Abstract:Fiber photodetectors (FPDs) are promising candidates for wearable applications due to their flexibility, knittability, and full-angle detection. The current state-of-the-art FPDs based on inorganic photosensitive materials show drawbacks in mechanical flexibility. The organic FPDs (OFPDs) are superior, while the fabrication is limited by multi-layer process compatibility issues. Herein, a diode-type five-layer OFPD with Zn/ZnO/PBDB-T:ITIC-Th/MoO3/PEDOT:PSS structure is prepared by combining thermal evaporation with a successive dip-coating method. It is worth mentioning that the uniform coaxial MoO3 interfacial layer is processed by the proposed fiber-compatible thermal evaporation technique, while the other functional layers are enabled by the solution-based dip-coating method. At the bias of -0.5 V, the optimized OFPD exhibits a dark current density of 8.46 x 10-8 A cm-2, a responsivity of 86.4 mA W-1 (@ 760 nm), and a specific detectivity of over 1011 Jones in the visible range of 400-760 nm. Besides, the device displays a fast response speed of 0.44 and 0.14 ms for rise and fall time, showing the capability of full-angle detection. The device is demonstrated in photoplethysmography for real-time heart-rate monitoring, suggesting its potential for practical application in wearable electronics. A multilayer coaxial organic fiber photodetector (OFPD) is prepared by combining a self-designed fiber-compatible thermal evaporation technique with the mature dip-coating method, efficiently addressing the process compatibility issue of multi-layer fiber devices. The obtained OFPD shows typical diode characteristics, thus leading to a low dark current density of 8.46 x 10-8 A cm-2 and a D*of over 1011 Jones. image

Towards An All-In Fiber Photodetector By Directly Bonding Few-Layer Molybdenum Disulfide To A Fiber Facet

High-Sensitivity Optical-Fiber-Compatible Photodetector with an Integrated Cspbbr3-Graphene Hybrid Structure

Polarization-sensitive Photodetectors Based on Three-Dimensional Molybdenum Disulfide (mos2) Field-Effect Transistors

Fabry-Perot interference and piezo-phototronic effect enhanced flexible MoS2 photodetector

High Responsivity Photodetector Based on Monolayer Molybdenum Disulfide (MoS 2 )

Heterostructures: Broadband Optical‐Fiber‐Compatible Photodetector Based on a Graphene‐MoS2‐WS2 Heterostructure with a Synergetic Photogenerating Mechanism (adv. Electron. Mater. 1/2019)

All-Fiber Light Intensity Detector Based on an Ionic-Liquid-Adorned Microstructured Optical Fiber

Ultrasensitive and broadband MoS2 photodetector driven by ferroelectrics

All-fiber Device for Single-Photon Detection

Broadband photodetection using one-step CVD-fabricated MoS2/MoO2 microflower/microfiber heterostructures

Photodetectors Based on Two-Dimensional MoS2 and Its Assembled Heterostructures

Ultrasensitive monolayer-MoS2 heterojunction photodetectors realized via an asymmetric Fabry-Perot cavity

Improving Process Compatibility of Multilayer Organic Fiber Photodetectors by Combining Coaxial Thermal Evaporation with Dip‐Coating

Sandwiched WS2/MoTe2/WS2 Heterostructure with a Completely Depleted Interlayer for a Photodetector with Outstanding Detectivity

High Sensitive and Stable UV-Vis Photodetector Based on MoS 2 /MoO 3 vdW Heterojunction

High-Sensitivity Self-Powered Photodetector Fibers Using Hierarchical Heterojunction Photoelectrodes Enable Wearable Amphibious Optoelectronic Textiles

Multimechanism Synergistic Photodetectors with Ultrabroad Spectrum Response from 375 Nm to 10 Μm.

High performance multifunction-in-one optoelectronic device by integrating graphene/MoS 2 heterostructures on side-polished fiber

UV to NIR Broadband Flexible Photodetector Based on Solution‐Processed MoS2/PDPP3T Inorganic–Organic Hybrid Heterostructures

2D materials-based photodetectors combined with ferroelectrics

Interlayer sensitized van der Waals heterojunction photodetector with enhanced performance