Substrate and Band Bending Effects on Monolayer FeSe on SrTiO3(001)

Meiling Xu,Xianqi Song,Hui Wang

DOI: https://doi.org/10.1039/c7cp00173h

2017-01-01

Abstract:The FeSe/Ti2O-type-STO interface model can explain the experimental observation of the electronic band structure and obtained electron count per Fe atom.

What problem does this paper attempt to address?

Ubiquitous Strong Electron–phonon Coupling at the Interface of FeSe/SrTiO3

Chaofan Zhang,Zhongkai Liu,Zhuoyu Chen,Yanwu Xie,Ruihua He,Shujie Tang,Junfeng He,Wei Li,Tao Jia,Slavko N. Rebec,Eric Yue Ma,Hao Yan,Makoto Hashimoto,Donghui Lu,Sung-Kwan Mo,Yasuyuki Hikita,Robert G. Moore,Harold Y. Hwang,Dunghai Lee,Zhixun Shen

DOI: https://doi.org/10.1038/ncomms14468

IF: 16.6

2017-01-01

Nature Communications

Abstract:The observation of replica bands in single-unit-cell FeSe on SrTiO3 (STO)(001) by angle-resolved photoemission spectroscopy (ARPES) has led to the conjecture that the coupling between FeSe electrons and the STO phonons are responsible for the enhancement of Tc over other FeSe-based superconductors. However the recent observation of a similar superconducting gap in single-unit-cell FeSe/STO(110) raised the question of whether a similar mechanism applies. Here we report the ARPES study of the electronic structure of FeSe/STO(110). Similar to the results in FeSe/STO(001), clear replica bands are observed. We also present a comparative study of STO(001) and STO(110) bare surfaces, and observe similar replica bands separated by approximately the same energy, indicating this coupling is a generic feature of the STO surfaces and interfaces. Our findings suggest that the large superconducting gaps observed in FeSe films grown on different STO surface terminations are likely enhanced by a common mechanism.
Antifferomagnetic FeSe Monolayer on SiTiO_3: the Charge Doping and Electric Field Effects

Fawei Zheng,Zhigang Wang,Wei Kang,Ping Zhang

2013-01-01

Abstract:We present theoretically the electronic structure of antiferromagnetic (AFM) FeSe monolayer on TiO_2 terminated SrTiO_3(001) surface. It is revealed that the striking disappearance of the Fermi surface around the Brillouin zone (BZ) center can be well explained by the antiferromatnetic (AFM) phase. We show that the system has a considerable charge transfer from SrTiO_3(001) substrate to FeSe monolayer, and so has a self-constructed electric field. The FeSe monolayer band structure near the BZ center is sensitive to charge doping, and the spin-resolved energy bands at BZ corner are distorted to be flattened by the perpendicular electric field. We propose a tight-binding model Hamiltonian to take these key factors into account. We also show that this composite structure is an ideal electron-hole bilayer system, with electrons and holes respectively formed in FeSe monolayer and TiO_2 surface layer.
Antiferromagnetic Fese Monolayer on Srtio3: the Charge Doping and Electric Field Effects

Fawei Zheng,Zhigang Wang,Wei Kang,Ping Zhang

DOI: https://doi.org/10.1038/srep02213

IF: 4.6

2013-01-01

Scientific Reports

Abstract:By growing monolayer FeSe on SrTiO3(001) surface, researchers obtain the highest superconducting transition-temperature for iron-based superconductor. Here, we study the antiferromagnetic (AFM) checkerboard monolayer FeSe adsorbed on SrTiO3(001) surface. We show that the system has a considerable charge transfer from SrTiO3(001) substrate to FeSe monolayer, and so has a self-constructed electric field. The FeSe monolayer band structure near the Brillouin zone (BZ) center is sensitive to charge doping, and the spin-resolved energy bands at BZ corner are distorted to be flattened by the perpendicular electric field. It is revealed that the striking disappearance of the Fermi surface around the BZ center can be well explained by the AFM checkerboard phase with charge doping and electric field effects. We propose a tight-binding model Hamiltonian to take these key factors into account. We also show that this composite structure is an ideal electron-hole bilayer system, with electrons and holes respectively formed in FeSe monolayer and TiO2 surface layer.
Tuning the band structure and superconductivity in single-layer FeSe by interface engineering

