Chlorinated polymer solar cells simultaneously enhanced by fullerene and non-fullerene ternary strategies

Longzhu Liu,Pengjie Chao,Daize Mo,Feng He
DOI: https://doi.org/10.1016/j.jechem.2020.06.014
IF: 13.1
2021-03-01
Journal of Energy Chemistry
Abstract:<p>To achieve efficient polymer solar cells (PSCs) with full utilization of the whole spectrum, the multi-component devices are of great importance to be deeply explored, especially for their capability of one-step fabrication. However, the research about one same binary system simultaneously derivated various multi-component PSC is still very limited. Herein, we achieved the whole constructions from one binary host to different ternary systems and even the quaternary one. The ternary strategies with fullerene acceptor, PC<sub>71</sub>BM, and non-fullerene acceptor, BT<sub>6</sub>IC-BO-4Cl, as the third component, both boosted the device efficiencies of PBT4Cl-Bz: IT-4F binary system from about 9% to comparatively beyond 11%. Despite the comparable improvement of performance, there existed other similarities and differences in two ternary strategies. In detail, the isotropic carrier transport of PC<sub>71</sub>BM which largely elevated the fill factor (FF) in the corresponding devices, while the strong absorption of BT<sub>6</sub>IC-BO-4Cl enhanced the short current density (<em>J</em><sub>sc</sub>) most. More interestingly, quaternary devices based on PBT4Cl-Bz: IT-4F: PC<sub>71</sub>BM: BT<sub>6</sub>IC-BO-4Cl could combine both advantages of fullerene and non-fullerene ternary strategies, further pumped the <em>J</em><sub>sc</sub> from 16.44 to the highest level of 19.66 mA cm<sup>−2</sup> among all devices, eventually resulted in an optimized efficiency of 11.69%. It reveals that both fullerene and non-fullerene ternary strategies have their unique feature to elevate the device performance either by efficient isotropic carrier transport or better coverage of whole sunlight spectrum and easy tunable energy levels from organic materials. The key is how to integrate the two pathways in one system and provide a more competitive solution facing high-quality PSCs.</p>
chemistry, physical,engineering, chemical, applied,energy & fuels
What problem does this paper attempt to address?
The paper primarily explores how to enhance the performance of chlorinated polymer solar cells (PSCs) through two different ternary strategies involving fullerene and non-fullerene components. Specifically, the researchers introduced fullerene acceptor PC71BM and non-fullerene acceptor BT6IC-BO-4Cl as the third components into a binary system based on chlorinated polymer PBT4Cl-Bz as the donor and IT-4F as the acceptor, constructing two ternary systems. Both strategies effectively improved the power conversion efficiency (PCE) of the solar cells, increasing it from 9.08% in the original binary system to approximately 11%. - The fullerene additive PC71BM mainly enhanced the fill factor (FF), increasing it from 58.87% to 66.95%, while the short-circuit current density (Jsc) also saw a certain increase, from 16.44 mA/cm² to 17.79 mA/cm². - The non-fullerene additive BT6IC-BO-4Cl significantly improved the Jsc, from 16.44 mA/cm² to 18.88 mA/cm², primarily due to its strong absorption capability in the near-infrared region. Additionally, the study explored the simultaneous use of these two additives in a quaternary system. The results indicated that this combination could further optimize performance parameters, achieving the highest Jsc of 19.66 mA/cm² and ultimately realizing an optimal efficiency of 11.69%. In conclusion, the study reveals the unique mechanisms of fullerene and non-fullerene additives in multi-component solar cells and provides valuable insights for constructing high-efficiency, full-spectrum coverage multi-component solar cells.