Abstract:we report on the recent progress on high power pulsed 2.8 mu m Er3+-doped ZBLAN fiber laser through techniques of passively and actively Q-switching in our research group. In passively Q-switched operation, a diode-cladding-pumped mid-infrared passively Q-switched Er3+-doped ZBLAN fiber laser with an average output power of watt-level based on a semiconductor saturable absorber mirror (SESAM) was demonstrated. Stable pulse train was produced at a slope efficient of 17.8% with respect to launched pump power. The maximum average power of 1.01 W at a repetition rate of 146.3 kHz was achieved with a corresponding pulse energy of 6.9 mu J. The maximum peak power was calculated to be 21.9 W. In actively Q-switched operation, a diode-pumped actively Q-switched Er3+-doped ZBLAN fiber laser at 2.8 mu m with an optical chopper was reported. The maximum laser pulse energy of up to 130 mu J and a pulse width of 127.3 ns at a repetition rate of 10 kHz with an operating wavelength of 2.78 mu m was obtained, yielding the maximum peak power of exceeding 1.1 kW.

High average power and energy microsecond pulse generation from an erbium-doped fluoride fiber MOPA system.

High pulse energy, narrow-linewidth all-fiber 1064 nm picosecond master oscillator power amplifier system

All-fiber 3.4-W 2.8-µm ultra-short pulse MOPA system seeded by the soliton self-frequency shift of 2-µm pulses

High-pulse-energy Passively Q-switched Sub-Nanosecond MOPA Laser System Operating at Khz Level

High-energy single-frequency pulsed fiber MOPA at 1064 nm based on a hybrid active-fiber

Ultra Compact Kilohertz-Linewidth High-Power Single-Frequency Laser Based on Er3+/Yb3+-Codoped Phosphate Fiber Amplifier

Generation of high-power 780 nm femtosecond pulses by an all-polarization-maintaining Er-doped fiber amplification system

All-Fiber Millijoule Energy and Nanoseconds Pulse Operation of A High Beam Quality Multi-Stage Pulse-Pumped Yb-Doped Amplifier Cascade

5 Khz, 4.2mj, 900 Ps End-Pumped Nd:YVO4 MOPA Laser System

High-Power Highly Linear-Polarized Nanosecond All-Fiber Mopa at 2040 Nm

Experimental Investigation of High Power Pulsed 2.8 Μm Er3+-doped ZBLAN Fiber Lasers

15 W high OSNR kHz-linewidth linearly-polarized all-fiber single-frequency MOPA at 1.6 μm.

High energy single-frequency double-pulse hybrid MOPA system

In-band pumped, Q-switched thulium-doped fiber laser system delivering 140 W and 7 mJ pulse energy.

500 Hz, 47.1 Mj, Sub-Nanosecond MOPA Laser System

All-fiberized master oscillator power amplifier structured narrow-linewidth nanosecond pulsed laser with 505 W average power

13.9-Mj All Fiber Wide Band Ytterbium-Doped Fiber Amplifier

Low repetition rate broadband high energy and peak power nanosecond pulsed Yb-doped fiber amplifier

15 W High OSNR Khz-Linewidth Linearly-Polarized All-Fiber Single-Frequency MOPA at 16 Μm

Single Mode Mopa Structured All-Fiber Yb Pulse Fiber Amplifier at Low Repetition

2Khz Single Frequency 1083nm Ytterbium Doped MOPA Fiber Laser System