Abstract:Purpose The traditional VeoVa10-VAc copolymer latex, which prepared via the emulsion polymerization of the mixed monomers of VAc and VeoVa10, has the poor water resistance and thermal stability because of the migration of the conventional emulsifier molecules and the low bond energy of C-C bond. The purpose of this work is that the fluorinated monomer is used to modify the latex. The film of the resultant latex has the C-F bond with high bond energy and low surface energy, which can effectively improve the heat resistance and water resistance of the resultant film. In addition, the reactive emulsifier is used to replace the conventional emulsifier. The drawbacks of the conventional emulsifier molecules migrate and desorb can be avoided when the polymer latex is stored, thereby also improving the water resistance. Design/methodology/approach The modified VAc-VeoVa10 latex has been successfully synthesized via the semi-continuous seeded emulsion polymerization, which VAc and VeoVa10 is used as the main monomers and HFMA was used as the functional monomer. KPS and reactive surfactants of SE-10 were used as the initiator and emulsifier, respectively. The structure of resultant latex film was characterized by Fourier transform infrared spectroscopy (FTIR). The latex films were tested by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and contact angle (CA). The particle size and its distribution of the latex were measured by the nano particle size analyzer. Findings The factors that had an influence on the properties of the latex and the film were investigated in detail. The stability of the resultant latex is good. The average particles of the latex and its distribution are small and uniform, respectively. In comparison with the conventional latex film, the thermal stability and hydrophobicity of the resultant latex film are improved obviously. Practical implications The resultant latex can be used in both the waterborne interior and exterior wall coatings, pickering stabilized waterborne polymer dispersions, polymer powders, environmentally friendly polymer-modified waterproof mortar and other fields, which can be satisfied with the high demand of thermal stability and hydrophobicity. Originality/value The modification of poly (VAc-VeoVa10) by reactive surfactant and fluorinated monomer is seldom reported. In this study, the fluorinated poly (VAC-VeoVa) latex is prepared via the reactive surfactants, which VAc and VeoVa10 is used as the main monomers and hexafluorobutyl methacrylate is used as the functional monomer. Potassium persulfate (KPS) and allyl nonyl phenoxy propyl alcohol polyoxyethylene ether ammonium sulfate are used as the initiator and emulsifier, respectively.

Synthesis And Characterization Of Waterborne Fluoropolymers Prepared By The One-Step Semi-Continuous Emulsion Polymerization Of Chlorotrifluoroethylene, Vinyl Acetate, Butyl Acrylate, Veova 10 And Acrylic Acid

Properties and Characterization of Novel Cationic Polyacrylate Latex Containing Fluorine and Silicon Prepared with Soap-Free Emulsion Polymerization

Synthesis and Properties of Novel Fluorinated Cationic Polymer Latex

Preparation and properties of fluorinated VAc-VeoVa10 latex emulsified with allyl nonyl phenoxy propyl alcohol polyoxyethylene ether ammonium sulphate

Synthesis and characterization of fluorinated polyacrylate latex emulsified with novel surfactants

Preparation and Characterization of Fluorinated Acrylate and Epoxy Co-Modified Waterborne Polyurethane

Synthesis and characterization of fluorine-containing polyester based on phthalic anhydride and tetrafluoropropyl glycidyl ether

Preparation and Characterization of the Cross-Linked Fluoro-Silicon Polyacrylate–Polyurethane Hybrid Emulsions for Superior Performance of Waterborne Coatings

Emulsion homopolymerization of chlorotrifluoroethylene toward new waterborne fluorocarbon coatings

Stability of Emulsion Polymerization of New Fluorinated Acrylate Emulsion and Its Characterization

Synthesis of Fluorinated Polyester Used for Hydrophobic Coating: Influence of Fluoroalkyl Group Length on Enrichment Behavior

Hydrophobicity of Polyacrylate Emulsion Film Enhanced by Introduction of Nano-SiO₂ and Fluorine

Synthesis Of Fluoroalkyl-Modified Polyester And Its Application In Improving The Hydrophobicity And Oleophobicity Of Cured Polyester Coatings

Synthesis and Properties of the FA/LMA/MMA Copolymer Emulsion

Preparation and fluorine enrichment behavior of fluorinated polyester

Synthesis and surface property characterization of polyacrylate with short fluorocarbon side chain

Preparation and properties of a novel waterborne fluorinated polyurethane–acrylate hybrid emulsion modified by long aliphatic chains

Synthesis of Fluoro-(Meth) Acrylates and Performance of the UV-Curing Films

Preparation and characterization of fluorine-containing acrylate copolymers by 60Co γ-ray radiation co-polymerization

Study of a Novel Fluorine-Containing Polyether Waterborne Polyurethane with POSS as a Cross-Linking Agent

Synthesis and properties of polyacrylate emulsions modified by fluorine-containing emulsion