Abstract:Light emission from semiconductors depends not only on the efficiency of carrier injection and recombination but also extraction efficiency. For ultraviolet emission from high band gap materials such as ZnO, nanowires have higher extraction efficiencies than thin films, but conventional approaches for creating a p-n diode result in low efficiency. We exploited the noncentral symmetric nature of n-type ZnO nanowire/p-type GaN substrate to create a piezoelectric ! potential within the nanowire by applying stress. Because of the polarization of ions in a crystal that has noncentral symmetry, a piezoelectric potential (piezopotential) is created in the crystal under stress. The piezopotential acts as a "gate" voltage to tune the charge transport and enhance carrier injection, which is called the piezo-phototronic effect. We propose that band modification traps free carriers at the interface region in a channel created by the local piezoelectric charges. The emission intensity and injection current at a fixed applied voltage have been enhanced by a factor of 17 and 4, respectively, after applying a 0.093% compressive strain and improved conversion efficiency by a factor of 4.25. This huge enhanced performance is suggested arising from an effective increase in the local "biased voltage" as a result of the band modification caused by piezopotential and the trapping of holes at the interface region in a channel created by the local piezoelectric charges near the interface. Our study can be extended from ultraviolet range to visible range for a variety of optoelectronic devices that are important for today's safe, green, and renewable energy technology.

Femtosecond Laser Direct Writing of Microholes on Roughened ZnO for Output Power Enhancement of InGaN Light-Emitting Diodes.

GaInN Light-Emitting Diodes with Omni-Directional Reflector Using Nanoporous SnO2 Film

Enhancing Light Emission of Zno Microwire-Based Diodes by Piezo-Phototronic Effect

Largely Enhanced Efficiency In Zno Nanowire/P-Polymer Hybridized Inorganic/Organic Ultraviolet Light-Emitting Diode By Piezo-Phototronic Effect

Light Extraction Efficiency Enhancement of GaN-based Light Emitting Diodes by a ZnO Current Spreading Layer

Enhanced Light Output of InGaN-Based Light Emitting Diodes with Roughed P-Type GaN Surface by Using Ni Nanoporous Template

Light Extraction Enhancement of GaN LEDs by Hybrid ZnO Micro-Cylinders and Nanorods Array

High-output power GaN-LED based on surface plasmon enhancement

Enhancement of Light Extraction of GaN Light-Emitting Diode Using Opals Layer

The Underlying Micro-Mechanism of Performance Enhancement of Non-Polar N-Zno/p-algan Ultraviolet Light Emitting Diode with I-Zno Inserted Layer

Enhanced Light Extraction Efficiency of Light-Emitting Diodes with ZnO Nanorod Arrays

Light extraction enhancement of light-emitting diodes by nanopillar hierarchical structures

Studies Of Improving Light Extraction Efficiency Of High Power Blue Light-Emitting Diode By Photo-Enhanced Chemical Etching

Improvement of UV electroluminescence of n-ZnO/p-GaN heterojunction LED by ZnS interlayer

Enhancement in the Light Output Power of Gan-Based Light-Emitting Diodes with Nanotextured Indium Tin Oxide Layer Using Self-Assembled Cesium Chloride Nanospheres

Dual enhancement of light extraction efficiency of flip-chip light-emitting diodes with multiple beveled SiC surface and porous ZnO nanoparticle layer coating

Enhancement of Light Extraction from Microstructured GaN-Based Light Emitting Diodes by Technique of Nanoimprint

Effect of ITO Interface Modulation Layer on the Performances of LEDs with Ga-doped ZnO Electrode

Light Extraction Improvement from GaN-Based Light-Emitting Diodes with Nano-Patterned Surface Using Anodic Aluminum Oxide Template

Plasmon-enhanced Electrically Light-emitting from ZnO Nanorod Arrays/p-GaN Heterostructure Devices

Performance-enhanced vertical LED using laser irradiation treatment to control wafer-level n-GaN protrusion arrays