Abstract:Since municipal solid waste incineration bottom ash (MSWIBA) contains some heavy metals that are harmful to the groundwater and soil, this study proposes an effective and new approach to deal with high-volume MSWIBA. Selecting 70% MSWIBA, 10% ordinary Portland cement (OPC), 10% fly ash/ground granulated blast furnace slag (FA/GGBFS), and 1% volume of polypropylene (PP) fiber as the raw materials, this project designed and manufactured cold-bonded fiber aggregates (CBFAs) and applied them into sustainable concrete. It was found that the water absorption of CBFAs was between 12 and 14%, the bulk density was between 900 and 1100 kg/m3, and the compressive strength of single particle was greater than 1.8 MPa. And it was found that the mechanical strength and bulk density of CBFAs were positively correlated, while the mechanical strength and water absorption were negatively correlated. The leaching behaviors of CBFAs on Cu, Pb, Cd, and Cr were successfully suppressed to less than 1% of that originally from MSWIBA, which can be in line with the Chinese standards. Additionally, it is also found that the green concrete with adding GGBFS-CBFAs has higher overall fluidity and better mechanical properties than the concrete with FA-CBFAs. The mechanical properties of concrete were the best under the replacement rate of 60% of CFBAs, and the strength of green concrete added with GGBFS-CBFAs reached 96% of that of ordinary concrete. In this study, the rapid chloride ion penetration test, mercury intrusion and electron microscope tests found that the bonding effect between the CBFAs and the green concrete matrix was better, and the pore structure in the transition zone of the surrounding interface was refined. The proportion of transition pores in the pore structure was up to 59%. This shows that the concrete added with CBFAs has better resistance to chloride ion diffusion, and has some improvement on the durability. This research suggests that CBFAs including high volume MSWIBA has the potential to be successfully applied as the alternative to natural aggregates in sustainable concrete, and this can also advance waste recycling, and solidify high volume heavy metals in infrastructures.

Heavy Metals Leaching Toxicity and Concrete Performance of Water-Quenched Blast Furnace Slag after Adsorption

Heavy Metal Leaching Behaviour and Long-Term Environmental Risk Assessment of Cement-Solidified Municipal Solid Waste Incineration Fly Ash in Sanitary Landfill

Preparation of lightweight aggregates using waste soil contaminated with heavy metals: Physical properties, microstructure and verification of heavy metal solidification through different leaching tests

Study on heavy metal leaching behavior of waste concrete

The Utilization of Alkali-Activated Lead–Zinc Smelting Slag for Chromite Ore Processing Residue Solidification/Stabilization

The Solidification of Lead-Zinc Smelting Slag through Bentonite Supported Alkali-Activated Slag Cementitious Material

Leachability of Heavy Metals in MSW Incineration Slag under Simulated Acid Rain Condition

Assessing heavy-metal leaching risk in cement-industrial slag composite pastes using a mechanism-based thermodynamic approach

Study on heavy metals leaching toxicity and the road application of municipal sewage sludge solidification body

Sustainable and efficient stabilization/solidification of Pb, Cr, and Cd in lead-zinc tailings by using highly reactive pozzolanic solid waste

Novel recycling application of high volume municipal solid waste incineration bottom ash (MSWIBA) into sustainable concrete

Immobilization enhancement of heavy metals in lightweight aggregate by component regulation of multi-source solid waste

Synchronous stabilization of Pb, Zn, Cd, and As in lead smelting slag by industrial solid waste

Solidification and stabilization of Pb-Zn mine tailing with municipal solid waste incineration fly ash and ground granulated blast-furnace slag for unfired brick fabrication

Assessment of the long-term leaching characteristics of cement-slag stabilized/solidified contaminated sediment

Leaching Characteristics of Heavy Metal and Its Impact on Environment of Carbide Slag Used for Desulfurization

Study on the leaching toxicity and performance of manganese slag-based cementitious materials

Effect of long-term dry–wet circulations on the Solidification/stabilization of Municipal solid waste incineration fly ash using a novel cementitious material

Preparation of Cementitious Materials from Mechanochemically Modified Copper Smelting Slag Compounded with High-Aluminum Fly Ash

Synthesis and influencing factors of high-performance concrete based on copper tailings for efficient solidification of heavy metals

Migration characteristics and toxicity evaluation of heavy metals during the preparation of lightweight aggregate from sewage sludge