Abstract:Brittle intermetallic compounds, formed during the welding process of titanium/aluminum (Ti/Al), lead to a significant reduction in joint mechanical properties. The purpose of this study is to mitigate the formation of brittle phases during the laser welding of dissimilar Ti/Al metals, thereby enhancing the mechanical properties of the joints. In this investigation, an innovative approach is adopted, utilizing Nb foil as an interlayer to effectively minimize the formation of brittle intermetallic phases during dissimilar welding. A comprehensive analysis of the microstructure of the transition layer was conducted using material characterization methods, including scanning electron microscope equipped with an energy dispersive X-ray spectrometer. The mechanical performance of the welded joints was assessed using tensile testing. The results indicate that the effective welding width and joint penetration depth at the joint interface were reduced in Ti/Al dissimilar metals when Nb was added as an intermediate layer, under the same welding process parameters, when compared to unalloyed weld seams. Furthermore, the utilization of a 0.05 mm Nb foil as the intermediate layer results in a significant 25% increase in the average shear strength compared to the other condition, with the average shear strength of the joint reaching its peak value at 192 N/mm. The unalloyed Ti/Al weld joint usually fractured along the melting zone, displaying complete brittle fracture characteristics. After Nb microalloying, the joint typically fractures along the transition zone and interface, exhibiting both cleavage and ductile fracture characteristics, indicating the combination of a brittle and toughness fracture. This study provides experimental evidence and new insights for welding Ti/Al composite structures, with significant theoretical and practical applications.

Effects of Nanosecond Laser Scanning Paths on Weld Formation, Microstructure and Mechanical Properties of Dissimilar Ultra-Thin Al/Cu Foil Nanosecond Laser Welded Joints

Effect of the scanning path on the nanosecond pulse laser welded Al/Cu lapped joint

Effect of spiral scan distance on the nanosecond-pulsed-laser lap joint of Al/Cu

Microstructure and mechanical property of Ti/Cu ultra-thin foil lapped joints with different weld depths by nanosecond laser welding

Effect of process parameters on microstructure and properties of laser welded joints of aluminum/steel with Ni/Cu interlayer

Study on Laser Overlap Welding of Titanium/Aluminum Dissimilar Metals Based on Niobium Microalloying

Effect of Copper-To-Aluminum Laser Welding Parameters on the Weld Formation and Microstructure Characteristics

Tensile resistance, microstructures of intermetallic compounds, and fracture modes of welded steel/aluminum joints produced using laser lap welding

Influence of scan line spacing on nanosecond pulse laser welding of 6063 Al to steel thin sheets

Influence of Cu Coating on the Microstructure and Mechanical Properties of Laser Welded Joints in Dissimilar Metals

Interfacial microstructure and reaction mechanism with various weld fillers on laser welding-brazing of Al/Cu lap joint

Influence of Scanning Paths on the Weld Pool Behavior, Microstructure, and Mechanical Property of AA2060 Al-Li Alloy Joints by Laser Beam Oscillation Welding

Effects of material combination for ultrasonic spot welding on microstructure and strength of Al/Al, Al/Cu, and Al/Ni dissimilar joints

Interface and Strength of Laser Impact Welding of Fe-Based Nanocrystalline Alloys to Aluminum

Effect of Ultrasonic Power on Microstructural and Mechanical Properties of Al/Cu Plasma Arc Welding–Brazing Joints

Effect of swinging laser on porosity, microstructure, and mechanical properties of laser welded aluminum alloy joints with different lap forms

Microstructures and Mechanical Properties of Laser Penetration Welding Joint With/Without Ni-Foil in an Overlap Steel-on-Aluminum Configuration

Effect of Ultrasound on Microstructure and Properties of Aluminum–Copper Friction Stir Lap Welding

Laser pressure welding of dissimilar aluminium and copper: microstructure and mechanical property

Effect of nanosecond pulse laser power on welding interface and mechanical properties of AZ31B Mg/6061 Al

Microstructure evolution and mechanical properties of Cu–Al joints by ultrasonic welding