Abstract:Nanofiber catalysts are potentially promising to be equipped in the lean-burned vehicle exhaust emission system considering its facile synthesis, low-cost, long durability in contrast to the traditionally complicated powder based catalyst. Here, via electrospinning method, we synthesized YMn2O5 nanofibers (average diameter (similar to)93 nm) including nanowire stacked with particles, and hollow tubes with or without inside nanowires. The morphologies remained even after hydrothermal aging at 800 degrees C for 10 h with 10% H2O stream. X-ray photoelectron spectrum revealed Mn4+/Mn3+ ratio 0.589 on the surface of YMn2O5 catalyst (YMO), indicating the existence of oxygen vacancies. The highest conversion of electrospun mullite fibers at 310 degrees C is (similar to)18% higher than powder based YMO at 352 degrees C in the presence of 5% H2O at WHSV = 240,000 ml g(-1) h(-1). The extracted activation energy from NO-to-NO2 conversion curves of YMO nanofiber (61.68 kJ/mol) is slightly lower than that of powder-based mullite (91.45 kJ/mol), consistent with calculated 68.16 kJ/mol on the fiber YMO surface (121) with a rate-limiting step of the NO2 desorption. The catalytic activity can be attributed to the unit occupy of the e(g) (d(z)(2) and d(x-y)(2 2)) orbitals of Mn-dimer atoms around fermi level based on the combination of the theoretical calculations and DRIFTS spectra analysis. Importantly, after the hash hydrothermal-aging, the highest NO oxidation conversion of powder-based mullite is less than 50%, while the fiber maintains a conversion of 62%. Moreover, the fresh YMO fiber maintained superior oxidation stability for 12 h at its maximum conversion of 66%. This work provides the possibility for mullite oxide fibers to replace powder-based precious metal catalyst coating on monolith converter.

Facile Fabrication of Hollow Tubular Mixed Oxides for Selective Catalytic Reduction of NOx at Low Temperature: a Combined Experimental and Theoretical Study

Activation of Fast Selective Catalytic Reduction of NO by NH3 at Low Temperature over TiO2 Modified CuOX-CeOX Composites

Rational Amelioration of Redox Equilibrium by Constructing Hollow Nanotube Co-Mn/TiO2 Catalyst to Boost Simultaneous Removal of NO and Hg0

Facile Synthesis of Mn-Fe/CeO2 Nanotubes by Gradient Electrospinning and Their Excellent Catalytic Performance for Propane and Methane Oxidation.

Facile synthesis of Schistose-like Co-Mn oxides for low-temperature catalytic oxidation of NO with enhanced SO 2 /H 2 O tolerance

Controlled Preparation of Cross-Linked SnO 2 Hollow Nanotube Networks for Electrocatalytic CO 2 Reduction

Low-Temperature Reduction of NOx by NH3 with Unity Conversion on Nanofilament MnO2/Activated Semi-Coke Catalyst

Structure–Activity Relationships of AMn2O4 (A = Cu and Co) Spinels in Selective Catalytic Reduction of NOx: Experimental and Theoretical Study

Controlled Preparation of Cross-Linked SnO2 Hollow Nanotube Networks for Electrocatalytic CO2 Reduction

In situ synthesis of low-valence MnO/Mn 3 O 4 catalyst via carbon-acid hydrothermal strategy for NO removal

Fabrication of High-performance CeO2-MnOx/TiO2/Ti Monolithic Catalysts for Low-temperature and Stable CO Oxidation

MnOx Fabrication with Rational Design of Morphology for Enhanced Activity in NO Oxidation and SO2 Resistance

In-situ fabrication of Cu-Mn-O nanostructure catalysts on Ti mesh and their catalytic property optimization for low-temperature and stable CO oxidation

Electrospun YMn2O5 Nanofibers: A Highly Catalytic Activity for NO Oxidation

Peanut-Shaped Cu–Mn Nano-Hollow Spinel with Oxygen Vacancies as Catalysts for Low-Temperature NO Reduction by CO

Hollow Mn-doped CeO2@Co3O4 catalyst for NO reduction by CO

Cobalt doped Fe-Mn@CNTs catalysts with highly stability for low-temperature selective catalytic reduction of NOx

Freestanding Cobalt‐Aluminum Oxides on USY Zeolite As an Efficient Catalyst for Selective Catalytic Reduction of NOx

Constructing hollow silkworm structure in MnOx–TiO2 catalysts for improving the performance in selective catalytic reduction of NO by NH3

Design of robust Co-doped Mn3O4 spinel catalysts for selective catalytic reduction of NO with NH3 at low temperatures

Exposed Metal Oxide Active Sites on Mesoporous Titania Channels: a Promising Design for Low-Temperature Selective Catalytic Reduction of NO with NH3