosity and the risk of leakage. To solve these problems, here, we demonstrate the use of a non-eutectic Ga–In alloy as a shear-thinning non-Newtonian fluid to offer superior performance to commercial hydrogel electrodes, dry electrodes, and conventional liquid metals for electrography measurements. This material has high viscosity when still and can flow like a liquid metal when sheared, preventing leakage while allowing effective fabrication of electrodes. Moreover, the Ga–In alloy not only has good biocompatibility but also offers an outstanding skin-electrode interface, allowing for the long-term acquisition of high-quality biosignals. The presented Ga–In alloy is a superior alternative to conventional electrode materials for real-world electrography or bioimpedance measurement.

Impedance and Electromyographic Properties of Metal Dry Bioelectrode with Non-Uniform Surface Microstructure

Characterization of Dry Biopotential Electrodes

Development of Soft Dry Electrodes: from Materials to Structure Design

Insight into the Contact Impedance between the Electrode and the Skin Surface for Electrophysical Recordings

Microneedle Array Electrode with Ag-PPS Modification for Superior Bio-Signal Recording on Skin

Heterogeneous electrochemical characteristics of biofilm/metal interface and local electrochemical techniques used for this purpose

Development of Three-Dimension Microelectrode Array for Bioelectric Measurement Using the Liquidmetal-Micromolding Technique

Dry Electrodes for Human Bioelectrical Signal Monitoring

Fructus Xanthii-Inspired Low Dynamic Noise Dry Bioelectrodes for Surface Monitoring of ECG

Wafer-patterned, permeable, and stretchable liquid metal microelectrodes for implantable bioelectronics with chronic biocompatibility

Development and Evaluation of 3D‐Printed Dry Microneedle Electrodes for Surface Electromyography

Simulation and verification electrical properties of liquid metal flexible bioelectrodes

Analyzing Dry Electrodes for Wearable Bioelectrical Impedance Analyzers

Dry electrodes for bioimpedance measurements -- design, characterization and comparison

Low Melting Point Metal-Based Flexible 3D Biomedical Microelectrode Array by Phase Transition Method.

3D Printing of PEDOT:PSS-PU-PAA Hydrogels with Excellent Mechanical and Electrical Performance for EMG Electrodes

A Non-Newtonian liquid metal enabled enhanced electrography

An FPC Based Flexible Dry Electrode with Stacked Double-Micro-domes Array for Wearable Biopotential Recording System

A Compliant Ionic Adhesive Electrode with Ultralow Bioelectronic Impedance

A Highly Sensitive Surface Electrode for Electrophysiological Monitoring

Kirigami‐Structured, Low‐Impedance, and Skin‐Conformal Electronics for Long‐Term Biopotential Monitoring and Human–Machine Interfaces