Abstract:Due to the pristine interface of the 2D/3D face-tunneling heterostructure with an ultra-sharp doping profile, the 2D/3D tunneling field-effect transistor (TFET) is considered as one of the most promising low-power devices that can simultane-ously obtain low off-state current (IOFF), high on-state current (ION) and steep subthreshold swing (SS). As a key element for the 2D/3D TFET, the intensive exploration of the tunnel diode based on the 2D/3D heterostructure is in urgent need. The transfer technique composed of the exfoliation and the release process is currently the most common approach to fabri-cating the 2D/3D heterostructures. However, the well-established transfer technique of the 2D materials is still unavailable. Only a small part of the irregular films can usually be obtained by mechanical exfoliation, while the choice of the chemical exfoliation may lead to the contamination of the 2D material films by the ions in the chemical etchants. Moreover, the defor-mation of the 2D material in the transfer process due to its soft nature also leads to the nonuniformity of the transferred film, which is one of the main reasons for the presence of the wrinkles and the stacks in the transferred film. Thus, the large-scale fabrication of the high-quality 2D/3D tunnel diodes is limited. In this article, a comprehensive transfer technique that can mend up the shortages mentioned above with the aid of the water and the thermal release tape (TRT) is proposed. Based on the method we proposed, the MoS2/Si tunnel diode is experimentally demonstrated and the transferred monolayer MoS2 film with the relatively high crystal quality is confirmed by atomic force microscopy (AFM), scanning electron microscopy (SEM), and Raman characterizations. Besides, the prominent negative differential resistance (NDR) effect is observed at room temperature, which verifies the relatively high quality of the MoS2/Si heterojunction. The bilayer MoS2/Si tunnel diode is also experimentally fabricated by repeating the transfer process we proposed, followed by the specific analysis of the electrical characteristics. This study shows the advantages of the transfer technique we proposed and indicates the great application foreground of the fabricated 2D/3D heterostructure for ultralow-power tunneling devices.

High Performance Amplifier Element Realization via MoS2/GaTe Heterostructures.

High Performance Amplifier Element Realization Via MoS2/GaTe Heterostructures

A New Device Architecture Based on Two Dimensional Van Der Waals Heterostructures

MoS2/Si Tunnel Diodes Based on Comprehensive Transfer Technique

Preparation and optoelectronic performance of two-dimensional MoSe2/WSe2 lateral and vertical heterostructures

Realization of High Current Gain for Van der Waals MoS2/WSe2/MoS2 Bipolar Junction Transistor

High-Performance Heterojunctions Based On 2d Semiconductors

AC Characteristics of Van Der Waals Bipolar Junction Transistors Using an MoS2/WSe2/MoS2 Heterostructure.

High-Performance Wafer-Scale MoS2 Transistors Toward Practical Application

High-Current Gain Two-Dimensional MoS<sub>2</sub>-Base Hot-Electron Transistors

Multifunctional High-Performance Van Der Waals Heterostructures.

Transistor concepts based on lateral heterostructures of metallic and semiconducting phases of MoS$_2$

High-current Gain Two-dimensional MoS2-base Hot-electron Transistors.

High‐Performance Large‐Scale Vertical 1T'/2H Homojunction CVD‐Grown Polycrystalline MoTe2 Transistors

High Performance Few-Layer MoS2 Transistor Arrays with Wafer Level Homogeneity Integrated by Atomic Layer Deposition

Vertically stacked van der Waals heterostructures for three-dimensional circuitry elements

High‐Performance Large‐Scale Vertical 1T'/2H Homojunction CVD‐Grown Polycrystalline MoTe 2 Transistors

Vertical WS2/SnS2 Van Der Waals Heterostructure for Tunneling Transistors.

Large scale 2D/3D hybrids based on gallium nitride and transition metal dichalcogenides

Independent Band Modulation in 2D Van Der Waals Heterostructures Via a Novel Device Architecture

Gate-Tunable Semiconductor Heterojunctions from 2D/3D van der Waals Interfaces