Abstract:In this paper, we demonstrate an optical frequency comb (OFC) based on an erbium-doped-fiber femtosecond laser, for the measurement of cavity ring-down spectroscopy (CRDS) with wavelengths of 1064, 1083, 1240, 1380, 1500, 1600, 1750 and 2100 nm. We adopt a multi-branch structure to produce high power at the specific wavelengths to meet the requirement for application in the spectral measurement. The OFC is developed by using a mode-locked fiber ring laser based on the nonlinear amplifying loop mirror mechanism. The laser is self-starting by introducing a nonreciprocal phase bias in the cavity and insensitive to the environmental perturbation. Using the chirped pulse amplification and highly nonlinear fibers, the broad spectra at the specific wavelengths are obtained. By optimizing the parameters of the pulses, the power of per mode at each target wavelength is greater than 300 nW.The frep is obtained by detecting the output of the femtosecond laser directly, while the fceo is detected by f-2f interference. The signal-to-noise ratio of the fceo is about 35 dB with a 300-kHz resolution bandwidth. By controlling the intra-cavity electro-optic modulator and piezoactuator , the frep is stabilized with high bandwidth and large range (about megahertz bandwidth and 3 kHz range). The fceo is stabilized by using feedback to the pump current of the femtosecond laser dynamically. The in-loop frequency instability degree of the fceo, evaluated by the Allan deviation, is approximately 4.95 × 10–18/τ1/2 at 1 s and integrates down to 10–20 level after 2000 s, while that of the frep is well below 5.85 × 10–13/τ. The all polarization-maintaining erbium fiber-based femtosecond optical frequency comb with multi-application branches we demonstrate in this paper is efficient and reliable for many other applications including optical frequency metrology and optical atomic clocks.

Research On Key Technologies Of High Repetition Rate Optical Frequency Comb

Research Progress on Coherent Synthesis of Optical Frequency Comb

Broadband, high-power optical frequency combs covering visible to near-infrared spectral range

Optical Frequency Comb Generation from a 1.65 Μm Single-Section Quantum Well Laser.

Long-term Frequency-Stabilized Er:fiber-based Optical Frequency Comb with Nonlinear Amplifying Loop Mirror

A low repetition rate optical frequency comb

Multi-branch Fiber Frequency Comb for Precision Frequency Measurement of Molecular Transitions

Attosecond-Resolution Er:Fiber-Based Optical Frequency Comb

Mid-infrared optical frequency combs: Progress and applications

Line-Spacing-Multiplied Optical Frequency Comb Generation Using an Electro-Optic Talbot Laser and Cross-Phase Modulation in a Fiber

Optical frequency comb technology for ultra-broadband radio-frequency photonics

Recirculating Frequency Shifting Based Wideband Optical Frequency Comb Generation by Phase Coherence Control

Highly Integrated Repetition Frequency Locking Control System for Optical Frequency Comb

An ultra-stable high-power optical frequency comb

Precise control of fiber-based femtosecond optical frequency comb

Development of an Erbium-Fiber-laser-based Optical Frequency Comb at NTSC

Robust Optical Frequency Comb Generation by Using a Three-Stage Optical Nonlinear Dynamic

Optical frequency comb generation based on spectral broadening of a phase locked dual-wavelength microcavity laser

Precise control of optical phase and coherent synthesis in femtosecond laser based optical frequency combs

Multi-branch Erbium Fiber-Based Femtosecond Optical Frequency Comb for Measurement of Cavity Ring-Down Spectroscopy

Experimental demonstration of a low repetition rate optical frequency comb