Abstract:Optimization of MgO adsorbents is predominantly focused on the regulation of appropriate adsorption sites for CO2 associated with Mg2+-O2– sites of low coordination. Here, for the first time, we conducted transient kinetic experiments to identify and characterize changes of the CO2 molecular path in MgO-based CO2 adsorbents upon the addition of molten salt modifiers. Among the optimized samples, addition of 10 mol % NaNO2 on the surface of MgO exhibited the highest CO2 uptake (15.7 mmol g–1) at 350 °C compared to less than 0.1 mmol g–1 for the unpromoted MgO. Kinetic modeling showed that the interaction of molten salt-promoted MgO with CO2 at 300 °C involves three different processes, namely, fast surface adsorption associated with surface-active basic sites, chemical reaction associated with MgCO3 formation, and a slow diffusion step being the rate-limiting step of the carbonation process. Furthermore, transient kinetic studies coupled with mass spectrometry under low CO2 partial pressure agreed well with the kinetic simulation results based on TGA measurements, demonstrating an in-depth understanding of the CO2-capturing performance gained and its considerable significance for future practical designs of precombustion CO2 capture.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.est.0c08731?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.est.0c08731</a>.Synthesis and characterization of MgO-based CO2 adsorbents; SSA of NaNO2/ NaNO3-coated MgO adsorbents; CO2 uptakes of molten salt-promoted MgO adsorbents; standard thermodynamic data; kinetic parameters of molten salt-promoted MgO adsorbents; XRD of MgO-based adsorbents; CO2 uptakes over repeated cycles; dynamic variations; and dimensionless transient CO2 adsorption response curves (<a class="ext-link" href="/doi/suppl/10.1021/acs.est.0c08731/suppl_file/es0c08731_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Ultrafast and Stable CO 2 Capture Using Alkali Metal Salt-Promoted MgO-CaCO 3 Sorbents.

Characteristics of MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure

Regenerable MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure: Experimental and DFT Study

Promotion of MgO Sorbents with Eutectic Carbonate Doping for High-Temperature and Pressure CO2 Capture

Properties of a Nano CaO/Al2O3 CO2 Sorbent

MgO promoted by Fe2O3 and nitrate molten salt for fast and enhanced CO2 capture: Experimental and DFT investigation

Efficient MgO-doped CaO sorbent pellets for high temperature CO2 capture

MgO-Based Granular Sorbent Pelletized by Using Ordered Mesoporous Silica as Binder for Low-Temperature CO 2 Capture

MgO-Based Granular Sorbent Pelletized by Using Ordered Mesoporous Silica As Binder for Low-Temperature CO2 Capture

Acquiring an Efficient Warm‐CO2 Sorbent from Advanced Pyrolysis of Magnesium Oxalate

Fabrication Of A New Mgo/C Sorbent For Co2 Capture At Elevated Temperature

Synthesis and Performance of a Nano Synthetic Ca-based Sorbent for High Temperature CO_2 Capture

Wet Mixing Combustion Synthesis of CaO-based Sorbents for High Temperature Cyclic CO2 Capture

Developing a Novel CaO-Based Sorbent for Promoted CO2 Capture and Tar Reduction

Self-Assembled Core-Shell Structure MgO@TiO2 as a K2CO3 Support with Superior Performance for Direct Air Capture CO2

Kilogram-scale production and pelletization of Al-promoted CaO-based sorbent for CO2 capture

SGCS-made Ultrafine CaO/Al2O3 Sorbent for Cyclic CO2 Capture

Molten Salt-Promoted MgO Adsorbents for CO 2 Capture: Transient Kinetic Studies

Mesoporous MgO Promoted with NaNO3/NaNO2 for Rapid and High-Capacity CO2 Capture at Moderate Temperatures

Strengthening performance of Al-stabilized, CaO-based CO 2 sorbent pellets by the combination of impregnated layer solution combustion and graphite-moulding

Hydrophobic interface-assisted casting of Al-supported, CaO-based sorbent pellets for high-temperature CO 2 capture