R. Peng,H. C. Xu,S. Y. Tan,H. Y. Cao,M. Xia,X. P. Shen,Z. C. Huang,C.H.P. Wen,Q. Song,T. Zhang,B. P. Xie,X. G. Gong,D. L. Feng

DOI: https://doi.org/10.1038/ncomms6044

IF: 16.6

2014-01-01

Nature Communications

Abstract:The interface between transition metal compounds provides a rich playground for emergent phenomena. Recently, significantly enhanced superconductivity has been reported for single-layer FeSe on Nb-doped SrTiO 3 substrate. Yet it remains mysterious how the interface affects the superconductivity. Here we use in situ angle-resolved photoemission spectroscopy to investigate various FeSe-based heterostructures grown by molecular beam epitaxy, and uncover that electronic correlations and superconducting gap-closing temperature ( T g ) are tuned by interfacial effects. T g up to 75 K is observed in extremely tensile-strained single-layer FeSe on Nb-doped BaTiO 3 , which sets a record high pairing temperature for both Fe-based superconductor and monolayer-thick films, providing a promising prospect on realizing more cost-effective superconducting device. Moreover, our results exclude the direct correlation between superconductivity and tensile strain or the energy of an interfacial phonon mode, and highlight the critical and non-trivial role of FeSe/oxide interface on the high T g , which provides new clues for understanding its origin.
Observation of interface induced high temperature superconductivity in single unit-cell FeSe films on SrTiO3(110)

guanyu zhou,ding zhang,chong liu,chenjia tang,xiaoxiao wang,zheng li,canli song,shuaihua ji,ke he,lili wang,xucun ma,qikun xue

2015-01-01

Abstract:We report high temperature superconductivity in one unit-cell (1-UC) FeSe films grown on STO(110) substrate by molecular beam epitaxy (MBE). By in-situ scanning tunneling spectroscopy measurement, we observed a superconducting gap as large as 17 meV. Transport measurements on 1-UC FeSe/STO(110) capped with FeTe layers reveal superconductivity with an onset TC of 31.6 K and an upper critical magnetic field of 30.2 T. We also find that the TC can be further increased by an external electric field, but the effect is smaller than that on STO(001) substrate. The study points out the important roles of interface related charge transfer and electron-phonon coupling in the high temperature superconductivity of FeSe/STO.
Effect of Substrate on Superconducting and Magnetic Properties for the Epitaxial FeSe0.5Te0.5 Thin Films

Yalin Zhang,Tong Wang,Zhihe Wang,Zhongwen Xing

DOI: https://doi.org/10.1088/1361-6668/abf550

2021-01-01

Superconductor Science and Technology

Abstract:High quality FeSe0.5Te0.5 (FST) epitaxial thin films were successfully prepared on SrTiO3 (STO), MgO and LaAlO3 substrates with a TiO2 buffer layer by pulsed laser deposition method, respectively. We present the results of a collaborative study on the superconducting and magnetic properties of the three types films, such as the critical temperature T c, the anisotropy, and the critical current density J c. A stronger matching between film and substrate plays an important role in enhancing the superconducting and magnetic properties. FST film on STO substrate shows the high superconducting transition temperature T c about 14.6 K and the largest critical current density J c above 106 A cm−2 at 4 K in self-field. In addition, the high-angle annular dark field imaging implies the interface sharpness at FST/TiO2 heterostructure, contributing to a deep understanding of bonding for the iron-based superconductors.
Direct imaging of electron transfer and its influence on superconducting pairing at FeSe/SrTiO3 interface

