Line-Spacing-Multiplied Optical Frequency Comb Generation Using an Electro-Optic Talbot Laser and Cross-Phase Modulation in a Fiber

Juanjuan Yan,Haiyan Dong,Yu Wang

DOI: https://doi.org/10.3390/photonics11030282

IF: 2.536

2024-03-22

Photonics

Abstract:An optical frequency comb (OFC) generator based on an electro-optic Talbot laser and cross-phase modulation (XPM) in a high nonlinear fiber (HNLF) is designed and demonstrated. The Talbot laser is an electro-optic frequency shifting loop that is used to produce repetition rate-multiplied pulses, and these pulses work as a pump signal that induces the XPM process in the HNLF to modulate the phase of a probe signal. At the output of the HNLF, OFCs with a multiplied line spacing can be generated. The effects of the pump power and the HNLF length on the performance of the generated OFCs are theoretically analyzed. In the experiments, the line spacing of the generated OFCs is multiplied to be 10 GHz, 15 GHz, and 20 GHz with a factor of 2, 3, and 4, respectively. The center of the OFCs is tuned in a 4 nm range by adjusting the wavelength of the probe signal.

optics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is how to generate an optical frequency comb (OFC) with a large line spacing. The line spacing of OFCs generated by traditional methods such as mode - locked lasers (MLLs) is usually on the order of tens of MHz, which is determined by the cavity length of the laser. In order to achieve a larger line spacing, this paper proposes a new method for generating an OFC with doubled line spacing based on an electro - optic Talbot laser (EO Talbot laser) and cross - phase modulation (XPM) in a highly nonlinear fiber (HNLF).

Specifically, in the paper, a system is designed and demonstrated, which uses an electro - optic Talbot laser to generate pulses with a doubled repetition rate, and these pulses are used as pump signals to induce the XPM process in a highly nonlinear fiber, thereby modulating the phase of the probe signal, and finally generating an OFC with doubled line spacing at the output end of the HNLF. The experimental results show that this system can double the line spacing of the OFC to 10 GHz, 15 GHz, and 20 GHz respectively, and the corresponding multiplication factors are 2, 3, and 4 respectively. In addition, by adjusting the wavelength of the probe signal, the center of the OFC can be tuned within a range of 4 nm.

This research solves the problems of increased loss and output pulse distortion caused by the need for a long dispersion fiber to double the pulse repetition rate in the existing technology, and provides a more flexible and efficient method for generating an OFC with a large line spacing.