Abstract:Lead-based halide perovskites (APbX3, where A = organic or inorganic cation, X = Cl, Br, I) are suitable materials for many optoelectronic devices due to their many attractive properties. However, the concern of lead toxicity and the poor ambient and operational stability of the organic cation group greatly limit their practical utilization. Therefore, there has recently been great interest in lead-free, environment-friendly all-inorganic halide perovskites (IHPs). Sb and Sn are common species suggested to replace Pb for Pb-free IHPs. However, the large difference in the melting points of the precursor materials (e.g., CsBr and SbBr3 precursors for Cs3Sb2Br9) makes the chemical vapor deposition (CVD) growth of high-quality Pb-free IHPs a very challenging task. In this work, we developed a two-step CVD method to overcome this challenge and successfully synthesized Pb-free Cs3Sb2Br9 perovskite microplates. Cs3Sb2Br9 microplates ∼25 μm in size with the exciton absorption peak at ∼2.8 eV and a band gap of ∼2.85 eV were obtained. The microplates have a smooth hexagonal morphology and show a large Stokes shift of ∼450 meV and exciton binding energy of ∼200 meV. To demonstrate the applications of these microplates in optoelectronics, simple photoconductive devices were fabricated. These photodetectors exhibit a current on/off ratio of 2.36 × 102, a responsivity of 36.9 mA/W, and a detectivity of 1.0 × 1010 Jones with a fast response of rise and decay time of 61.5 and 24 ms, respectively, upon 450 nm photon irradiation. Finally, the Cs3Sb2Br9 microplates also show good stability in ambient air without encapsulation. These results demonstrate that the 2-step CVD process is an effective approach to synthesize high-quality all-inorganic lead-free Cs3Sb2Br9 perovskite microplates that have the potential for future high-performance optoelectronic device applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c07839.Schematic illustration of the two-step chemical vapor deposition synthesis of Cs3Sb2Br9 perovskite microplates; XRD patterns after each step of Cs3Sb2Br9 perovskite microplate synthesis; XRF spectrum of as-grown sample before annealing; optical images of Cs3Sb2Br9 microplates on different substrates; AFM images and XRF spectrum of Cs3Sb2Br9 microplates; SEM image and EDX spectrum of a single 3D structure; ellipsometric experimental and simulated spectra of Ψ and Δ for Cs3Sb2Br9 perovskite microplates; experimental data and modeled plot for ε2 along with different T–L oscillators of Cs3Sb2Br9 microplates; best fit parameters for the Tauc–Lorentz oscillators; UV–vis absorption spectrum; incident power density dependent photocurrent of the device; power-dependent photocurrent plot and the corresponding power law fitted curve; dark I–V plot of the device used to calculate trap state density; comparison of the XRD patterns of Cs3Sb2Br9 microplates between fresh and after storage in ambient; rocking curve for (201) plane of Cs3Sb2Br9 microplates fresh and after storage for 2 months in ambient condition; comparison of the photoresponse of the photodetector between fresh and after 2 months storage in ambient condition (PDF)This article has not yet been cited by other publications.

Two-Step Growth of 2D Organic-Inorganic Perovskite Microplates and Arrays for Functional Optoelectronics.

Periodic Organic–Inorganic Halide Perovskite Microplatelet Arrays on Silicon Substrates for Room‐Temperature Lasing

Controlled Growth and Reliable Thickness‐Dependent Properties of Organic–Inorganic Perovskite Platelet Crystal

Wafer-scale growth of large arrays of perovskite microplate crystals for functional electronics and optoelectronics

Two‐dimensionalization of 3D Perovskites for Passive Narrowband Photodetection

Liquid Epitaxial Growth of Two-dimensional Non-layer structured hybrid Perovskite

Controllable growth of centimeter-size 2D perovskite heterostructural single crystals for highly narrow dual-band photodetectors

2D Perovskite Single Crystals for Photodetectors: From Macro‐ to Microscale

Recent progress of two‐dimensional lead halide perovskite single crystals: Crystal growth, physical properties, and device applications

Orthogonal Lithography for Halide Perovskite Optoelectronic Nanodevices.

Surface-Tension-Dominant Crystallization of 2D Perovskite Single Crystals for Vertically Oriented Hetero-/Homo-Structure Photodetectors.

Probing Phase Distribution in 2D Perovskites for Efficient Device Design.

Structure and Growth Control of Organic-Inorganic Halide Perovskites for Optoelectronics: from Polycrystalline Films to Single Crystals

Pattern-Selective Molecular Epitaxial Growth of Single-Crystalline Perovskite Arrays toward Ultrasensitive and Ultrafast Photodetector

2D Ruddlesden–Popper Perovskites for Optoelectronics

Controllable Growth of Two-Dimensional Perovskite Microstructures

Two-Step Chemical Vapor Deposition-Synthesized Lead-Free All-Inorganic Cs 3 Sb 2 Br 9 Perovskite Microplates for Optoelectronic Applications

Tailoring Interlayer Charge Transfer Dynamics in 2D Perovskites with Electroactive Spacer Molecules

Two‐Dimensional Metal‐Halide Perovskite‐based Optoelectronics: Synthesis, Structure, Properties and Applications

Photophysics of defect-passivated quasi-2D (PEA)2PbBr4 perovskite using an organic small-molecule

Review on Organic–Inorganic Two-Dimensional Perovskite-Based Optoelectronic Devices