Abstract:Soil–rock mixtures (S–RM) which formed in the quaternary period are a type of extremely inhomogeneous and loose geomaterial with a certain percentage of rock blocks. They are composed of rock blocks with various sizes and high strength, fine grained soil and pores. The meso-failure mechanism and macro-physical and mechanical characteristics of S–RM are largely controlled by its rock block proportion and the granular distribution. As we know, when the rock blocks in the S–RM are larger, it is difficult to take an in-situ sample for an on-site test. In addition, it is difficult to obtain the granular distribution of rock blocks in S–RM by traditional sieving tests. This paper uses a new method called digital image processing (DIP) in which the rock blocks in S–RM samples are separated from the soil matrix, and the proportion and distribution of the rock blocks is obtained quantitatively. The results are used for the sample preparation of the large scale direct shear tests which provide a new method for the test study of S–RM. According to the results of large scale direct shear tests the rock block size proportion controls the deformation and fracture mechanism of the S–RM. The shape of the shear stress vs horizontal displacement curve and the vertical displacement vs horizontal displacement curve of the S–RM samples are different from that of general “soil” and “rock”. With the increment of the rock block proportion the shear band of the S–RM increases. When the rock block proportion lies in the range of 25–70%, the increment of the internal friction angle linearly increases with the increment of the rock block proportion. The cohesion of the S–RM decreases compared with that of the soil. When the rock block proportion is larger than 30%, however, there is only a little decrease in the cohesion with the increment of the rock block proportion.

Behavior of Shear Strength of Coarse Grained Materials Based on Large Scale Direct Shear Test (I)

Shear Strength Properties of Coarse-Grained Soils Determined Using Large-Size Direct Shear Test

Study Of Shear Strength Characteristics Of Simulation Rock Structural Planes Based On Multi-Size Direct Shear Tests

Effects of Particle Size on the Shear Behavior of Coarse Grained Soils Reinforced with Geogrid

Study on large scale direct shear test on soil-rock mixture with multiple grain grades in high fill slope engineering

Evaluation of coarse-grained mechanical properties using small direct shear test

Influence of soil particle size on monotonic and cyclic direct shear behaviors of geogrid-soil interface

The Scale Effect of Coarse-Grained Materials by Triaxial Test Simulation

Investigation on Shearing Strength and Particle Breakage of Coarse Materials Based on Large-Scale Triaxial Tests

Effect of particle gradation on static and dynamic direct shear properties of geogrid-sand interface

VARIATION OF THE SHEAR STRENGTH OF XIAMEN UNSATURATED RESIDUAL SOILS WITH WATER CONTENT

Cyclic and post-cyclic direct shear behaviors of geogrid-sand interface with different soil densities

Study on the shear strength of soil–rock mixture by large scale direct shear test

Particle size effects on coarse soil-geogrid interface response in cyclic and post-cyclic direct shear tests

Large-scale direct shear test investigation of the 3D behavior of a gravel-structure interfaces

Effects of Particle Size and Soil Bed on the Shear Strength of Materials in the Direct Shear Test

Study of shear properties and shear model of soil-rock mixture

Experimental Study on the Effect of Coarse Grain Content on the Dilatancy and Particle Breakage Characteristics of Coarse-Grained Soils

Direct Shear Test on Coarse Gap-Graded Fill: Plate Opening Size and Its Effect on Measured Shear Strength

Mechanical testing of coarse soils with large direct shear box

Influence of Water Content and Shear Rate on the Mechanical Behavior of Soil-Rock Mixtures