Abstract:Ni-rich cathode (Ni > 0.8) provides a low-cost and high-energy-density solution to the next-generation lithium-ion batteries. Unfortunately, severe capacity fading of Ni-rich cathode caused by the interfacial and bulk structural degradation impeded its application. Herein, Zr doping and Li6Zr2O7 coating are applied to a Ni-rich LiNi0.83Co0.12Mn0.05O2 (NCM) layered cathode material, and the modified material exhibits excellent cycle stability. The 1%Zr-NCM cathode material maintains a discharge capacity of 173.9 mAh g–1 at 1 C after 200 cycles in the 2.5–4.3 V voltage range at 25 °C, corresponding to a capacity retention of 94.6%; however, the unmodified NCM only delivers 129.9 mAh g–1 (capacity retention 68.6%). The synergistic effect of bulk Zr doping and surface Li6Zr2O7 coating improves the cycle stability of the Ni-rich material. Zr doped into the bulk could form a strong Zr–O bond to stabilize the layered structure, and Zr located in the Li layer can act as a pillar to maintain the layered structure and reduce Li+/Ni2+ mixing. In addition, the Li6Zr2O7 coating layer can also play a dual role in promoting Li+ migration and suppressing surface side reactions. This work demonstrates that sufficiently utilizing zirconium to enhance the electrochemical performance of cathode materials is a feasible and promising strategy.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01851?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01851</a>.Rietveld refinement results; SEM images and EDS mapping of precursor and Zr-modified precursor; linear sweep EDS of 1%Zr-NCM; EDS mapping of 0.5%Zr-NCM and 1%Zr-NCM; XPS spectra; rate capability; and XRD results after cycling test (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01851/suppl_file/ae0c01851_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High-Conductive AZO Nanoparticles Decorated Ni-Rich Cathode Material with Enhanced Electrochemical Performance.

Ultrasound-induced elevation of interlayer spacing and conductivity of CoNi hydroxides for high-performance Ni-Zn batteries

Aluminum-doping-based Method for the Improvement of the Cycle Life of Cobalt–nickel Hydroxides for Nickel–zinc Batteries

Al2O3-Coated, Single Crystal Zr/Y co-Doped High-Ni NCM Cathode Materials for High-Performance Lithium-Ion Batteries

3D Co‐Doping α‐Ni(OH)2 Nanosheets for Ultrastable, High‐Rate Ni‐Zn Battery

Effect of Zr–Y Double Doping and Al2O3 Coating on Properties of Nickel-Rich Monomer LiNi0.6Co0.2Mn0.2O2 Cathode Material for Li-Ion Batteries

Zn-induced formation of polymetallic carbonate hydroxide cathodes with high mass loading for high performance aqueous alkaline Zn-based batteries

Elevating Cycle Stability and Reaction Kinetics in Ni‐Rich Cathodes Through Tailored Bulk and Interface Chemistry for Sulfide‐Based All‐Solid‐State Lithium Batteries

Integrated Surface Modulation of Ultrahigh Ni Cathode Materials for Improved Battery Performance

Al 2 O 3 -Doped ZnO Coating of Carbon Nanotubes As Cathode Material for Lithium-Sulfur Batteries

Surface optimized P2-Na2/3Ni1/3Mn2/3O2 cathode material via conductive Al-doped ZnO for boosting sodium storage

Amorphous Li2ZrO3 nanoparticles coating Li[Li0·17Mn0·58Ni0.25]O2 cathode material for enhanced rate and cyclic performance in lithium ion storage

Utilizing Diverse Functions of Zirconium to Enhance the Electrochemical Performance of Ni-Rich Layered Cathode Materials

Amorphous Ni-Co-S nanocages assembled with nanosheet arrays as cathode for high-performance zinc ion battery

Effect of Lithium to Zirconium Ratio on Microstructure and Electrochemical Performances of LZO Modified LiNi0.8Co0.1Mn0.1O2 Cathode Materials

Dual-Element-Modified Single-Crystal LiNi 0.6 Co 0.2 Mn 0.2 O 2 as a Highly Stable Cathode for Lithium-Ion Batteries

Nanosheet-structured ZnCo-LDH microsphere as active material for rechargeable zinc batteries

Improving the Performance of LiNi0.9Co0.05Mn0.05O2 via Atomic Layer Deposition of ZnxOy Coating

Rational Design of Bimetallic Zeolitic Imidazolate Framework‐Derived C, N Dual‐Doped ZnO/Co for Boosting Lithium Storage

Boosting cell performance of LiNi0.8Co0.1Mn0.1O2 cathode material via structure design

Improvement of long-term cycling performance of high-nickel cathode materials by ZnO coating