Abstract:Atomic force microscopy (AFM) is widely used to examine the 3-D structure in a few nanometer resolutions for numerous fields. However, the scan performance of 3-D profiles for sidewall structures may be significantly influenced by inherent AFM probe shape. To address the above issue, a novel 3-D AFM system integrated with a rotary sample stage has been introduced, providing the sample with the freedom to rotate and enabling omnidirectional scanning. First, based on optical imaging, an optimized calibration method is proposed to determine the center of the rotary stage, which is then aligned with the probe tip. Next, a geometrical assessment of the admissible sidewall orientations (ASOs) for the Akiyama probe is also presented. After the initial AFM scan, the orientations of the sample sidewalls with respect to the scan coordinate system can be derived using the proposed local sidewall orientation analysis (LSOA). Generally speaking, the sidewall scan has better quality if its orientation is transverse to the tip's scan direction and if the sidewall is on the "rising" edge (rather than the "falling" edge), rendering that a single AFM scan is unlikely to secure good quality of all sidewalls with versatile orientations. Therefore, based on the results of ASO and LSOA, we propose a sample rotation planning algorithm (SRPA) to determine the minimal number of sample rotations via the rotary stage and their corresponding rotation angles to seek high scan quality of all sidewalls provided that multiple AFM scans proceed subsequently after each sample rotation. Next, an effective fusion protocol based on the iterative-closest-point (ICP) method is also presented to accurately merge the 3-D point clouds of the scan topography from the multiple AFM scans with respect to different sample rotations. To verify the effectiveness of the proposed omnidirectional 3-D AFM, extensive experiments with both square island samples and cylinder samples are conducted to demonstrate the high-precision sidewall scanning, regardless of the limitation of the AFM scan due to the adverse probe geometry. To this end, various quantitative metrics are employed to evaluate the scanning quality of the proposed work, showing the high promise of the research in this article.

Three-Dimensional Atomic Force Microscopy for Sidewall Imaging Using Torsional Resonance Mode.

Towards High Accuracy Surface Profile Characterization in Atomic Force Microscopy

Advances of Confocal Microscopy in Three-Dimensional Surface Topography Measurement

Surface Profile Measurement of Micro-Optics by Using a Long Stroke Atomic Force Microscope

Omnidirectional 3-D AFM Integrated With a Rotary Stage for High-Precision Sidewall Structure

Improved Sensitivity for Subsurface Imaging by Contact Resonance Atomic Force Microscopy Using Fano Peaks

Three-dimensional atomic force microscopy based on tailored cantilever probe with flared tip

Measurement of Sub-Surface Microstructures Based on a Developed Ultrasonic Atomic Force Microscopy

Rapid Measurement Of A High Step Microstructure With 90 Degrees Steep Sidewall

360° Multiparametric Imaging Atomic Force Microscopy: A Method for Three-Dimensional Nanomechanical Mapping.

A dual-probe three-dimensional profile measurement system

A Novel Atomic Force Microscope with High Stability and Scan Speed

Multi-mode Dynamic Atomic Force Microscope System

A Horizontal Atomic Force Microscope and Its Applications

Atomic Force Microscope in Liquid with A Specially Designed Probe for Practical Application

A Large-Sample Atomic Force Microscope Observing in Both Air and Liquid

A 3D surface nanomechanical property mapping method with a magnetic-drive orthogonal cantilever probe

Wide-range length metrology by dual-imaging-unit atomic force microscope based on porous alumina.

A new type of atomic force microscope with multi-scanners

Do we really need more intensive care unit beds?

High-speed atomic force microscopy in ultra-precision surface machining and measurement: challenges, solutions and opportunities