Abstract:Spinel-structured lithium nickel manganese oxide (LiNi0.5M1.5O4, LNMO) is a low-cost battery cathode material with a high operating voltage (similar to 4.7 V vs Li+/Li), relatively high capacity (similar to 147 mA h g(-1)), and good rate performance. Previous studies have suggested that large particle size, single-crystal-like morphology, and high phase purity are favorable for achieving good electrochemical performance. However, simultaneous control over these properties is difficult for conventional solid-state synthesis at high temperatures. Here, we report a molten-salt-assisted method to prepare large-size (median grain size D-50 = 16.8 mu m) single-crystal LNMO with molten lithium molybdate (Li2MoO4) serving as the medium of ion diffusion and crystal growth. In situ X-ray diffraction (XRD) studies of the material preparation process reveal structural disorder and formation of the rock-salt impurity phase at high temperatures, which are reverted upon cooling. The correlations between the cooling rate and structural ordering/phase purity at the single-particle level are further studied using correlative scanning electron microscopy and Raman spectroscopy (SEM-Raman) techniques. SEM-Raman studies for the first time reveal that the Ni-rich rock-salt impurity phase actually exists at the interior of the large-size LNMO particles, which is difficult to be detected by conventional XRD or Raman spectroscopy because of limitations in probing depth. We further confirm that slow cooling is the key to increasing structural ordering and enhancing electrochemical performance of LNMO. The optimized LNMO sample shows excellent cycle performance by retaining similar to 85% initial capacity after 300 charge-discharge cycles and acceptable level of rate capability despite its large particle size. Our results highlight the importance of mechanistic studies into material synthesis, which provide the basis for designing better materials and more efficient preparation methods.

Sintering Temperature Induced Evolution of Microstructures and Enhanced Electrochemical Performances: Sol-Gel Derived LiFe(MoO4)(2) Microcrystals As a Promising Anode Material for Lithium-Ion Batteries

Ascorbic Acid-Assisted Solvothermal Synthesis of LiMn 0.9 Fe 0.1 PO 4 /C Nanoplatelets with Enhanced Electrochemical Performance for Lithium Ion Batteries

One-step Synthesis and Effect of Heat-Treatment on the Structure and Electrochemical Properties of LiNi0.5Mn1.5O4 Cathode Material for Lithium-Ion Batteries

Conformal Conversion of Polyphosphazene@Sb2MoO6 Nanowires to N/S-Doped/Carbon-Coated SbPO4/MoOx for High-performance Lithium Storage

One‐Pot Hydrothermal Synthesis of FeMoO4 Nanocubes as an Anode Material for Lithium‐Ion Batteries with Excellent Electrochemical Performance

Evolution of Spinel LiMn 2 O 4 Single Crystal Morphology Induced by the Li 2 MnO 3 Phase during Sintering

Improved electrochemical performance of nano-crystalline Li 2 FeSiO 4 /C cathode material prepared by the optimization of sintering temperature

Effect of Sintering-method on Electrochemical Performance of LiFePO_4/C Cathode Material

In Situ Heating-Induced Loading of Anion-Rich Vacancy Mo–Fe1-xS Nanoparticles on Mesoporous Carbon for High-Performance Sodium-Ion Batteries

Nanostructured Iron Fluoride Derived from Fe-Based Metal-Organic Framework for Lithium Ion Battery Cathodes.

Controllable Growth of LiMn2O4 by Carbohydrate-Assisted Combustion Synthesis for High Performance Li-ion Batteries

Synthesis of Nano-Sized FePO4 Cathode Material via a Microemulsion Technique

Structural evolution and formation mechanism of LiNi0.6Co0.2Mn0.2O2 during high-temperature solid-state synthesis

Controlling Particle Size and Phase Purity of "Single-Crystal" LiNi0.5Mn1.5O4 in Molten-Salt-Assisted Synthesis

Realization of Superior Electrochemical Performances for ZnMoO4 Anode Material Through the Construction Strategy of 3D Flower-Like Single Crystalline

Topotactic Phase Transformation of Lithiated Spinel to Layered LiMn0.5Ni0.5O2: The Interaction of 3-D and 2-D Li-ion Diffusion

Fe3O4 Submicron Spheroids As Anode Materials for Lithium-Ion Batteries with Stable and High Electrochemical Performance

Structure Evolution from Layered to Spinel during Synthetic Control and Cycling Process of Fe-Containing Li-Rich Cathode Materials for Lithium-Ion Batteries

Monitoring the morphology evolution of LiNi0.8Mn0.1Co0.1O2 during high-temperature solid state synthesis via in situ SEM

Synthesis and characterization of Li(Li0.23Mn 0.47Fe0.2Ni0.1)O2 cathode material for Li-ion batteries

Preparation and electrochemical performance of LiNi0.5Mn1.5O4 spinels with different particle sizes and surface orientations as cathode materials for lithium-ion battery