A Resistorless CMOS Voltage Reference Based on Mutual Compensation of $V_{T}$ and $v_{\rm TH}$
Ze-kun Zhou,Pei-sheng Zhu,Yue Shi,Xi Qu,Hui-ying Wang,Xiao-min Zhang,Shi Qiu,Nie Li,Chao Gou,Zhuo Wang,Bo Zhang
DOI: https://doi.org/10.1109/tcsii.2013.2268639
2013-01-01
IEEE Transactions on Circuits & Systems II Express Briefs
Abstract:A novel temperature-stable nonbandgap voltage reference without resistors is presented in this brief, which is compatible with standard digital CMOS technology. Two linear-temperature terms, i.e., thermal voltage V-T and threshold voltage V-TH, are utilized to realize a low-temperature-dependent voltage reference with a significant reduction of nonlinear temperature terms. A self-biased threshold-voltage extractor circuit without any resistor is used to obtain the V-TH and bias currents of the whole circuit. Based on ratioed transistors biased in a strong inversion region and the inverse-function technique, a temperature-insensitive gain can be applied to the proportional-to-absolute temperature term in the reference, and a weighted sum of V-T and V-TH is achieved. Experimental results of the proposed voltage reference implemented with a 0.35-mu m CMOS process demonstrate that the output of voltage reference is 905.5 mV, a temperature coefficient of 14.8 ppm/degrees C with a temperature range of 0 degrees C-100 degrees C is obtained at a 3.3-V power supply, and a power-supply noise attenuation of 61 dB is achieved without any filtering capacitor while dissipating a maximum supply current of 65 mu A. The active area is 100 mu m x 100 mu m.