Abstract:To achieve greater hydrophilicity and improved antifouling ability, an ultrafiltration (UF) membrane was modified using a surface coating of raw and functionalized multi-walled carbon nanotubes (MWCNTs). Initially, raw MWCNTs were chemically treated to prepare MWCNTs with carboxylic groups (MWCNTs-COOH) and MWCNTs with polyethylene glycol groups (MWCNTs-PEG), and their physicochemical properties were systematically characterized. The results indicated that the MWCNTs-COOH exhibited the strongest negative charge among the three investigated MWCNTs, whereas the MWCNTs-PEG exhibited the best dispersion ability. Subsequently, the UF membranes were coated with the three MWCNTs, and the surface morphologies and permeability of the modified membranes under different transmembrane pressure (TMP) levels were compared. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) images demonstrated that the modified membranes had a rougher surface than the virgin membrane because of the modification layer of MWCNTs. The pure water flux values of all the modified membranes were slightly reduced in comparison with that of the virgin membrane, but the flux sacrifice was very minor. Three natural organic matter (NOM) models, humic acid (HA), bovine serum albumin (BSA) and sodium alginate (SA), were employed to investigate the antifouling potentials of the membranes. The modified membranes exhibited strikingly improved antifouling properties compared with those of virgin membrane for all of the tested NOM foulants, which was probably a consequence of the decreased direct membrane–foulant contact due to the MWCNT coating layer. In addition, decreased surface negative charge and increased surface roughness were two important factors contributing to the enhanced antifouling properties. The r-membranes and the COOH-membrane exhibited satisfactory stabilities during pure-water backwashing at TMP of 60kPa, with dislodged ratios of 1.9% and 4.54%.

[Effect of PVDF Hollow Fiber Ultrafiltration Membranes Modification with Carbonnanotube on Membrane Fouling Control During Ultrafiltration of Sewage Effluent].

Improving the Performance of Polyamide Reverse Osmosis Membrane by Incorporation of Modified Multi-Walled Carbon Nanotubes

Anti-fouling Characteristic of Carbon Nanotubes Hollow Fiber Membranes by Filtering Natural Organic Pollutants

Improved antifouling and antimicrobial efficiency of ultrafiltration membranes with functional carbon nanotubes

Modification of regenerated cellulose ultrafiltration membranes with multi-walled carbon nanotubes for enhanced antifouling ability: Field test and mechanism study

Novel PVDF hollow fiber ultrafiltration membranes with antibacterial and antifouling properties by embedding N-halamine functionalized multi-walled carbon nanotubes (MWNTs)

The preparation of a modified PVDF hollow fiber membrane by coating with multiwalled carbon nanotubes for high antifouling performance

In-situ modification of PVDF membrane during phase-inversion process using carbon nanosphere sol as coagulation bath for enhancing anti-fouling ability

The preparation of electrically-enhanced and hydrophilic CNTs-PVDF composite hollow fiber membranes for fouling resistance

Surface modification of UF membranes with functionalized MWCNTs to control membrane fouling by NOM fractions

Improving ultrafiltration membrane performance with pre-deposited carbon nanotubes/nanofibers layers for drinking water treatment

Study on the improvement of PVDF flat ultrafiltration membrane with MWCNTs-OH as the additive and the influence of different MWCNTs-OH scales

Robust and Highly Efficient Free‐Standing Carbonaceous Nanofiber Membranes for Water Purification

Fouling Control Mechanisms in Filtrating Natural Organic Matters by Electro-Enhanced Carbon Nanotubes Hollow Fiber Membranes

The Antifouling Performance of an Ultrafiltration Membrane with Pre-Deposited Carbon Nanofiber Layers for Water Treatment

Constructing all carbon nanotube hollow fiber membranes with improved performance in separation and antifouling for water treatment.

Preparation and Properties of Polyvinyl Chloride Ultrafiltration Membranes Blended with Functionalized Multi‐walled Carbon Nanotubes and MWCNTs/Fe3O4 Hybrids

Enhanced Permeability, Contaminants Removal and Antifouling Ability of CNTs-based Hollow Fiber Membranes under Electrochemical Assistance

Preparation of Single-Walled Carbon Nanotubes/polyvinylchloride Membrane and Its Antibacterial Property.

Surface Modification of Pvdf Membrane by Cnc/Cu-Mof-74 for Enhancing Antifouling Property

The Fabrication of High Performance PVDF Hollow Fiber Ultrafiltration Membranes Modified by MWCNTs-OH