Abstract:We introduce a new mechanism to pump liquid in microchannels based on the directional growth and displacement of gas bubbles in conjunction with the non-directional and selective removal of the bubbles. A majority of the existing bubble-driven micropumps employs boiling despite the unfavorable scaling of energy consumption for miniaturization because the vapor bubbles can be easily removed by condensation. Other gas generation methods are rarely suitable for micropumping applications because it is difficult to remove the gas bubbles promptly from a pump loop. In order to eradicate this limitation, the rapid removal of insoluble gas bubbles without liquid leakage is achieved with hydrophobic nanopores, allowing the use of virtually any kind of bubbles. In this paper, electrolysis and gas injection are demonstrated as two distinctively different gas sources. The proposed mechanism is first proved by circulating water in a looped microchannel. Using H(2) and O(2) gas bubbles continuously generated by electrolysis, a prototype device with a looped channel shows a volumetric flow rate of 4.5-13.5 nL s(-1) with a direct current (DC) power input of 2-85 mW. A similar device with an open-ended microchannel gives a maximum flow rate of approximately 65 nL s(-1) and a maximum pressure head of approximately 195 Pa with 14 mW input. The electrolytic-bubble-driven micropump operates with a 10-100 times higher power efficiency than its thermal-bubble-driven counterparts and exhibits better controllability. The pumping mechanism is then implemented by injecting nitrogen gas bubbles to demonstrate the flexibility of bubble sources, which would allow one to choose them for specific needs (e.g., energy efficiency, thermal sensitivity, biocompatibility, and adjustable flow rate), making the proposed mechanism attractive for many applications including micro total analysis systems (microTAS) and micro fuel cells.

Carbon dioxide bubble-propelled microengines in carbonated water and beverages.

Leveraging 3D Printing for the Design of High-Performance Venturi Microbubble Generators

Catalytic Microtubular Jet Engines Self-Propelled by Accumulated Gas Bubbles.

Single-Component TiO2 Tubular Microengines with Motion Controlled by Light-Induced Bubbles.

Autonomous Motion of Bubble-Powered Carbonaceous Nanoflask Motors.

Jet Propulsion: Small 14/2009

Nanoparticle‐Shelled Catalytic Bubble Micromotor

Beyond Platinum: Bubble-Propelled Micromotors Based on Ag and MnO2 Catalysts.

Design and fabrication of tubular micro/nanomotors via 3D laser lithography.

Experimental Investigation of CNT-Based Micro Bubble Generation Inside Microchannels

Bubble energy generator

Femtosecond Laser Fabrication of Three-Dimensional Bubble-Propelled Microrotors for Multicomponent Mechanical Transmission

Bubble-Free Propulsion of Ultrasmall Tubular Nanojets Powered by Biocatalytic Reactions.

Experimental investigation of CO2 bubbles behavior in the anode flow fields of Micro Direct Methanol Fuel Cells

Beyond Platinum: Silver-Catalyst Based Bubble-Propelled Tubular Micromotors.

High Performance Bubble Manipulation on Ferrofluid-Infused Laser-Ablated Microstructured Surfaces

High efficiency micro-bubble generator using carbon nanocoils as heater

Micro-Bubble Generation With Micro-Watt Power Using Carbon Nanotubes Heating Elements

Tubular Catalytic Micromotors in Transition from Unidirectional Bubble Sequences to More Complex Bidirectional Motion

Micropumping of liquid by directional growth and selective venting of gas bubbles

Carbon nanotubes as heating elements for micro-bubble generation