Abstract:The relationship between von Mises equivalent stress <math>σ¯</math> and equivalent plastic strain <math>ε¯</math> (PEEQ), termed as von Mises stress-strain, plays an important role in numerical simulations for ductile fracture of structural metallic materials with large plastic strain. The standard uniaxial tensile test on cylindrical specimens is the most straightforward method to derive the (<math>σ¯−ε¯</math>) data. However, the distribution of the stress and strain along the necking section of the tensile specimen is no longer uniform in the post-necking process, which induces difficulty in acquiring the (<math>σ¯−ε¯</math>) data. The existing correction methods to identify von Mises stress-strain in the post-necking regime need instantaneous geometry of the notched region and ignore influence of the initial geometry of the specimen, which induces these methods are inconvenient for application and inapplicable for circumferentially notched tensile specimens to determine (<math>σ¯−ε¯</math>) of each individual material zone in a hybrid coupon (e.g. weldment). In the present study, influences of initial geometry of the specimen and plastic hardening property of material on necking process are investigated firstly. It is found that the shrinking behavior of the minimum cross-section of the specimen is determined by the geometric parameter of specimen and plastic hardening exponent of materials. Based on an extensive parametric study a modified power law function to characterize the von Mises stress-strain curve from tensile tests on circumferentially notched specimens without measuring instantaneous geometry of cross-section is proposed.

The Crosswise Effects of Thin-Film Strain Gages and Its Influencing Factors

Molecular dynamics study on the dependence of thermal conductivity on size and strain in GaN nanofilms

Indentation Size Effect: A Study Via The Mechanism-Based Strain-Gradient Plasticity Theory

On energetic and dissipative gradient effects within higher-order strain gradient plasticity: Size effect, passivation effect, and Bauschinger effect

ANALYTICAL AND NUMERICAL INVESTIGATIONS FOR THIN-FILM WITH CONSTRAINT UNDER UNIAXIAL TENSION

Experimental Methodology for Obtaining the Flow Curve of Sheet Materials in a Wide Range of Strains

An investigation of the combined size and rate effects on the mechanical responses of FCC metals

The study of grain boundary density effect on multi-grain thin film under tension

Identification of an Actual Strain-Induced Effect on Fast Ion Conduction in a Thin-Film Electrolyte

The Effects of Stresses and Interfaces on Texture Transformation in Silver Thin Films

Determination of the Microscale Stress–strain Curve and Strain Gradient Effect from the Micro-Bend of Ultra-Thin Beams

Strain effect analysis on the electrical conductivity of Si/Si 1-xGex nanocomposite thin films

Bauschinger and Size Effects in Thin-Film Plasticity Due to Defect-Energy of Geometrical Necessary Dislocations

Multiscale Micromorphic Model For The Plastic Response Of Cu Thin Film

The effect of thin film/substrate radii on the Stoney formula for thin film/substrate subjected to nonuniform axisymmetric misfit strain and temperature

Simplified method to identify full von Mises stress-strain curve of structural metals

Effect of temperature and strain rate on deformation behavior in metallic glassy films

Effects of Strain Hardening and Initial Yield Strength on Machining-Induced Residual Stresses

Loading conditions constrained wrinkling behaviors of thin-walled sheet/tube parts during metal forming

Multiscale Analysis And Numerical Modeling Of The Portevin-Le Chatelier Effect