Abstract:Electrochemical capacitors using neutral aqueous electrolytes are safer and cheaper and allow diverse current collectors compared with the counterparts using organic or acidic/alkaline electrolytes. Two-dimensional (2D) MXenes have been demonstrated as the high-capacitive materials with high rate performance. However, MXene electrodes often exhibit a limited capacitance in neutral electrolytes, where the reversible electrochemical reactions rely greatly on the structural and surface properties of MXenes depending on their synthesis methods. Herein, a simple and highly efficient strategy, which combines HF etching of Ti3AlC2 powder and subsequent amine-assisted delamination at a low temperature, is developed to synthesize 2D Ti3C2Tx MXenes. The comprehensive results demonstrate that the enlarged interlayer spacing and the presence of more −O-containing functional groups synergistically contribute to the improvement of capacitive performance in neutral electrolytes. The 2D Ti3C2Tx MXenes show excellent electrochemical performance in various neutral electrolytes, and a high specific gravimetric capacitance of 149.8 F/g is achieved in 1.0 M Li2SO4. Furthermore, the flexible solid-state supercapacitors (SCs) with a neutral PVA/LiCl gel electrolyte possess a superior areal capacitance (163.1 mF/cm2) and high energy density (17.6 μWh/cm2 at 0.07 mW/cm2), together with high user safety. This work provides a promising guideline of synthesis strategy for high-capacitive MXenes used in neutral electrolytes, which may promote the development of safe and flexible power sources with a high energy density.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c06161.Fractions extracted from Ti 2p and O 1s XPS spectra for Ti3C2Tx-TMAOH and Ti3C2Tx-HF samples; SEM images of raw Ti3AlC2 crystals and multilayered Ti3C2Tx after diluted HF etching of Ti3AlC2 for 2 h; digital photographs showing Tyndall scattering effects of Ti3C2Tx-TMAOH nanosheets dispersed in NMP; SEM image of the Ti3C2Tx-HF sample; AFM image of Ti3C2Tx-TMAOH nanosheets; XPS Al 2p and F 1s spectra of Ti3AlC2, Ti3C2Tx-HF, and Ti3C2Tx-TMAOH; XPS C 1s spectra of Ti3C2Tx-HF and Ti3C2Tx-TMAOH and their component peak fitting; CV curves of Ti3C2Tx-HF and Ti3C2Tx-TMAOH samples at scan rates from 0.5 to 100 mV/s in 1.0 M Na2SO4, 0.65 M K2SO4, and 1.0 M MgSO4; GCD curves of Ti3C2Tx-HF and Ti3C2Tx-TMAOH samples at current densities from 0.5 to 50 A/g in 1.0 M Na2SO4, 0.65 M K2SO4, and 1.0 M MgSO4; electrochemical performance of the freestanding Ti3C2Tx-TMAOH film electrode including CV curves, specific capacitance vs scan rate, GCD curves, and EIS spectra in 1.0 M Na2SO4, 0.65 M K2SO4, and 1.0 M MgSO4 (PDF)This article has not yet been cited by other publications.

High-Capacitance Ti3c2tx Mxene Obtained By Etching Submicron Ti3alc2 Grains Grown In Molten Salt

MXene-transition Metal Sulfide Composite Electrodes for Supercapacitors: Synthesis and Electrochemical Characterization

Electrochemical characterization of Ti3C2T MXene prepared via a molten salt etching route in an acetonitrile-based electrolyte

High-Capacitance Mechanism for Ti3C2Tx MXene by in Situ Electrochemical Raman Spectroscopy Investigation.

A new Ti2V0.9Cr0.1C2Tx MXene with ultrahigh gravimetric capacitance

Amine-Assisted Delaminated 2D Ti 3 C 2 T x MXenes for High Specific Capacitance in Neutral Aqueous Electrolytes

High Gravimetric Capacitance MXene Supercapacitor Electrode Based on Etched Ti3C2Tx by Chemical Etching

High supercapacitance performance of nitrogen-doped Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> prepared by molten salt thermal treatment

Intensifying Electrochemical Activity of Ti3C2Tx MXene via Customized Interlayer Structure and Surface Chemistry

Achieving Quick Charge/discharge Rate of 3.0 V S−1 by 2D Titanium Carbide (mxene) Via N-doped Carbon Intercalation

In Situ Synthesis of MXene with Tunable Morphology by Electrochemical Etching of MAX Phase Prepared in Molten Salt

High supercapacitance performance of nitrogen-doped Ti3C2T prepared by molten salt thermal treatment

The fabrication of Ti3C2 and Ti3CN MXenes by electrochemical etching

High capacitance of MXene (Ti3C2T ) through Intercalation and Surface Modification in Molten Salt

Molten salt-shielded synthesis of Ti3AlC2 as a precursor for large-scale preparation of Ti3C2Tx MXene binder-free films electrode supercapacitors

Retraction of "Surface Functional Groups and Interlayer Water Determine the Electrochemical Capacitance of Ti3C2Tx MXene".

A Facile Etching Route for Preparing Ti 3 C 2 MXene with Enhanced Electrochemical Performance in Silver Nitrate Solution

MXene‐Copper/Cobalt Hybrids Via Lewis Acidic Molten Salts Etching for High Performance Symmetric Supercapacitors

Tailoring Interlayer Structure and Surface Chemical State Intensifies Redox Reaction Activity of Ti3c2tx Mxene

Ultrafast Synthesis of MXenes in Minutes via Low‐Temperature Molten Salt Etching

Simplified Synthesis of Fluoride-Free Ti 3 C 2 T x via Electrochemical Etching toward High-Performance Electrochemical Capacitors