Abstract:This work provides a comprehensive investigation of multi-walled carbon nanotubes (MWCNTs) inducement in weldment and their apparent effect on the microstructure, %elongation and ultimate fracture behavior of Al-Mg-Si alloy referring modified tungsten inert gas (TIG) welding joints. Serious experimental work is carried out at 1 wt%, 1.5 wt%, and 2 wt% of MWCNTs to provide a gradually increasing heterogeneous nucleation. The behavior of grain morphology showed the pure field of epitaxial growth without MWCNTs, and the forestry type morphology for 1 wt% MWCNTs at low welding currents (160 A), though there was a noticeable conversion into equiaxed (EQZ) grains filled with inter-dendritic particles at high welding currents (180 A and 200 A) for 1.5 wt% and 2 wt% of MWCNTs. Moreover, the formation of a cellular type network above the fusion line predominated initially at all parameters. Conversely, fine EQZ grains were formed as they moved upward into the welded zone (WZ) explicitly at a high heat input. A conceptual pictorial model is presented in the study which summarized the behavior of morphological changes at the utilized parameters. The welded joints have demonstrated an increasing trend of strength and %elongation in contrast to joints without added MWCNTs. Comparative results have shown an exceptional increment of 71 to 76% and 67 to 75% of elongation up to ultimate tensile strength (UTS), and a fracture point that was clinched for 1 wt% and 1.5 wt% MWCNTs at 180A. From macro to micro-examination of the fracture surfaces, pure ductile modes constituting elliptical cup and cone type isotropic flow was evident in all specimens. Detailed confirmation of the pull-out fracture mode of MWCNTs has highlighted in the scanning electron microscope (SEM) images that intimated a methodical contribution in load-transfer from matrix to the fiber under axial load. Overall, a concise en-route for MWCNTs inducement is well-appointed through tube fillers along with an activating facilitator (TiO2) in contrast to stereotype fillers for improved behavior termed as modified TIG welding joint process in study.

Structural Changes and Electrical Properties of Nanowelded Multiwalled Carbon Nanotube Junctions

Effects Of Corona Discharge On The Surface Structure, Morphology And Properties Of Multi-Walled Carbon Nanotubes

Carbon Welding by Ultrafast Joule Heating.

Microstructural Welding Engineering of Carbon Nanotube/Polydimethylsiloxane Nanocomposites with Improved Interfacial Thermal Transport

Laser assisted welding of layered metallic nanostructure

Laser-induced Single Point Nanowelding of Silver Nanowires

Significant reinforcement of mechanical properties in laser welding aluminum alloy with carbon nanotubes added

Fabrication and Electrical and Mechanical Properties of Carbon Nanotube Interconnections

Laser Assisted Welding of Gold Nanowires

Effect of Nanosecond Pulse Laser Irradiation on Morphology of Multi-Walled Carbon Nanotube Films

Effects of Nanosecond Laser Scanning Paths on Weld Formation, Microstructure and Mechanical Properties of Dissimilar Ultra-Thin Al/Cu Foil Nanosecond Laser Welded Joints

Tailoring The Intrinsic Metallic States Of Double-Walled Nanotube Films By Self-Soldered Laser Welding

Modified TIG Welding Joint Process: An Approach to Improve Microstructure and Fracto-Mechanical Behavior by MWCNTs Inducement in Al-Mg-Si Alloy

Connection of Macro-Sized Double-Walled Carbon Nanotube Strands by Current-Assisted Laser Irradiation

Microstructure-Property Correlations in Fiber Laser Welded Nb-Ti Microalloyed C-Mn Steel

Amorphous Molecular Junctions Produced by Ion Irradiation on Carbon Nanotubes

Microstructure evolution and mechanical properties of CNT/Al composite joints via friction stir welding

Structural Changes in Double-Walled Carbon Nanotube Strands Induced by Ultraviolet Laser Irradiation

Revealing the mechanism of laser welded aluminum alloy joints in-situ reinforced by carbon nanotubes based on microstructural evolution

Structural transformation of Cu-coated multi-walled carbon nanotubes subjected to high-energy laser irradiation

Decrease of contact resistance at the interface of carbon nanotube/electrode by nanowelding