Abstract:An efficient cooling method for the turbine inner casing is essential with the increasing of the turbine inlet temperature. The heat transfer and flow characteristics of a coupled cooling system in the turbine inner casing part, i.e., three rows of impingement jets and film holes, have been studied numerically according to the real turbine operating conditions. Seven inclined angles of the film holes along the mainstream direction (90°, ±60°, ±45°, ±35°) and the impingement jets arrangements have been researched. The positive inclination is that the angle between the fluid flow from the film holes and the mainstream is less than 90°. Otherwise, it would be negative. The numerical validation reveals that the selected computational method can provide a good prediction of the reported experimental results of the impinging-film cooling system. Then the method has been applied in the investigation of the local/average temperature, film-cooling effectiveness, and the flow patterns on the film-cooled surface. The results show that the inclined angle can achieve a significant improvement in the film cooling performance. With the positive inclination of film holes, the average temperature of the interaction surface between the mainstream and the turbine inner casing can decrease 50K compared with that of 90°. And the average temperature on the interaction surface with the negative inclined angle can even be reduced by more than 100K. Additionally, the average film-cooling effectiveness can be increased by up to 31.79%. Such results prove that decreasing the value of inclined angle can achieve a better heat transfer performance. Moreover, the negative inclination of film holes can improve the uniformity of the film-cooling effect. On the other hand, the influence of impingement jets arrangements on the film cooling behavior is negligible. Further analysis of the flow streamline illustrates that the coolant jet from the inclined film holes can attach to the interaction surface more firmly, which will achieve a better protection away from the high-temperature turbine gas. The research will provide direct guidance for the cooling design of the turbine inner casing and improve the thermal efficiency of the gas turbine system.

Numerical Simulation of Leading Edge Film-Cooling in a Turbine Cascade

Numerical Simulation of Influence of Leading Edge Film-Cooling on Aerodynamic Parameters in Turbine Cascade

Numerical Simulation of Film Cooling on the Leading Edge of Turbine Blade

Numerical Simulation of Film Cooling at the Leading Edge of a Turbine Blade with Two Rows of Staggered Holes

Numerical Method for Coolant Mixing in Turbine Cascade Flow Field

Numerical Simulation of the Influence of Bowed Blade on the Performance of Turbine Cascade with Film-Cooling

Numerical Simulation on Film Cooling with Compound Angle of Blade Leading Edge Model for Gas Turbine

Numerical Simulation for the Film Ejections of Turbine Vane

Unsteady Numerical Simulation of the Turbine Blade Film Cooling

Numerical Simulation for Heat Transfer Properties at Trailing Edge of Gas Turbine Airfoils

Numerical Simulation and Design Improvement of Leading-Edge Film Cooling in an Inlet Guide Vane

Numerical Simulation on Flow and Heat Transfer Characteristics of Film/Regenerative Compound Cooling Process

Numerical Simulation on Film Cooling Performance of Leading Edge of AGTB Blade

NUMERICAL INVESTIGATION OF IMPINGING-FILM HEAT TRANSFER AND FLOW CHARACTERISTICS OF TURBINE INNER CASING

Numerical study on film-cooling effectiveness on endwall of a turbine cascade by different film-cooling jet structures

Numerical simulation on impingement and film composite cooling of blade leading edge model for gas turbine

Numerical Analysis and Design Optimization on Full Coverage Film-Cooling for Turbine Guided Vane

Numerical Simulation of Turbine Stage with Cooling Gas Injection

Numerical simulation and experiment for turbine cascade with trailing edge coolant injection

Numerical Analysis on the Leading Edge Film Cooling of Bifurcation Holes for Gas Turbine Blade

Study on Leading-Edge Trenched Holes Arrangement under Real Turbine Flow Conditions