Abstract:Solid polymer electrolytes (SPEs) are urgently required to achieve practical solid-state lithium metal batteries (LMBs) and lithium-ion batteries (LIBs). Herein, we proposed a mechanism for modulating interfacial conduction and anode interfaces in high-concentration SPEs by LiDFBOP. Optimized electrolyte exhibits superior ionic conductivity and remarkable interface compatibility with salt-rich clusters: (1) polymer-plastic crystal electrolyte (P-PCE, TPU-SN matrix) dissociates ion pairs to facilitate Li+ transport in the electrolyte and regulates Li+ diffusion in the SEI. The crosslinking structure of the matrix compensates for the loss of mechanical strength at high-salt concentrations; (2) dual-anion TFSI– n -DFBOP– m in the Li+ solvation sheath facilitates facile Li+ desolvation and formation of salt-rich clusters and is conducive to the formation of Li conductive segments of TPU-SN matrix; (3) theoretical calculations indicate that the decomposition products of LiDFBOP form SEI with lower binding energy with LiF in the SN system, thereby enhancing the interfacial electrochemical redox kinetics of SPE and creating a solid interface SEI layer rich in LiF. As a result, the optimized electrolyte exhibits an excellent ionic conductivity of 9.31 × 10−4 S cm−1 at 30 °C and a broadened electrochemical stability up to 4.73 V. The designed electrolyte effectively prevents the formation of Li dendrites in Li symmetric cells for over 6500 h at 0.1 mA cm−2. The specific Li-Si alloy-solid state half-cell capacity shows 711.6 mAh g−1 after 60 cycles at 0.3 A g−1. Excellent rate performance and cycling stability are achieved for these solid-state batteries with Li-Si alloy anodes and NCM 811 cathodes. NCM 811|| Prelithiated silicon-based anode solid-state cell delivers a discharge capacity of 195.55 mAh g−1 and a capacity retention of 97.8% after 120 cycles. NCM 811||Li solid-state cell also delivers capacity retention of 84.2% after 450 cycles.

Lithium Bis(fluorosulfonyl)imide/Poly(ethylene oxide) Polymer Electrolyte for All Solid-State Li-S Cell.

Lithium Bis(fluorosulfonyl)imide/poly(ethylene Oxide) Polymer Electrolyte

Solid Polymer Electrolyte Comprised of Lithium Salt/ether Functionalized Ammonium-Based Polymeric Ionic Liquid with Bis(fluorosulfonyl)imide

PEO-LITFSI-SiO<sub>2</sub>-SN System Promotes the Application of Polymer Electrolytes in All-Solid-State Lithium-ion Batteries

Solid Electrolyte Based on Waterborne Polyurethane and Poly(ethylene Oxide) Blend Polymer for All-Solid-state Lithium Ion Batteries

Novel Li[(Cf3so2)(N-C4f9so2)N]-Based Polymer Electrolytes for Solid-State Lithium Batteries with Superior Electrochemical Performance

Organic Ionic Plastic Crystal-Poly(ethylene oxide) Solid Polymer Electrolytes: Application in All-Solid-State Lithium Batteries

Solid Polymer Electrolytes Based on the Composite of PEO–LiFSI and Organic Ionic Plastic Crystal

Lithium (fluorosulfonyl)(pentafluoroethylsulfonyl)imide/poly (ethylene Oxide) Polymer Electrolyte: Physical and Electrochemical Properties

High-performance Solid Polymer Electrolytes for Lithium Ion Batteries Based on Sulfobetaine Zwitterion and Poly (ethylene Oxide) Modified Polysiloxane

Single Lithium-Ion Conducting Solid Polymer Electrolyte with Superior Electrochemical Stability and Interfacial Compatibility for Solid-State Lithium Metal Batteries

Fluorinated Bifunctional Solid Polymer Electrolyte Synthesized under Visible Light for Stable Lithium Deposition and Dendrite‐Free All‐Solid‐State Batteries

Synergistic Combination of Ether-Linkage and Polymer-in-Salt for Electrolytes with Facile Li + Conducting and High Stability in Solid-State Lithium Batteries

Poly (ethylene oxide) based solid polymer electrolyte improved by multifunctional additives of poly (acrylamide) and LiI

Lithium Salt Catalyzed Ring-Opening Polymerized Solid-State Electrolyte with Comparable Ionic Conductivity and Better Interface Compatibility for Li-Ion Batteries

An Sodium Bis(trifluoromethanesulfonyl)imide-based Polymer Electrolyte for Solid-State Sodium Batteries

Advanced High-Voltage Electrolyte Design Using Poly(ethylene oxide) and High-Concentration Ionic Liquids for All-Solid-State Lithium Metal Batteries

An All-Solid-State Battery Based on Sulfide and PEO Composite Electrolyte.

Self-assembly Synthesis of Solid Polymer Electrolyte with Carbonate Terminated Poly(ethylene Glycol) Matrix and Its Application for Solid State Lithium Battery

Stable Cycling of Lithium Metal Electrode in Nanocomposite Solid Polymer Electrolytes with Lithium Bis(fluorosulfonyl)imide

Lithiophilic Li-Si alloy-solid electrolyte interface enabled by high-concentration dual salt-reinforced quasi-solid-state electrolyte