Abstract:Polylactic acid (PLA) has received significant attention in recent years as a commercially available biodegradable resin. However, its brittleness limits its broader adoption. Blending PLA with another biodegradable resin poly(butylene adipate-co-terephthalate) (PBAT) is a simple strategy to toughen PLA, however, the effect is limited and the tensile strength is generally harmed. In this work, PBAT, initiator BIBP and cross-linker TAIC were initially mixed and then extruded into pre-crosslinked PBAT pellets. Subsequently, the pre-crosslinked PBAT and PLA were melt-blended to create PLA/micro-crosslinked PBAT composites. The effects of different TAIC contents on the degree of PBAT gelation, properties and morphological structure of composites were explored. The results showed that TAIC could effectively improve the mechanical properties of PLA/PBAT, particularly the notched impact strength. When the TAIC content was 0.3 wt% of PBAT, the notched impact strength and elongation at break of PLA/PBAT (7/3) reached 42.26 kJ/m 2 and 264.26 %, respectively, which are both far higher than those of the blend without cross-linking (9.37 kJ/m 2 and 21.29 %). The composites still exhibited excellent tensile strength (46.23 MPa) and tensile modulus (1676.84 MPa), surpassing those of PLA/un-crosslinked PBAT composites. This enhanced toughening and tensile strength maintaining effect is attributed to the network structure in PBAT and the increased compatibility between PLA and PBAT caused by cross-linking within PBAT and at PLA/PBAT interface. The dynamic vulcanization strategy using an extruder provides a possibility for the large-scale preparation of stiff-tough PLA. Of course, further work, including pilot or industrial trials, is necessary to validate scalability.

The Investigation of the Toughening Mechanism of PHBV/PBAT with a Novel Hyperbranched Ethylenediamine Triazine Polymer Based Modifier: the Formation of the Transition Layer and the Microcrosslinking Structure

Modification of Unsaturated Polyester Resin by HTPB: Effect of Introducing Method of the Rubber

Toughening of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) by phenyl terminated hyperbranched polyesters with higher thermal stability

Structure-property Relationships of Reactively Compatibilized PHB/EVA/starch Blends.

Investigation on Compatibility of PLA/PBAT Blends Modified by Epoxy-Terminated Branched Polymers Through Chemical Micro-Crosslinking

Mechanical Properties of Poly(3-hydrobutyrate-co-hydroxyvalerate)/ Biodegradable Hyperbranched Poly(ester Amide) Blends

Impacts of chain extenders on thermal property, degradation, and rheological performance of poly(butylene adipate-co-terephthalate)

Tailoring compatibility and toughness of microbial poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/bio-based polyester elastomer blends by epoxy-terminated hyperbranched polyester

Toughening of PBT by POE/POE-g-GMA Elastomer Through Regulating Interfacial Adhesion and Toughening Mechanism

Performance evaluation of biodegradable polymer PHBV and PBAT blends with adjustable melt flow behaviour, heat deflection temperature, and morphological transition

Effect of chain extender on the morphological, rheological and mechanical properties of biodegradable blends from PBAT and P34HB

Designing of reactive micro-crosslinked PBAT as the efficient biodegradable toughener for PLLA

Functionalization of poly(butylene adipate‐co‐terephthalate) and its compatibilizing effect on PBAT/thermoplastic starch blends

Reinforcing and Toughening Modification of PPC/PBS Blends Compatibilized with Epoxy Terminated Hyperbranched Polymers

Preparation of biodegradable PLA/PBAT blends with balanced toughness and strength by dynamic vulcanization process

Stable nanoscale sea-island structure of biobased polyamide 56/poly (butylene adipate- co -terephthalate) blends compatibilized by interfacial hyperbranched structure: Toward biobased polymer blends with ultrahigh toughness

The effect of amino-terminated hyperbranched polymers on the impact resistance of epoxy resins

Tuning the Structure–Property Relationships in Binary and Ternary Blends of PLA/PBAT/PHBH

Cyanate Ester Resin Modified by Hydroxyl‐terminated Polybutadiene: Morphology, Thermal, and Mechanical Properties

Toughening of Polylactide with Epoxy-Functionalized Methyl Methacrylate-Butadiene Copolymer

Design of biodegradable PLA/PBAT blends with balanced toughness and strength via interfacial compatibilization and dynamic vulcanization