Abstract:A new all-fiber structured saturable absorber, consisting of graded index multimode fiber-no-core fiber-graded index multimode fiber (GIMF–NCF–GIMF), in a passively mode-locked erbium-doped fiber laser is proposed and demonstrated. The conventional solitons with a center wavelength of 1575.5 nm, a pulse width of 707 fs, and a signal-to-noise ratio of 66 dB are generated at the repetition frequency of 18.919 MHz. The different lengths of each part of the saturable absorber (SA) can usually allow the fiber laser system to reach mode-locking, which shows that the length limits on this SA can not be quite as serious. Meanwhile, by only adjusting the polarization controller, tightly bound solitons and loosely bound solitons can be readily generated. The pulse trains of tightly bound solitons exhibit a separation of 1.52 ps, a pulse width of ∼850 fs, and centered at 1573 nm, whereas the pulse separation of loose bound solitons are from 23 ps to 58 ps, which shows wide variations of the time dispersion. More importantly, it is found that tightly bound solitons and loosely bound solitons can exist simultaneously for higher-order solitons, for the first time to the best of our knowledge. Such an SA is easy to fabricate, highly stable and of low cost, and has high potential in ultrafast photonics.

Few-layer bismuthene for femtosecond soliton molecules generation in Er-doped fiber laser

Sub-200 fs soliton mode-locked fiber laser based on bismuthene saturable absorber.

Bismuth oxysulfide nanosheets as a novel saturable absorber for Er-doped and Tm-doped ultrafast fiber lasers

Topological insulator: Bi2Se3/polyvinyl alcohol film-assisted multi-wavelength ultrafast erbium-doped fiber laser

1450 Nm High Energy Noisy Multi-Pulse Mode-Locking in Bismuth-Doped Fiber Laser

Generation of soliton molecules in a 1.5-μm ultrafast fiber laser based on Zinc 2,5-dihydroxyterephthalate saturable absorber

Erbium-Doped Fiber Laser Mode-Locked with a Few-Layer MoS<inf>2</inf> Saturable Absorber

Single and Bunch Soliton Generation in Optical Fiber Lasers Using Bismuth Selenide Topological Insulator Saturable Absorber

Graphene/WS2 Heterostructure Saturable Absorbers for Ultrashort Pulse Generation in L-band Passively Mode-Locked Fiber Lasers.

Erbium-doped fiber laser mode-locked with a few-layer MoS2 saturable absorber

Dissipative Soliton Generation From Yb-Doped Fiber Laser Modulated by Mechanically Exfoliated NbSe2

Generation and evolution of bright-dark solitons in Er-doped fiber laser based on ZrTe 2 as saturable absorber

CVD-Bi2Te3 as a saturable absorber for various solitons in a mode-locked Er-doped fiber laser

Tunable sub-300 fs soliton and switchable dual-wavelength pulse generation from a mode-locked fiber oscillator around 2.8 µm.

In Situ Instant Generation of an Ultrabroadband Near-Infrared Emission Center in Bismuth-Doped Borosilicate Glasses Via a Femtosecond Laser

Generation of conventional solitons and bound state solitons in a passively mode-locked fiber laser based on GIMF–NCF–GIMF structured saturable absorber

Tunable sub-300 fs soliton and switchable dual-wavelength pulse generation from a mode-locked fiber oscillator around 2.8 m

Dissipative soliton generation in Er-doped fiber laser mode-locked by Sb2Te3 topological insulator

A femtosecond pulse erbium fiber laser incorporating a saturable absorber based on bulk-structured Bi2Te3 topological insulator

Versatile soliton emission from a WS2 mode-locked fiber laser

Generation of Dissipative Soliton in Erbium-doped Fiber Laser Passively Mode Locked by InSb Saturable Absorber