Abstract:Graphene is a promising material for many potential applications, owing to its extraordinary properties. Numerous synthesizing approaches have been developed to realize the promising applications of graphene. However, there is lack of a comprehensive way, which combines the following features, i.e. large-area growth, patterned graphene and fast growth at the same time. Here, we provide an engineering approach to both large-area and patterned graphene at a high rate. The high power and continuous-wave lasers were employed to irradiate solid carbon source coated on nickel surface. The rate of graphene production by laser irradiation exceeds 28.8 cm2/min and the solid carbon source is less hazardous compared to typical gaseous carbon sources used in chemical vapor deposition (CVD). The influence of laser process on graphene fabrication was investigated systematically. Raman analyses, optical images and scanning electron microscopy (SEM) results show that the quality of graphene strongly depends on the laser process parameters, including laser power density and scanning rate. Adjusting the parameters to input the appropriate heat, so that the high quality graphene can be obtained in an optimal condition. The influence of carbon source on graphene growth was also investigated. Ultimately, the penetration and precipitation mechanism of carbon into Ni substrate during the fabrication process were also discussed. This approach may reach the scale large enough for practical applications.Graphene is a promising material for many potential applications, owing to its extraordinary properties. Numerous synthesizing approaches have been developed to realize the promising applications of graphene. However, there is lack of a comprehensive way, which combines the following features, i.e. large-area growth, patterned graphene and fast growth at the same time. Here, we provide an engineering approach to both large-area and patterned graphene at a high rate. The high power and continuous-wave lasers were employed to irradiate solid carbon source coated on nickel surface. The rate of graphene production by laser irradiation exceeds 28.8 cm2/min and the solid carbon source is less hazardous compared to typical gaseous carbon sources used in chemical vapor deposition (CVD). The influence of laser process on graphene fabrication was investigated systematically. Raman analyses, optical images and scanning electron microscopy (SEM) results show that the quality of graphene strongly depends on the laser ...

Local Controllable Laser Patterning of Polymers Induced by Graphene Material.

Graphene-Doped Polymer Optical Nanofibers

Enhanced Local Controllable Laser Patterning of Polymers Induced by Graphene/polystyrene Composites

Laser-induced porous graphene films from commercial polymers

A Simple Way to Achieve Legible and Local Controllable Patterning for Polymers Based on a Near-Infrared Pulsed Laser

An All-Optical Modulation Method in Sub-Micron Scale.

Laser Direct Writing of Graphene Nanostructures Beyond the Diffraction Limit by Graphene Oxidation

Laser Writing Block Copolymer Self-Assembly on Graphene Light-Absorbing Layer

Effective characterization of polymer residues on two-dimensional materials by Raman spectroscopy

Graphene-doped polymer nanofibers for low-threshold nonlinear optical waveguiding

Laser Direct Writing of Graphene Patterns

Laser-Induced Freestanding Graphene Papers: A New Route of Scalable Fabrication with Tunable Morphologies and Properties for Multifunctional Devices and Structures.

Effective Control of Laser-Induced Carbonization Using Low-Density Polyethylene/Polystyrene Multilayered Structure via Nanolayer Coextrusion

Laser-Induced Graphene: Synthesis Advances, Structural Tailoring, Enhanced Properties, and Sensing Applications

Miraculous Light Enabling Processing of Magic Materials

Direct Laser Fabrication of Large-Area Graphene: an Engineering Approach to Nano-Materials

UV Laser‐Induced Polyimide‐to‐Graphene Conversion: Modeling, Fabrication, and Application

Laser-induced direct graphene patterning and simultaneous transferring method for graphene sensor platform.

Covalent 2D Patterning, Local Electronic Structure and Polarization Switching of Graphene at the Nanometer Level

Laser‐Induced Graphene: From Discovery to Translation

Research Progress of Laser-Induced Graphene Technology