Abstract:A removal mechanism of chromate (Cr) by synthesized kaolin supported nanoscale zero-valent iron (K-nZVI) from aqueous solution is demonstrated. Parameters which potentially influenced the functioning of K-nZVI have been investigated as well. Based on the scanning electron microscopy, Fourier transform infrared spectroscopes, X-ray crystal powder diffraction and X-ray photoelectron spectroscopy identifications, we confirm that amorphous Fe-0 core/FexOy shell nZVI can be successfully loaded into the pores and cracks, and onto the surface of kaolin. Removal efficiency of Cr by K-nZVI decreased with increasing initial pH and Cr(VI) concentration, but increased while K-nZVI dosage increased. Humic acid and phosphate had similar dual impacts on chromium removal by K-nZVI, and the inhibitory effect was obvious at high concentrations in spite of their different reaction mechanisms. In contrast, high concentrations of sulfate and nitrate could advance the chromium removal. Adsorption isotherms indicate that the removal processes are endothermic. The data obtained can be better explained with Langmuir than Freundlich model. At the conditions of 318K and optimized pH 4.0, the maximum adsorption capacity was 33.39mgg(-1) illustrating that K-nZVI was effective for the removal of total Cr. The removal mechanism is proposed to divide into four phases, including: (1) aqueous Cr(VI) ions are captured on the surface of K-nZVI; (2) the captured Cr(VI) are partly reduced to Cr(III) accompanied by Fe-0 oxidizing to Fe2+; (3) part of oxidized Fe2+ continues to reduce Cr(VI); and (4) produced Cr(III), Fe2+, and Fe3+ are formed passivation layers on the K-nZVI surface which prevent further removal of chromium and result in redundant Fe-0.

Adsorbing Low Concentrations Of Cr(Vi) Onto Ceo2 Zsm-5 And The Adsorption Kinetics, Isotherms And Thermodynamics

Pyrolysing Wood Into Carbons For Cr(Vi) Adsorption: Performances Compared To Mineral Adsorbents

INTENSIFICATION OF ADSORPTION PROCESS BY USING THE PYROLYTIC CHAR FROM WASTE TIRES TO REMOVE CHROMIUM(VI) FROM WASTEWATER

Study of the Properties and Mechanism of Deep Reduction and Efficient Adsorption of Cr(VI) by Low-Cost Fe3O4-modified Ceramsite.

Comprehensive study on the removal of chromate from aqueous solution by synthesized kaolin supported nanoscale zero-valent iron

Mesoporous Na+-SiO2 Spheres for Efficient Removal of Cr3+ from Aqueous Solution

Effect of amorphous ordered mesoporous carrier on adsorption and desorption of Hg<SUP>0</SUP> over CeOx-amTiO2

Adsorptive Removal of Cr(VI) from Aqueous Solutions with an Effective Adsorbent: Cross-Linked Chitosan/montmorillonite Nanocomposites in the Presence of Hydroxy-Aluminum Oligomeric Cations.

Enhanced Adsorptivity of Hexavalent Chromium in Aqueous Solutions Using CTS@nZVI Modified Wheat Straw-Derived Porous Carbon

Kinetics and Mechanisms of Cr(VI) Removal by nZVI: Influencing Parameters and Modification

Efficient removal of Cr(VI) by chitosan cross-linked bentonite loaded nano-zero-valent iron composite: Performance and mechanism

Fe doping enhanced Cr(VI) adsorption efficiency of cerium-based adsorbents: Adsorption behaviors and inner removal mechanisms

Preparation, Characterization, Adsorption Kinetics and Thermodynamics of Chitosan Adsorbent Grafted with a Hyperbranched Polymer Designed for Cr(VI) Removal

Removal of Cr(VI) and Ag(I) by grafted magnetic zeolite/chitosan for water purification: Synthesis and adsorption mechanism

Effective adsorption and removal of industrial dye from aqueous solution using mesoporous zinc oxide nanoparticles via metal organic frame work: equilibrium, kinetics and thermodynamic studies

Hydrothermal synthesis of Zr-doped chitosan carbon-shell protected magnetic composites (Zr–Fe 3 O 4 @C) for stable removal of Cr(VI) from water: Enhanced adsorption and pH adaptability

Fibrous mat of chitosan/polyvinyl alcohol/containing cerium(III) for the removal of chromium(VI) from aqueous solution

Efficient Removal of Cr(VI) by TiO2 Based Micro-Nano Reactor via the Synergy of Adsorption and Photocatalysis

Preparation of α-FeOOH loaded chitosan composite and its efficient removal for Cr(VI)

Facile synthesis of ZIF-8 incorporated electrospun PAN/PEI nanofibrous composite membrane for efficient Cr(VI) adsorption from water

Effective removal of Cr(VI) from water by ball milling sulfur-modified micron zero-valent iron：Influencing factors and removal mechanism