Abstract:A New Approach to Synthesis Micrometer-sized Porous Silicon Anode for Lithium Ion batteries Haiping Jia, Xiaolin Li, and Ji-Guang Zhang Pacific Northwest National Laboratory, Richland, WA, United States. With the increasing demand on high energy Li-ion batteries (LIBs) for electric vehicles and other large scale energy storage applications, silicon (Si) based composite material has been regarded as one of the most promising candidate to replace the state-of-the-art graphite anodes and can further boost the specific energy of LIBs to be more than 300 Wh/kg. Silicon has the highest practical capacity of 3,579 mAh g-1 and a relatively low lithiation potential of 0.2 V vs. Li/Li+. However, fast capacity fade still largely limits the practical application of Si based anode. A large volume change during lithiation and delithiation processes lead to pulverization and subsequent loss of electrical contact, continuous consumption of electrolyte, repeated breaking/formation of the solid electrolyte interphase (SEI) and an increase in the overall resistance. There has been significant effort to understand and mitigate the capacity fade in Si-based anodes exploiting nanostructured electrodes, surface coatings, additives and novel binders. These advances have paved the way for practical application of Si-based anodes for Li-ion battery applications. Although significant progress has been made, most nanostructured Si materials have to be prepared by high-cost processes (such as chemical vapor deposition) that are difficult to scale up. Therefore, there is an increasing need to prepare Si microparticles (SiMP) with high conductivity and stable structures. In this work, we developed a low-cost and scalable synthesis processes to make desired micronmeter scale SiO2/MWNT spheres. The highly spherical SiO2/MWNT macrobeads ranging from 500 nm to 10 µm in diameter were employed as template and silicon precursor (Figure 1a, b). The as-prepared material basically retains the original morphology of template and demonstrates unique hierarchical structure (Figure 1c, d). The fine primary silicon particles can shorten the Li+ transport route, and avoid the pulverization of SiMP. The obtained silicon composite delivers a reversible capacity of 1290 mAh g-1 at 1C and 87% capacity can be retained after 300 cycles. We attribute this promising cycling stability to the well-designed hierarchical structure, which provides: 1) enough void space to accommodate the volume change so that the swelling of the composite can be minimized; 2) good mechanical structure and electronic conductivity from the MWNT matrix. More details on the synthesis process and electrochemical performance of SiMP will be reported in this report. Figure 1. (a, b) SEM images of microsphere SiO2/MWNT; (c, d) SEM images of the obtained Si/MWNT. Figure 1

A Reaction-ball-milling-driven Surface Coating Strategy to Suppress Pulverization of Microparticle Si Anodes.

Lithiation of SiO2 in Li-ion Batteries: in Situ Transmission Electron Microscopy Experiments and Theoretical Studies.

Nonfilling carbon coating of porous silicon micrometer-sized particles for high-performance lithium battery anodes.

Surficial Structure Regulation of SiOx Material by High-Energy Ball Milling and Wet-Alkali Chemical Reaction for Lithium-Ion Batteries

An Al2O3 Coating Layer on Mesoporous Si Nanospheres for Stable Solid Electrolyte Interphase and High-Rate Capacity for Lithium Ion Batteries.

Adding Metal Carbides to Suppress the Crystalline Li15Si4 Formation: A Route Toward Cycling Durable Si-Based Anodes for Lithium-Ion Batteries.

Surface Modification of Micro-Silicon Anode for High-performance Lithium-Ion Batteries

Preparation and electrochemical performance of ball milling SiOx/(Cu,Ni) anode materials for lithium–silicon batteries

Dispersion-strengthened microparticle silicon composite with high anti-pulverization capability for Li-ion batteries

Prelithiated Surface Oxide Layer Enabled High-Performance Si Anode for Lithium Storage.

Sequencing-Dependent Impact of Carbon Coating on Microstructure Evolution and Electrochemical Performance of Pre-lithiated SiO Anodes: Enhanced Efficiency and Stability via Pre-Coating Strategy

Dual-Phase SiC + C Coated Microsize Si@SiO x Powder as Anode Material for Li-Ion Batteries

Controlling Surface Oxides in Si/C Nanocomposite Anodes for High‐Performance Li‐Ion Batteries

Engineering Nano-Sized Silicon Anodes with Conductive Networks Toward a High Average Coulombic Efficiency of 90.2% Via Plasma-Assisted Milling

Covalent Coating of Micro‐Sized Silicon With Dynamically Bonded Graphene Layers Toward Stably Cycled Lithium Storage

A New Approach to Synthesis Micrometer-Sized Porous Silicon Anode for Lithium Ion Batteries

Stable Li storage in micron-sized SiO particles with rigid-flexible coating

Microstructural Characteristics and Electrochemical Performance of Core-Shell-Structured Si Powders Fabricated by Ball Milling with Different Process Control Agents

Self‐Adapting Electrochemical Grinding Strategy for Stable Silicon Anode

Remarkably Improved Cycling Stability Of Boron-Strengthened Multicomponent Layer Protected Micron-Si Composite Anode

Impact of Surface Chemistry of Silicon Nanoparticles on the Structural and Electrochemical Properties of Si/Ni3.4Sn4 Com-posite Anode for Li-Ion Batteries