Abstract:The Large Field of View Airborne Infrared Scanner is a newly developed multi-spectral instrument that collects images from the near-infrared to long-wave infrared channels. Its data can be used for land surface temperature (LST) retrieval and environmental monitoring. Before data application, quality assessment is an essential procedure for a new instrument. In this paper, based on the data collected by the scanner near the Yellow River in Henan Province, the geometric and radiometric qualities of the images are first evaluated. The absolute geolocation accuracy of the ten bands of the scanner is approximately 5.1 m. The ground sampling distance is found to be varied with the whisk angles of the scanner and the spatial resolution of the images. The band-to-band registration accuracy between band one and the other nine bands is approximately 0.25 m. The length and angle deformations of the ten bands are approximately 0.67% and 0.3°, respectively. The signal-to-noise ratio (SNR) and relative radiometric calibration accuracy of bands 4, 9, and 10 are relatively better than those of the other bands. Secondly, the radiative transfer equation (RTE) method is used to retrieve the LST from the data of the scanner. Measurements of in situ samples are collected to evaluate the retrieved LST. Neglecting the samples with unreasonable retrieved LST, the bias and RMSE between in situ LST measured by CE312 radiometer and retrieved LST are −0.22 K and 0.94 K, and the bias and RMSE are 0.27 K and 1.59 K for the InfReC R500-D thermal imager, respectively. Overall, the images of the Large Field of View Airborne Infrared Scanner yield a relatively satisfactory accuracy for both LST retrieval and geometric and radiometric qualities.

Design of a Near-Infrared Sky Brightness Monitor and Field Measurement at the Ngari Observatory, Tibet

Near infrared sky brightness measurement using an InGaAs detector

Design of a Continuous-Scanning Sky Brightness Monitor in the 2.5- to 5-Μm Band

Design of Near Infrared Sky Brightness Monitor for Measurements in Antarctica

Design of an Extended Area Blackbody for Calibration of Near Infrared Sky Brightness Monitor in the Antarctic

Preliminary results of sky brightness measurements in near-infrared at Lenghu, China

Design of a Sky Brightness Spectrograph with 2.5-5Um Band for Sky Brightness Measurements

Site-testing at Muztagh-ata site I: Ground Meteorology and Sky Brightness

Performance of infrared detectors applied in astronomical telescopes

Performance of the Large Field of View Airborne Infrared Scanner and Its Application Potential in Land Surface Temperature Retrieval

Optical System Design for a Shortwave Infrared Imaging Spectrometer

Design and realization of an long-wave infrared hyperspectral imaging system

Design of a novel low-background spectrometer for infrared sensitive detection

New infrared camera of the Caucasian Mountain Observatory of the SAI MSU: design, main parameters, and first light

Site testing campaign for the Large Optical/infrared Telescope of China: Overview

Sky-brightness Measurements Inj, H, Andks Bands at DOME A with NISBM and Early Results

Optical Design and Test of a Infrared Hyperspectral Imaging System

Preliminary Study on Feasibility of a Specialized Ground Light Source for Improving the VIIRS DNB Low Light Calibration

1-Meter Near-Infrared Solar Telescope

Design and research on calibration method of multi-channel self-calibration infrared radiation thermometer

Optomechanical Design and Application of Solar-Skylight Spectroradiometer