Abstract:The relative content of carboxyl and hydroxyl groups on carbon nanotubes (CNTs) was tuned through a controlled reduction process. It was found that the CNTs decorated by varying ratio of carboxyl and hydroxyl groups can obviously enhance the catalytic activity of supported vanadium oxide catalysts for selective catalytic reduction (SCR) of NO with NH3. The improvement effects induced by carboxyl and hydroxyl groups depend significantly on the reacting feedstock with and without SO2 and H2O. In the absence of SO2 and H2O, hydroxyl-modified CNT supported vanadium oxide (Vx+yO2−z (x⩽4)/CNTs-OH) shows more significant improvement on SCR activity, while more obviously promoting effect was observed over carboxyl-modified CNT supported vanadium oxide (Vx+yO2−z (x⩽5)/CNTs-COOH) catalyst in the presence of SO2. The variation in oxidation states of active vanadium species (V5+, V4+ and V3+) originated from the electronic interactions between carboxyl and hydroxyl modified CNTs and vanadium precursors are indicated to be the main reason for the very different SCR performances over the two Vx+yO2−z/CNTs catalysts. Low valence V4+ and V3+ species show much higher SCR activity in the absence of SO2 and H2O, while the high valence V5+ species are very beneficial to NO reduction in the presence of SO2. The V5+ species have an excellent catalytic ability of oxidizing SO2 to SO3, leading to the in situ formation of ammonium sulfate, and are capable of catalyzing the reaction between the sulfate salts and NO. Furthermore, both of the Vx+yO2−z/CNTs catalysts are very stable for SCR of NO even in the presence of SO2 and H2O. These findings give some insight into the mechanisms behind the SCR reaction over CNT supported vanadium oxides, which would be beneficial to the design and synthesis of more efficient and much stable SCR catalysts.

Uniformly Active Phase Loaded Selective Catalytic Reduction Catalysts (v2o5/tnts) with Superior Alkaline Resistance Performance.

NOxRemoval over V2O5/WO3–TiO2Prepared by a Grinding Method: Influence of the Precursor on Vanadium Dispersion

NOx Removal Performance of TiV0.1Mn0.1Er0.01Ox Catalyst Prepared by Solution Combustion Method

Vanadium Substitution As an Effective Way to Enhance the Redox Ability of Tungstophosphoric Acid and for Application of NH3-SCR

Nh3 Selective Catalytic Reduction of No: A Large Surface Tio2 Support and Its Promotion of V2o5 Dispersion on the Prepared Catalyst

Significant Catalytic Effects Induced by the Electronic Interactions Between Carboxyl and Hydroxyl Group Modified Carbon Nanotube Supports and Vanadium Species for NO Reduction with NH3 at Low Temperature

The Properties and SCR De‐nox Application of Supported V2O5/TiO2 Catalysts with Different Polymerization State of VOx Species Controlled by the Ph Value of Their Precursors

Promotion Effect of Tungsten Oxide on SCR of NO with NH3 for the V2O5–WO3/Ti0.5Sn0.5O2 Catalyst: Experiments Combined with DFT Calculations

Promotional Effects of Carbon Nanotubes on V2O5/TiO2 for NOX Removal.

Interface sites on vanadia-based catalysts are highly active for NOx removal under realistic conditions

Investigations of Surface VOx Species and Their Contributions to Activities of VOx/Ti0.5Sn0.5O2 Catalysts Toward Selective Catalytic Reduction of NO by NH3

Ammonium Ion Enhanced V2O5-WO3/TiO2 Catalysts for Selective Catalytic Reduction with Ammonia

Catalytic Reduction of NO with NH 3 over V 2 O 5 -MnO X /TiO 2 -Carbon Nanotube Composites

Active Vanadium(IV) Species Synthesized at Low-Temperature Facilitate Excellent Performance in Low-Temperature NOx-Catalytic Removal

Tuning the Property of Mn-Ce Composite Oxides by Titanate Nanotubes to Improve the Activity, Selectivity and SO2/H2O Tolerance in Middle Temperature NH3-SCR Reaction

Crystal-Plane-Engineered TiO2-Anchored Vanadium Single Atoms and Clusters for Boosting Ultradeep Aerobic Oxidative Desulfurization of Diesel

[Effect of Vanadium and Tungsten Loadings on the Surface Characteristics and Catalytic Activities of V2O5-WO3/TiO2 Catalysts].

Promoting C-Cl Bond Activation Via a Preoccupied Anchoring Strategy on Vanadia-Based Catalysts for Multi-Pollutant Control of NOx and Chlorinated Aromatics.

Highly Efficient Mesoporous V2O5/WO3–TiO2 Catalyst for Selective Catalytic Reduction of NOx: Effect of the Valence of V on the Catalytic Performance

Selective Catalytic Removal of High Concentrations of NOx at Low Temperature

Effect of acidic promoters on the titania-nanotubes supported V2O5 catalysts for the selective oxidation of methanol to dimethoxymethane