Weiwei Zhao,Mingda Li,Cui-Zu Chang,Jue Jiang,Lijun Wu,Chaoxing Liu,Yimei Zhu,Jagadeesh S. Moodera,Moses H. W. Chan

DOI: https://doi.org/10.48550/arXiv.1701.03678

2017-01-13

Abstract:The exact mechanism responsible for the tenfold enhancement of superconducting transition temperature (Tc) in a monolayer iron selenide (FeSe) on SrTiO3(STO) substrate over that of bulk FeSe, is an open issue. We present here a coordinated study of electrical transport and low temperature electron energy-loss spectroscopy (EELS) measurements on FeSe/STO films of various thicknesses. Our EELS mapping across the FeSe/STO interface shows direct evidence of band-bending caused by electrons transferred from STO to FeSe layer. The transferred electrons were found to accumulate only within the first two atomic layers of FeSe films near the STO substrate. Our transport results found a positive backgate applied from STO is particularly effective in enhancing Tc of the films while minimally changing the carrier density. We suggest that the positive backgate tends to 'pull' the transferred electrons in FeSe films closer to the interface and thus further enhances both their coupling to interfacial phonons and the electron-electron interaction within FeSe films, thus leading to a huge enhancement of Tc in FeSe films.

Superconductivity,Mesoscale and Nanoscale Physics,Materials Science
Self-consistent temperature dependence of quasiparticle bands in monolayer FeSe on SrTiO$_3$

Fabian Schrodi,Alex Aperis,Peter M. Oppeneer

DOI: https://doi.org/10.1103/PhysRevB.98.094509

2018-09-12

Abstract:We study the temperature evolution of the quasiparticle bands of the FeSe monolayer on the SrTiO$_3$ (STO) substrate from 10 to 300 K by applying the anisotropic, multiband and full-bandwidth Eliashberg theory. To achieve this, we extend this theory by self-consistently coupling the chemical potential to the full set of Eliashberg equations. In this way, the electron filling can accurately be kept at a constant level at any temperature. Solving the coupled equations self-consistently, and with focus on the interfacial electron-phonon coupling, we compute a nearly constant Fermi surface with respect to temperature and predict a non-trivial temperature evolution of the global chemical potential. This evolution includes a total shift of 5 meV when increasing temperature from 10 to 300 K and a hump-like dependence followed by a kink at the critical temperature T$_c$. We argue that the latter behavior indicates that superconductivity in FeSe/SrTiO$_3$ is near to the BCS-BEC crossover regime. Calculating the temperature dependent Angle Resolved Photoemission Spectroscopy (ARPES) spectra, we suggest a new route to determine the energy scale of the interfacial phonon mode by measuring the energy position of second-order replica bands. Further, we re-examine the often used symmetrization procedure applied to such ARPES curves and demonstrate substantial asymmetric deviations. Lastly, our results reveal important aspects for the experimental determination of the momentum anisotropy of the superconducting gap.

Superconductivity
Picoscale structural insight into superconductivity of monolayer FeSe/SrTiO3.

Rui Peng,Ke Zou,M G Han,Stephen D Albright,Hawoong Hong,Claudia Lau,H C Xu,Yimei Zhu,F J Walker,C H Ahn

DOI: https://doi.org/10.1126/sciadv.aay4517

IF: 13.6

2020-01-01

Science Advances

Abstract:Remarkable enhancement of the superconducting transition temperature (T c) has been observed for monolayer (ML) FeSe films grown on SrTiO3 substrates. The atomic-scale structure of the FeSe/SrTiO3 interface is an important determinant of both the magnetic and interfacial electron-phonon interactions and is a key ingredient to understanding its high-T c superconductivity. We resolve the atomic-scale structure of the FeSe/SrTiO3 interface through a complementary analysis of scanning transmission electron microscopy and in situ surface x-ray diffraction. We find that the interface is more strongly bonded for a particular registration, which leads to a coherently strained ML. We also determine structural parameters, such as the distance between ML FeSe and the oxide, Se─Fe─Se bond angles, layer-resolved distances between Fe─Se, and registry of the FeSe lattice relative to the oxide. This picoscale structure determination provides an explicit structural framework and constraint for theoretical approaches addressing the high-T c mechanism in FeSe/SrTiO3.
Effects of interface oxygen vacancies on electronic bands of FeSe/SrTiO3(001)

