Abstract:The thinner blades with high aerodynamic loading in modern fans and compressors become more susceptible to fluid induced vibration, thus affecting the safe operation of the aero-engine. A coupled fluid-structure interaction method which adopts an in-house CFD code and an open-source structure analysis software CalculiX is developed for flutter analysis of turbomachinery. In this method, conservative and accurate data transfer has been realized at the non-matching mesh interfaces between the fluid and solid domain by using a novel interpolation method, and which is based on locally dimensionality reduction and cell surface integration. The comparisons with other commonly used data transfer methods at the fluid and structure interfaces such as consistent interpolation and radial basis functions interpolation have been carried out. The results showed that the proposed method has good performance and robustness in converting the fluid pressure and viscosity stress into the loads of the structure nodes at the coupling interface. Then the coupled fluidstructure interaction method was applied to predict the aeroelastic characteristics of NASA Rotor 67 and STCF4. The aerodynamic damping coefficients attained by the coupled fluid-structure interaction method agree well with the experimental data or the computational results by other researchers, indicating the effectiveness of the proposed interface data transfer method in turbomachinery flutter analysis.

CFD Analysis of Aerodynamic Characteristics for the Ducted Tail Rotor and Its Aerofoil

Numerical and Experimental Research of Flow Control on an NACA 0012 Airfoil by Local Vibration

Airfoil Parameterization Evaluation Based on a Modified PARASEC Method for a H-Darrious Rotor

Experimental and Numerical Studies on Aerodynamic Control of NACA 4418 Airfoil with a Rotating Cylinder

A Combined Method of CFD Simulation and Modified Beddoes-Leishman Model to Predict the Dynamic Stall Characterizations of S809 Airfoil

Numerical simulation of an airfoil for stall regulated HAWT rotors at large angles of attack

Numerical analysis of aerodynamic characteristics for the design of a small ducted fan aircraft

Numerical study on aerodynamic performance of a ducted tail rotor in hover and sideward flight

Simulation Analysis and Experimental Study on Airfoil Optimization of Low-Velocity Turbine

Computations of Unsteady Aerodynamic Characteristic of Rotor Airfoil at Low Mach Numbers

Study on Airfoils and Aerodynamics of High-Speed Aircraft Propeller

Analysis of Turbulent Separated Flows for the NREL Airfoil Using Anisotropic Two-Equation Models at Higher Angles of Attack

Coupled Fluid-structure Aeroelastic Analysis of Turbomachinery Using Conservative Data Transfer Algorithm

A Novel Model for CFD-Based Throughflow Analysis of Film-Cooled Turbine Blade

Aerodynamic analysis and modeling of coaxial ducted fan aircraft with the ceiling effect

Numerical Investigation of Classic Flutter Mechanism Under Circumferentially Non-Uniform Inlet Condition

A Coupled CFD/Trim Analysis of Coaxial Rotors

Numerical Study of Unsteady Viscous Flow Past Oscillating Airfoil

Development and Validation of a CFD Technique for the Aerodynamic Analysis of HAWT

NUMERICAL SIMULATION OF THE AERODYNAMIC PERFORMANCE OF A SINGLE-STAGE TURBINE AT OFF-DESIGN WORKING CONDITIONS

The Research Analysis of Aerodynamic Numerical Simulation of Grid Fin