Abstract:To achieve efficient polymer solar cells (PSCs) with full utilization of the whole spectrum, the multi-component devices are of great importance to be deeply explored, especially for their capability of one-step fabrication. However, the research about one same binary system simultaneously derivated various multi-component PSC is still very limited. Herein, we achieved the whole constructions from one binary host to different ternary systems and even the quaternary one. The ternary strategies with fullerene acceptor, PC71BM, and non-fullerene acceptor, BT6IC-BO-4Cl, as the third component, both boosted the device efficiencies of PBT4Cl-Bz: IT-4F binary system from about 9% to comparatively beyond 11%. Despite the comparable improvement of performance, there existed other similarities and differences in two ternary strategies. In detail, the isotropic carrier transport of PC71BM which largely elevated the fill factor (FF) in the corresponding devices, while the strong absorption of BT6IC-BO-4Cl enhanced the short current density (Jsc) most. More interestingly, quaternary devices based on PBT4Cl-Bz: IT-4F: PC71BM: BT6IC-BO-4Cl could combine both advantages of fullerene and non-fullerene ternary strategies, further pumped the Jsc from 16.44 to the highest level of 19.66 mA cm−2 among all devices, eventually resulted in an optimized efficiency of 11.69%. It reveals that both fullerene and non-fullerene ternary strategies have their unique feature to elevate the device performance either by efficient isotropic carrier transport or better coverage of whole sunlight spectrum and easy tunable energy levels from organic materials. The key is how to integrate the two pathways in one system and provide a more competitive solution facing high-quality PSCs.

Ternary-Blend Polymer Solar Cells Combining Fullerene and Nonfullerene Acceptors to Synergistically Boost the Photovoltaic Performance

Using Ternary Blend As a Strategy to Improve the Driving Force for Charge Transfer and Facilitate Electron Transport in Polymer Solar Cells

Ternary Polymer Solar Cells with High Efficiency of 14.24% by Integrating Two Well‐Complementary Nonfullerene Acceptors

Small Molecule Ternary Solar Cell with Two Synergistic Electron Acceptors for Enhanced Photovoltaic Performance

Ternary Blended Fullerene‐Free Polymer Solar Cells with 16.5% Efficiency Enabled with a Higher‐LUMO‐Level Acceptor to Improve Film Morphology

Efficient Ternary Organic Solar Cells Enabled by the Integration of Nonfullerene and Fullerene Acceptors with a Broad Composition Tolerance

From Binary to Ternary: Improving the External Quantum Efficiency of Small‐Molecule Acceptor‐Based Polymer Solar Cells with a Minute Amount of Fullerene Sensitization

Chlorinated polymer solar cells simultaneously enhanced by fullerene and non-fullerene ternary strategies

High-efficiency Small-Molecule Ternary Solar Cells with a Hierarchical Morphology Enabled by Synergizing Fullerene and Non-Fullerene Acceptors

Highly Efficient Parallel-Like Ternary Organic Solar Cells

High Voc Ternary Nonfullerene Polymer Solar Cells with Improved Efficiency and Good Thermal Stability

Highly Efficient Ternary Solar Cells with Efficient Förster Resonance Energy Transfer for Simultaneously Enhanced Photovoltaic Parameters

Combining Fused‐Ring and Unfused‐Core Electron Acceptors Enables Efficient Ternary Organic Solar Cells with Enhanced Fill Factor and Broad Compositional Tolerance

Ternary Nonfullerene Polymer Solar Cells with a Power Conversion Efficiency of 11.6% by Inheriting the Advantages of Binary Cells

Fullerene as an additive for increasing the efficiency of organic solar cells to more than 17%

High-efficiency Ternary Nonfullerene Polymer Solar Cells with Increased Phase Purity and Reduced Nonradiative Energy Loss

Using fullerene as the third component to boosting the photovoltaic performances of pyran acceptor

High-Performance Ternary Nonfullerene Polymer Solar Cells with Both Improved Photon Harvesting and Device Stability.

Achieving Efficient Ternary Organic Solar Cells Using Structurally Similar Non‐Fullerene Acceptors with Varying Flanking Side Chains

Ternary Polymer Solar Cells Achieving 11.78% Efficiency with Two Fluorinated Non-Fullerene Acceptors

A Well‐Mixed Phase Formed by Two Compatible Non‐Fullerene Acceptors Enables Ternary Organic Solar Cells with Efficiency over 18.6%