M. X. Chen,Zhuozhi Ge,Y. Y. Li,D. F. Agterberg,L. Li,M. Weinert

DOI: https://doi.org/10.48550/arXiv.1603.03841

2016-03-12

Materials Science

Abstract:Modifications of the electronic bands of thin FeSe films due to oxygen vacancies in the supporting SrTiO 3 (001) substrate - and the interplay with spin-orbit coupling, magnetism, and epitaxy - are investigated by first-principles supercell calculations. Unfolded (k-projected) bands show that the oxygen vacancies both provide electron doping to the interface FeSe layer and also have notable effects on the details of the bands around the Fermi level, including renormalizing the width of the Fe-3d band near the Fermi level by a factor of about 0.6, and causing a splitting of ~40 meV at the M point for the checkerboard antiferromagnetic configuration. For an FeSe bilayer, the modifications to the bands are mainly limited to the interface FeSe layer. While spin-orbit-coupling induced band splittings of ~30 meV at M for the ideal FeSe/SrTiO3 (001) interfaces are comparable to the splitting due to oxygen vacancies, the effects are not simply additive. Calculations and comparison to our scanning tunneling microscopy images of MBE-grown FeSe films on SrTiO3 (001) suggest that a common defect may be Se bound to an oxygen vacancy at the interface
Picoscale structural insight into superconductivity of monolayer FeSe/SrTiO<sub>3</sub>

Rui Peng,Ke Zou,M. G. Han,Stephen D. Albright,Hawoong Hong,Claudia Lau,H. C. Xu,Yimei Zhu,F. J. Walker,C. H. Ahn

DOI: https://doi.org/10.1126/sciadv.aay4517

IF: 13.6

2020-01-01

Science Advances

Abstract:Remarkable enhancement of the superconducting transition temperature (T-c) has been observed for monolayer (ML) FeSe films grown on SrTiO3 substrates. The atomic-scale structure of the FeSe/SrTiO3 interface is an important determinant of both the magnetic and interfacial electron-phonon interactions and is a key ingredient to understanding its high-T-c superconductivity. We resolve the atomic-scale structure of the FeSe/SrTiO3 interface through a complementary analysis of scanning transmission electron microscopy and in situ surface x-ray diffraction. We find that the interface is more strongly bonded for a particular registration, which leads to a coherently strained ML. We also determine structural parameters, such as the distance between ML FeSe and the oxide, Se-Fe-Se bond angles, layer-resolved distances between Fe-Se, and registry of the FeSe lattice relative to the oxide. This picoscale structure determination provides an explicit structural framework and constraint for theoretical approaches addressing the high-T-c mechanism in FeSe/SrTiO3.
Electron-Phonon Coupling Enhanced by the Fese/Srtio3 Interface

B. Li,Z. W. Xing,G. Q. Huang,D. Y. Xing

DOI: https://doi.org/10.1063/1.4876750

IF: 2.877

2014-01-01

Journal of Applied Physics

Abstract:The electronic structure, phonon dispersions, and electron-phonon (EP) coupling in Fe2Se2/SrTiO3 (FeSe/STO) thinnest films are studied based on the first-principles calculations. It is found that the FeSe/STO interface with lattice strain leads to a change of band structures and a significant enhancement of the EP coupling, the latter being close related to interface-induced ferroelectric phonons coupled to electrons on the FeSe monolayer. In the FeSe/STO system, Tc of phonon-induced superconductivity is estimated to be much greater than that in the bulk FeSe, but still well below the experimental value of an FeSe monolayer on the STO substrate, indicating that the electron-phonon mechanism alone cannot explain its high Tc.
LaO as a candidate substrate for realizing superconductivity in an FeSe epitaxial film

