Abstract:In this article, a low-energy chirp-pulsed radar thermography (CP-RT) is used to detect the subsurface delamination of carbon fiber reinforced polymer (CFRP) composite as nondestructive testing and evaluation (NDT&E) techniques. The CFRP specimen with artificial flat-bottom holes (FBHs) is prepared for NDTandE by chirp-pulsed radar thermography. Two lasers are employed to be external excitation heat sources. The laser intensities are modulated according to a chirp-pulsed radar signal that combines linear frequency modulation and pulse excitation, and the temperature rise is controlled within 2 °C in the experiment. The thermal-wave response signal is processed by a series of different postprocessing characteristic extraction algorithms. These algorithms include time–frequency algorithms [crosscorrelation algorithm (CC), fast Fourier transform (FFT), and dual-orthogonal demodulation algorithm (DOD)] and statistical analysis approaches [principal component analysis (PCA) and PCA-based reconstructed independent component analysis (PCA-RICA)]. The signal-to-noise ratio (SNR) of defects is employed to evaluate the defect detectability for different size defects by different postprocessing algorithms. A three-dimensional (3-D) tomography method based on the FFT phase characteristic is proposed. A truncated-correlation photothermal tomography based on DOD is also introduced to enable the 3-D tomography of CFRP specimen. The FFT phase presents a relatively high SNR and has good correlation with the depth of the defect. The FFT-based CP-RT has the potential to provide a rapid NDT&E and 3-D tomography approach for CFRP with subsurface defects under the low-energy excitation condition.

Optical Excitation Fractional Fourier Transform (frft) Based Enhanced Thermal-Wave Radar Imaging (TWRI).

Optimization of Thermal-Wave Radar Thermography by Transverse Heat Flow Suppression Technique for Accurate Defect Detection of CFRP Laminates

Surface wave illumination Fourier ptychographic microscopy.

The Feature Recognition of CFRP Subsurface Defects Using Low-Energy Chirp-Pulsed Radar Thermography

Time-Frequency Based Thermal Imaging: An Effective Tool for Quantitative Analysis

Adaptive Total Focusing Method for Ultrasonic Full-Matrix Imaging of Anisotropic CFRP Laminates

Comparative Analysis of Single- and Multiple-Frequency Thermal Wave Radar Imaging Inspection of Glass Fiber Reinforced Polymer (GFRP)

Wavenumber-Domain Fast Reconstruction Technique Using Ultrasonic Scanning for Transverse Wave Imaging

Feature Recognition in Quadratic Frequency Modulated Thermal Wave Imaging for Subsurface Defect Detection in Fiber-Reinforced Polymers

High-resolution Imaging of a High-Speed Target Based on a Reconfigurable Photonic Fractional Fourier Transformer.

Advanced Orthogonal Frequency and Phase Modulated Waveform for Ultrasonic Phased Array TFM Detection in CFRP Composites

Quantitative non-destructive evaluation of CFRP delamination defect using laser induced chirp-pulsed radar photothermal tomography

Multi-frequency Fused Lock-in Thermography in Detecting Defects at Different Depths

Induction Infrared Thermography and Thermal-Wave-Radar Analysis for Imaging Inspection and Diagnosis of Blade Composites

Spatio-Temporal 3-D Residual Networks for Simultaneous Detection and Depth Estimation of CFRP Subsurface Defects in Lock-In Thermography

Automatic Detection of CFRP Subsurface Defects via Thermal Signals in Long Pulse and Lock-In Thermography

High-Resolution Terahertz Imaging of Debonding Defects in Thermal Barrier Coatings Using an Optimal Wavelet Transform

3D photothermal reconstruction of subsurface defects in notched multidirectional CFRP laminates due to tensile fatigue loading

Design Concept of a Low-Terahertz Imaging Radar

Detection and identification of delamination defects in CFRP laminates using nonlinear frequency-modulated infrared thermal wave testing technology

Real Aperture Continuous Terahertz Imaging System and Spectral Refinement Method