Abstract:Broadband electro-optic (EO) frequency combs, which have flexible and high repetition frequencies, are prospective light sources for dense-wavelength-division-multiplexed coherent optical communications. In most cases, nonlinear spectral broadening and amplification procedures are needed to achieve broadband and high-power EO frequency combs. This leads to a low optical carrier-to-noise ratio (OCNR) for comb lines, limiting the transmission capacity. Here, we propose to use an air-gap Fabry-Pérot (FP) cavity to improve the OCNR for all the comb lines covering a 30 nm broadband spectrum. A 12 dB OCNR (0.1 nm bandwidth) improvement is obtained experimentally via using an FP cavity with ∼790 MHz bandwidth. We apply a 150-channel filtered EO comb with 25 GHz channel spacing and load 20 GBaud signals on each comb line to demonstrate the effect of OCNR improvement. The 137/150 channels have a bit error rate below the threshold of soft-decision forward error correction when using the 128 quadrature amplitude modulation (QAM) format. However, none of these channels can support this modulation format without cavity filtering. We also investigate dispersion tolerance and the long-term stability when using an air-gap FP cavity, highlighting its advantages. Our results show a practical solution to boost the transmission capacity when applying broadband EO combs in optical communications.

Repetition Rate Multiplication of Frequency Comb Using All-Pass Fiber Resonator

Photonic Integrated Circuit Implementation of a Sub-Ghz-selectivity Frequency Comb Filter for Optical Clock Multiplication

Phase-Stable Repetition Rate Multiplication Of Dual-Comb Spectroscopy Based On A Cascaded Mach-Zehnder Interferometer

Optically Stabilized Erbium Fiber Frequency Comb with Hybrid Mode-Locking and A Broad Tunable Range of Repetition Rate

High Repetition Rate Passively Mode-Locked Fiber Laser with A Composite Cavity Structure for Repetition Rate Control

Multi-branch Fiber Frequency Comb for Precision Frequency Measurement of Molecular Transitions

An All-Polarization-Maintaining Multi-Branch Optical Frequency Comb for Highly Sensitive Cavity Ring-Down Spectroscopy

Tunable Repetition Rate Multiplier Based on Fiber Optical Parametric Oscillator

Fiber Re-Circulating Emulator for Precise 504-Km Optical Frequency Combs Transmission.

Rapid-scanned and self-corrected repetition rates enabled in a bidirectional polarization-multiplexed fiber laser

Tunable optical frequency comb from a compact and robust Er:fiber laser

Synergetic Repetition Frequency Locking of an Optical Frequency Comb

Long-term Frequency-Stabilized Er:fiber-based Optical Frequency Comb with Nonlinear Amplifying Loop Mirror

Attosecond-Resolution Er:Fiber-Based Optical Frequency Comb

Air-gap Fabry–Pérot Cavity Filtered 30 Nm Broadband Electro-Optic Frequency Combs for High-Order Coherent Communications

Research On Key Technologies Of High Repetition Rate Optical Frequency Comb

All Polarization-Maintaining Er:fiber Frequency Comb Based on Nonlinear Amplifying Loop Mirror

A 303 MHz Fundamental Repetition Rate Femtosecond Er:fiber Ring Laser

Hybrid Mode-Locked Er-fiber Oscillator with a Wide Repetition Rate Stabilization Range

Fully phase-stabilized 1 GHz turnkey frequency comb at 1.56 $μ$m

Stable Frequency Dissemination over Multi-Access Fiber Loop Link with Optical Comb.