Xiao-Le Qiu,Ben-Chao Gong,Huan-Cheng Yang,Zhong-Yi Lu,Kai Liu

DOI: https://doi.org/10.1103/physrevb.103.035143

IF: 3.7

2021-01-27

Physical Review B

Abstract:The significantly enhanced superconducting transition temperature (Tc) of an FeSe monolayer on SrTiO3(001) substrate has attracted extensive attention in recent years. Here, based on first-principles electronic structure calculations, we propose another candidate substrate, LaO(001), for the epitaxial growth of an FeSe monolayer to realize superconductivity. Our calculations show that for the optimal adsorption structure of the FeSe monolayer on LaO(001), the stripe antiferromagnetic state and the dimer antiferromagnetic state are almost energetically degenerate, indicating the existence of strong magnetic fluctuation that is beneficial to the appearance of superconductivity. According to the Bader charge analysis, the calculated electron doping from the LaO substrate to the FeSe monolayer is about 0.18 electrons per Fe atom, even larger than that in the case of FeSe/SrTiO3(001). Since LaO was also reported to be a superconductor with Tc∼5 K, it may have a superconducting proximity effect on the epitaxial FeSe film and vice versa. These results suggest that LaO would be an interesting substrate to study interface-related superconductivity.

physics, condensed matter, applied,materials science, multidisciplinary
LaO as a candidate substrate for realizing superconductivity in FeSe epitaxial film

Xiao-Le Qiu,Ben-Chao Gong,Huan-Cheng Yang,Zhong-Yi Lu,Kai Liu

DOI: https://doi.org/10.48550/arXiv.2106.12388

2021-06-23

Superconductivity

Abstract:The significantly enhanced superconducting transition temperature ($T_c$) of an FeSe monolayer on SrTiO$_3$(001) substrate has attracted extensive attention in recent years. Here, based on first-principles electronic structure calculations, we propose another candidate substrate LaO(001) for the epitaxial growth of FeSe monolayer to realize superconductivity. Our calculations show that for the optimal adsorption structure of FeSe monolayer on LaO(001), the stripe antiferromagnetic state and the dimer antiferromagnetic state are almost energetically degenerate, indicating the existence of strong magnetic fluctuation that is beneficial to the appearance of superconductivity. According to the Bader charge analysis, the calculated electron doping from the LaO substrate to the FeSe monolayer is about 0.18 electrons per Fe atom, even larger than that in case of FeSe/SrTiO$_3$(001). Since LaO was also reported to be a superconductor with $T_c$ ~ 5 K, it may have a superconducting proximity effect on the epitaxial FeSe film and vice versa. These results suggest that LaO would be an interesting substrate to study the interface-related superconductivity.
Atomic And Electronic Structures Of Single-Layer Fese On Srtio3(001): The Role Of Oxygen Deficiency

Junhyeok Bang,Zhi Li,Yiyang Sun,Amit K. Samanta,YuYang Zhang,Wenhao Zhang,Lili Wang,Xi Chen,Xucun Ma,Qikun Xue,Shengbai Zhang

DOI: https://doi.org/10.1103/PhysRevB.87.220503

IF: 3.7

2013-01-01

Physical Review B

Abstract:Using first-principles calculation, we propose an interface structure for single triple-layer FeSe on the SrTiO3(001) surface, a high-T-c superconductor found recently. The key component of this structure is the oxygen deficiency on the top layer of the SrTiO3 substrate, as a result of Se etching used in preparing the high-T-c samples. The O vacancies strongly bind the FeSe triple layer to the substrate giving rise to a (2 x 1) reconstruction, as observed by scanning tunneling microscopy. The enhanced binding correlates to the significant increase of T-c observed in experiment. The O vacancies also serve as the source of electron doping, which modifies the Fermi surface of the first FeSe layer by filling the hole pocket near the center of the surface Brillouin zone, as suggested from angle-resolved photoemission spectroscopy measurement.
Atomically Resolved FeSe/SrTiO 3 (001) Interface Structure by Scanning Transmission Electron Microscopy

