Abstract:Brillouin optical time-domain analysis (BOTDA) using distributed Brillouin amplification (DBA) only requires a milliwatt-level pump to achieve a sensing range beyond 100 km, which provides a powerful tool for temperature/strain sensing. However, similar to the majority of other long-range BOTDAs, the state-of-the-art reports require > 1000 times average, severely restricting the sensing speed. The blind area over tens of kilometers caused by the nonuniform Brillouin response and parasitic amplitude modulation (AM) are crucial factors affecting the signal-to-noise ratio (SNR). Here, a comprehensive performance optimization and substantial enhancement for BOTDA sensors was presented by the direct demodulation of an injection-locked dual-bandwidth probe wave. Injection locking (IL) can completely eliminate the impact of AM noise; dual-bandwidth probe enables self-adaptive pulse loss compensation, thereby intensifying the SNR flatness along the ultralong fiber, and direct probe demodulation can overcome nonlocal effects and allows ∼19.7 dB enhancement of probe input power. Therefore, using only 100 times average, ∼148.3 km sensing, and ∼5 m spatial resolution were achieved with < ∼0.8 MHz standard deviation of Brillouin frequency shift (BFS) over a broad range (∼131.7 km). The reduction in averages was more than 10 times that of the reported majority of long-range BOTDAs. Such performances were achieved without using time-consuming or post-processing techniques, such as optical pulse coding and image denoising. Because this approach is compatible with optical chirp chain technique without frequency sweeping, fast acquisition (0.3 s) was also realized, which has the potential for fast sensing at 3.3 Hz along a ∼150 km fiber.

Botda Using Channel Estimation with Direct-Detection Optical Ofdm Technique

Efficient Demodulation of Brillouin Phase Spectra and Performance Enhancement in BOTDA Incorporating Phase Noise Elimination

Enhanced BOTDA Sensors Based on Brillouin Phase Recovery Using Kramers-Kronig Relation

Time-division Multiplexing-Based BOTDA over 100km Sensing Length

Influence of Optical Simple Pulse Coding on the Brillouin Optical Time Domain Analyzer Based on Bi-Directional Raman Amplification

Towards fast sensing along ultralong BOTDA: flatness enhancement by utilizing injection-locked dual-bandwidth probe wave

150 Km Fast BOTDA Based on the Optical Chirp Chain Probe Wave and Brillouin Loss Scheme.

Performance of long-range loss-mechanism Brillouin optical-fiber time-domain analysis

Ultra-long Dual-Sideband BOTDA with Balanced Detection

Brillouin optical time-domain analysis enhanced by forward stimulated Brillouin scattering: proof-of-concept demonstration

Kilometers-range dark-pulse Brillouin optical time domain analyzer with centimeters spatial resolution

High-performance optical chirp chain BOTDA by using a pattern recognition algorithm and the differential pulse-width pair technique

Experimental Demonstration of Channel Estimation Using Image Processing in Optical Direct-Detection Ofdm

Extending the Sensing Range of Brillouin Optical Time-Domain Analysis Combining Frequency-Division Multiplexing and In-Line EDFAs

Bi-Directional Brillouin Optical Time Domain Analyzer System for Long Range Distributed Sensing

Brillouin Optical Time Domain Analysis with Phase-Modulated Probe and Time-of-Flight Servo Loop

Ultrafast Resolution-Enhanced Digital Optical Frequency Comb-Based BOTDA with Pump Pulse Array Coding

Distributed Pound-Drever-Hall Technique for Fast Brillouin Optical Time Domain Analysis

Extending the Sensing Distance of a Single-end Random-access BOTDA for Dynamic Sensing

Brillouin Optical Time Domain Analysis Incorporating with Backward Rayleigh Light Detection.

157km BOTDA with pulse coding and image processing