Abstract:Study of nonlinear laser-matter interactions in 2D materials has promoted development of photonics applications. As a typical MXene material, molybdenum carbide (Mo2C) has attracted much attention because of its graphene-like structure. Here, a type of D-shaped fiber (DF)-buried Mo2C saturable absorber (SA) fabricated by magnetron-sputtering deposition (MSD) and sol-gel technique is reported. The Mo2C material was buried between the bottom DF and the upper amorphous silica fabricated by sol-gel technology. Therefore, the DF-based SA effectively solves the problem of material shedding and aging, thus improving the stability and damage threshold of the fiber laser. Application of the SA in erbium-doped fiber laser and stable passive Q-switched operation with a maximum pulse energy of 430.47 nJ is realized. By adjusting the polarization state and pump power, high-power mode-locked pulses are generated with a pulse duration and output power of 199 fs and 54.13 mW, respectively. Further, bound-state soliton pulses are obtained with a pulse width of 312 fs and soliton interval of 1.26 ps for the first time based on MXene materials. Moreover, by application of the SA in ytterbium-doped fiber lasers, a stable dissipative soliton mode-locked pulse is obtained with a pulse width of 23 ps. These results indicate that the DF-based buried Mo2C as a novel SA provides a reliable method for all-fiber and multifunctional high-power ultrafast laser.

Sub-200 fs soliton mode-locked fiber laser based on bismuthene saturable absorber.

Few-layer bismuthene for femtosecond soliton molecules generation in Er-doped fiber laser

Bismuth oxysulfide nanosheets as a novel saturable absorber for Er-doped and Tm-doped ultrafast fiber lasers

1450 Nm High Energy Noisy Multi-Pulse Mode-Locking in Bismuth-Doped Fiber Laser

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Generation of trapezoidal envelope pulses and soliton rains from passively mode-locked fiber laser with MoS2 saturable absorber on microfiber

Passively Q-switched and mode-locking fiber laser based on Sb2S3 saturable absorber

Erbium-Doped Fiber Laser Mode-Locked with a Few-Layer MoS<inf>2</inf> Saturable Absorber

Erbium-doped fiber laser mode-locked with a few-layer MoS2 saturable absorber

Passively Q-switched erbium-doped fiber laser based on two-dimensional boron carbide nanoparticles as saturable absorber

Versatile soliton emission from a WS2 mode-locked fiber laser

L-band passively mode-locked fiber laser based on WS<inf>2</inf> saturable absorber

Highly Stable Passively Q-Switched Erbium-Doped All-Fiber Laser Based on Niobium Diselenide Saturable Absorber

Dissipative Soliton Generation From Yb-Doped Fiber Laser Modulated by Mechanically Exfoliated NbSe2

Molybdenum Carbide Buried in D-Shaped Fibers As a Novel Saturable Absorber Device for Ultrafast Photonics Applications

Dual-wavelength all-fiber Q-switched fiber laser using bismuth-doped fiber as saturable absorber

Er-doped fiber lasers with all-fiber dispersion management based on Cr2Sn2Te6 saturable absorbers

Generation of soliton molecules in a 1.5-μm ultrafast fiber laser based on Zinc 2,5-dihydroxyterephthalate saturable absorber

Sub-90 Fs Dissipative-Soliton Erbium-doped Fiber Lasers Operating at 16 Μm Band

Stable Broadband Fiber-Coupled Near Infrared Light Sources Based on a Bismuth Heavily Doped Aluminosilicate Optical Fiber

Sub-90 fs dissipative-soliton Erbium-doped fiber lasers operating at 1.6 μm band.