Fangsen Li,Qinghua Zhang,Chenjia Tang,Chong Liu,Jinan Shi,Caina Nie,Guanyu Zhou,Zheng Li,Wenhao Zhang,Can-Li Song,Ke He,Shuaihua Ji,Shengbai Zhang,Lin Gu,Lili Wang,Xu-Cun Ma,Qi-Kun Xue

DOI: https://doi.org/10.1088/2053-1583/3/2/024002

IF: 6.861

2016-01-01

2D Materials

Abstract:Interface-enhanced high-temperature superconductivity in one unit-cell (UC) FeSe films on SrTiO3(001) (STO) substrate has recently attracted much attention in condensed matter physics and material science. By combined in-situ scanning tunneling microscopy/spectroscopy (STM/STS) and ex-situ scanning transmission electron microscopy (STEM) studies, we report on atomically resolved structure including both lattice constants and actual atomic positions of the FeSe/STO interface under both non-superconducting and superconducting states. We observed TiO2 double layers (DLs) and significant atomic displacements in the top two layers of STO, lattice compression of the Se-Fe-Se triple layer, and relative shift between bottom Se and topmost Ti atoms. By imaging the interface structures under various superconducting states, we unveil a close correlation between interface structure and superconductivity. Our atomic-scale identification of FeSe/STO interface structure provides useful information on investigating the pairing mechanism of this interface-enhanced high-temperature superconducting system.
Picoscale Structural Insight into Superconductivity of Monolayer FeSe/SrTiO 3

Rui Peng,Ke Zou,Myung‐Geun Han,Stephen D. Albright,Hawoong Hong,Claudia Lau,Hai-Chao Xu,Yimei Zhu,Frederick J. Walker,Charles Ahn

DOI: https://doi.org/10.1126/sciadv.aay4517

IF: 13.6

2020-01-01

Science Advances

Abstract:Experiments reveal interfacial atomic-scale structure that may be critical for the interface enhanced high T c in FeSe/SrTiO 3 .
Interface Induced High Temperature Superconductivity in Single Unit-Cell Fese on Srtio3(110)

Guanyu Zhou,Ding Zhang,Chong Liu,Chenjia Tang,Xiaoxiao Wang,Zheng Li,Canli Song,Shuaihua Ji,Ke He,Lili Wang,Xucun Ma,Qi-Kun Xue

DOI: https://doi.org/10.1063/1.4950964

IF: 4

2016-01-01

Applied Physics Letters

Abstract:We report high temperature superconductivity in one unit-cell (1-UC) FeSe films grown on STO(110) substrate by molecular beam epitaxy. By in-situ scanning tunneling spectroscopy measurement, we observed a superconducting gap as large as 17 meV. Transport measurements on 1-UC FeSe/STO(110) capped with FeTe layers reveal superconductivity with an onset TC of 31.6 K and an upper critical magnetic field of 30.2 T. We also find that the TC can be further increased by an external electric field, but the effect is smaller than that on STO(001) substrate. The study points out the important roles of interface related charge transfer and electron-phonon coupling in the high temperature superconductivity of FeSe/STO.
Interface enhanced superconductivity in FeSe/SrTiO<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:msub><mml:mrow /> <mml:mn>3</mml:mn> </mml:msub></mml:math> and the hidden nature

