Abstract:The insufficient ionic conductivity of oxide-based solid electrolytes and the large interfacial resistance between the cathode material and the solid electrolyte severely limit the performance of room-temperature all-solid-state sodium rechargeable batteries. A NASICON solid electrolyte Na3.4Zr1.9Zn0.1Si2.2P0.8O12, with superior room-temperature conductivity of 5.27 × 10–3 S cm–1, is achieved by simultaneous substitution of Zr4+ by aliovalent Zn2+ and P5+ by Si4+ in Na3Zr2Si2PO12. The bulk conductivity and grain boundary conductivity of Na3.4Zr1.9Zn0.1Si2.2P0.8O12 are nearly 20 times and almost 50 times greater than those of pristine Na3Zr2Si2PO12, respectively. The FeS2||polydopamine-Na3.4Zr1.9Zn0.1Si2.2P0.8O12||Na all-solid-state sodium batteries, with a polydopamine modification thin layer between the solid electrolyte and the cathode, maintain a high reversible capacity of 236.5 mAh g–1 at a 0.1 C rate for 100 cycles and a capacity of 133.1 mAh g–1 at 0.5 C for 300 cycles, demonstrating high performance for all-solid-state sodium batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.0c01432?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.0c01432</a>.Experimental section; XRD, NPD, SEM, and EIS measurements for different solid electrolyte materials; STEM-EDS and DC polarization measurement for Zn0.1 sample; EDS measurement for Zn0.1 sample before and after contact with sodium; unit cell parameters of different solid electrolyte materials; structural parameters of different solid electrolyte materials; BVEL analysis and the comparison of bottleneck sizes; conductivities, activation energies, and relative densities of different solid electrolyte materials; FTIR measurement for Zn0.1 pellet with and without PDA layer; charge–discharge curves of FeS2||Zn0.1||Na all-solid-state battery; comparison of conductivities and battery performances reported in the literature and in this work; cross-sectional images of the cathode/electrolyte interface before and after cycling (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.0c01432/suppl_file/nz0c01432_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Exceptionally High Ionic Conductivity in Na3 P0.62 As0.38 S4 with Improved Moisture Stability for Solid-State Sodium-Ion Batteries.

Anomalous High Ionic Conductivity of Nanoporous Β-Li3ps4

Air-stable, high-conduction solid electrolytes of arsenic-substituted Li4SnS4

In Situ Forming Na─Sn Alloy/Na2S Interface Layer for Ultrastable Solid State Sodium Batteries

Achievement of high ionic conductivity and electrochemical stability by W/Sn-doped Na3SbS4 conductors designed for all-solid-state sodium-ion batteries

Design Principles for Cation‐Mixed Sodium Solid Electrolytes

Tungsten and Boron Codoping toward High Ionic Conductivity and Stable Sodium Solid Electrolyte for All-Solid-State Sodium Batteries

Aliovalent dual element co-assisted strategy to enhance ionic conductivity and stability of NASICON-type solid electrolyte for all-solid-state sodium batteries

Zn doping for enhanced sodium-ion conductivity and air stability in Na3SbS4 solid electrolyte

Enhanced ionic conductivity of Cu-doped NASICON solid electrolyte for solid-state sodium batteries

Design and synthesis of the superionic conductor Na10SnP2S12

Fast Sodium-Ion Conduction in a Novel Conjuncto-Hydroborate of Na4B20H18

Ultrastable All-Solid-State Sodium Rechargeable Batteries

Synthesis and Understanding of Na11Sn2PSe12 with Enhanced Ionic Conductivity for All-Solid-state Na-ion Battery

A Na-rich Fluorinated Sulfate Anti-Perovskite with Dual Doping As Solid Electrolyte for Na Metal Solid State Batteries

Si3N4-Assisted Densification Sintering of Na3Zr2Si2PO12 Ceramic Electrolyte toward Solid-State Sodium Metal Batteries

A Quaternary Sodium Superionic Conductor - Na10.8Sn1.9PS11.8

Preparation of Metal-Oxide-Doped Li7P2S8Br0.25I0.75 Solid Electrolytes for All-Solid-State Lithium Batteries

NASICON-structured Na3.1Zr1.95Mg0.05Si2PO12 solid electrolyte for solid-state sodium batteries

Flexible composite solid electrolyte with 80 wt% Na<sub>3.4</sub>Zr<sub>1.9</sub>Zn<sub>0.</sub><sub>1</sub>Si<sub>2</sub ><sub>.</sub><sub>2</sub>P<sub>0</sub><sub>.</sub><sub>8</sub>O<sub>12</ sub> for solid-state sodium batteries

Bi2O3-Assisted Sintering of Na3Zr2Si2PO12 Electrolyte for Solid-State Sodium Metal Batteries