Abstract:Accuracy of many scientific experiments and industrial applications could benefit from the most accurate optical frequency combs, which, however, are typically located only in a few dedicated metrology laboratories. Distribution of these highly‐stable combs is suggested beyond these dedicated laboratories using hollow core fibers, which is shown to preserve the combs' stability better than today‐mainstream optical fibers. Over the last two decades, optical frequency combs (OFCs) have enabled some of the most accurate measurements in physics. Distributing light from OFCs via optical fibers could make these high‐accuracy measurement tools available more widely, from a few dedicated metrology laboratories to other laboratories and industry. However, the performance of distributed OFCs is strongly limited by impairments of standard single mode fiber (SMF), most notably its thermal sensitivity of chromatic dispersion, for which no compensation technique has been shown to date. To overcome this limitation, use of a new class of optical fiber is suggested here: a hollow core fiber (HCF), which offers more than an order of magnitude lesser such impairment. The measured OFC frequency stability of the optical mode and mode spacing reaches 1.8 × 10−19 and 1.5 × 10−17 at a few thousand seconds, respectively, after transmitting through 7.7 km of HCF. To the best of knowledge, this is the best ever performance for km‐lengths of fiber‐based OFC distribution. Besides, other HCF advantages over SMF in this application are discussed. Specifically, HCFs offer over an order of magnitude lower thermal sensitivity of propagation delay, several orders of magnitude lower optical nonlinearity, and almost ten times lower chromatic dispersion.

Fiber Re-Circulating Emulator for Precise 504-Km Optical Frequency Combs Transmission.

Precise Radio Frequency Dissemination Via Simulated 3000-Km Fiber Re-Circulating Loop

Two-Way Optical Time and Frequency Transfer over a 20-Km Fiber Link Based on Optical Frequency Combs

Simultaneously Precise Frequency Transfer and Time Synchronization Using Feed-Forward Compensation Technique Via 120 Km Fiber Link

High-Precision and Synchronous Measurement of Fiber Length and Dispersion Using Optical Frequency Comb-Based Time-Delay Dispersion Interferometry

Long-Haul High Precision Frequency Dissemination Based on Dispersion Correction

Stable Frequency Dissemination over Multi-Access Fiber Loop Link with Optical Comb.

Remote Residual Instability Evaluation of Comb-Based Precise Frequency Transmission for Optical Clock

Clock-offset Measurement over a 50 Km Nonreciprocal Fiber Link with Linear Optical Sampling

Long Distance Broadband Fiber Optical Beamforming over 120 Km

Optical Frequency Standard of Continuous Wave for Fiber Communication Based on Optical Comb

Full Dispersion Compensation for ~500 Fs Pulses over 50 Km SMF Fiber Transmission at 10 GHz Using Dispersion Compensating Fiber and a Spectral Phase Equalizer

Optical Frequency Transfer over 60 km Urban Telecom Fiber Link

Sub-100 femtosecond resolution of clock-offset measurement over a 100 km fiber link with dual-comb sampling

Stable Photonic Transmitting Link Based on Passive Phase Compensation with Active-Assisted Control Method

Microwave Frequency Transfer over 3000-Km Fiber Based on Optical Frequency Combs and Active Noise Cancellation

Feed-forward digital phase compensation for long-distance precise frequency dissemination via fiber network.

The Frequency Transfer over 1000 Km of Fiber Using the Optical Frequency Comb

Stable Optical Frequency Comb Distribution Enabled by Hollow‐Core Fibers

Experimental Demonstration of High-Precision Multi-access Time Transfer via Optical-Electrical-Optical Repeater Stations

Fiber-based multiple-access ultrastable frequency dissemination.