Sha Han,Can-Li Song,Xu-Cun Ma,Qi-Kun Xue

DOI: https://doi.org/10.5802/crphys.87

2022-01-01

Abstract:The superconductivity confined in a two-dimensional interface exhibits many exotic phenomena that have certain counterparts in layered cuprates and iron-based superconductors, and thus provides rare opportunities to reveal the mystery of high temperature superconductivity therein. By constructing and tailoring hybrid heterostructures such as FeSe/$\mathrm{SrTiO}_3$ (FeSe/STO), interface-enhanced superconductivity arouses, and the substrate has been demonstrated to provide the phonons and enhance the strong electron–phonon coupling (EPC) within monolayer FeSe. More research and reporting systems uncover that the band-bending induced charge transfer at the interface could become a unified microscopic picture to design the new interface superconductors. With re-examination of the experimental research in $\mathrm{LaAlO}_3$/STO (LAO/STO) and unconventional superconductors, the common characteristics such as band bending and rigid band shift are perceived in the FeSe/STO, LAO/STO and cuprate superconductors. This review may provide important information to inspect the mechanism of high-$T_c$ superconductivity from a different view.
Impacts of Substrate Conditions and Post-Annealing on Monolayer Iron-Based Superconductors

Guanyang He,Yu Li,Yuxuan Lei,Xingyue Wang,Minghu Pan,Jian Wang

DOI: https://doi.org/10.1103/physrevmaterials.8.014802

IF: 3.98

2024-01-01

Physical Review Materials

Abstract:High-temperature superconductivity in monolayer FeSe/Fe(Te, Se) grown on $\mathrm{SrTi}{\mathrm{O}}_{3}$ (STO) substrates is closely related to the interface effects from STO. Using in situ low-temperature scanning tunneling microscopy/spectroscopy, we study the surface flatness and reconstructions of STO from different pre-treatment methods, and the influence of STO reconstructions on the interfacial superconductivity. Besides, the impacts from postgrowth annealing conditions on the morphology and superconducting properties of monolayer FeSe/Fe(Te, Se) are investigated. These results pave the way for the growth of high-temperature interface superconductors in a detailed level, and provide useful references for better interfacial engineering to foster superconductivity.

Substrate and Band Bending Effects on Monolayer FeSe on SrTiO3(001)

Ubiquitous Strong Electron–phonon Coupling at the Interface of FeSe/SrTiO3

Antifferomagnetic FeSe Monolayer on SiTiO_3: the Charge Doping and Electric Field Effects

Antiferromagnetic Fese Monolayer on Srtio3: the Charge Doping and Electric Field Effects

Tuning the band structure and superconductivity in single-layer FeSe by interface engineering

Observation of interface induced high temperature superconductivity in single unit-cell FeSe films on SrTiO3(110)

Effect of Substrate on Superconducting and Magnetic Properties for the Epitaxial FeSe0.5Te0.5 Thin Films

Direct imaging of electron transfer and its influence on superconducting pairing at FeSe/SrTiO3 interface

Self-consistent temperature dependence of quasiparticle bands in monolayer FeSe on SrTiO$_3$

Picoscale structural insight into superconductivity of monolayer FeSe/SrTiO3.

Effects of interface oxygen vacancies on electronic bands of FeSe/SrTiO3(001)

Picoscale structural insight into superconductivity of monolayer FeSe/SrTiO<sub>3</sub>

Electron-Phonon Coupling Enhanced by the Fese/Srtio3 Interface

LaO as a candidate substrate for realizing superconductivity in an FeSe epitaxial film

LaO as a candidate substrate for realizing superconductivity in FeSe epitaxial film

Atomic And Electronic Structures Of Single-Layer Fese On Srtio3(001): The Role Of Oxygen Deficiency

Atomically Resolved FeSe/SrTiO 3 (001) Interface Structure by Scanning Transmission Electron Microscopy

Picoscale Structural Insight into Superconductivity of Monolayer FeSe/SrTiO 3

Interface Induced High Temperature Superconductivity in Single Unit-Cell Fese on Srtio3(110)

Interface enhanced superconductivity in FeSe/SrTiO<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:msub><mml:mrow /> <mml:mn>3</mml:mn> </mml:msub></mml:math> and the hidden nature

Impacts of Substrate Conditions and Post-Annealing on Monolayer Iron-Based Superconductors