Abstract:The practical applications of perovskite solar cells (PSCs) are limited by further improvement of their stability and performance. Additive engineering and interface engineering are promising medicine to cure this stubborn disease. Herein, an alkali metal fluoride as an additive is introduced into the tin oxide (SnO2) electron transport layer (ETL). The formation of coordination bonds of F– ions with the oxygen vacancy of Sn4+ ions decreases the trap-state density and improves the electron mobility; the hydrogen bond interaction between the F ion and amine group (FA+) of perovskite inhibits the diffusion of organic cations and promotes perovskite (PVK) stability. Meanwhile, the alkali metal ions (K+, Rb+, and Cs+) permeated into PVK fill the organic cation vacancies and ameliorate the crystal quality of PVK films. Consequently, a SnO2-based planar PSC exhibits a power conversion efficiency (PCE) of 20.24%, while the PSC modified by CsF achieves a PCE of 22.51%, accompanied by effective enhancement of stability and negligible hysteresis. The research results provide a typical example for low-cost and multifunctional additives in high-performance PSCs.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c16519.Top-view SEM images (Figure S1); K 2p, Rb 3d, and Cs 3d core-range XPS spectra (Figure S2); Figure S3: high-resolution XPS spectra of F 1s. Figure S4: fitted high-resolution XPS spectra of Sn 3d. Figure S5: EDS mapping image. Figure S6: XPS spectra of Cs 3d. Figure S7: dark I–V curves of electron-only devices. Figure S8: UPS spectra. Figure S9: distribution histogram of PCEs for devices. Figure S10: J–V curves of PSCs. Table S1: main parameters of the Sn 3d peak. Table S2: main parameters of the O 1s peak. Table S3: TRPL parameters of perovskite. Table S4: resistance data of different ETLs. Table S5: conductivity for different ETLs. Table S6: average PCEs of PSCs. Table S7: statistics of photovoltaic data of PSCs (PDF)This article has not yet been cited by other publications.

Additive engineered SnO2-based electron transport layer for the robust and high-efficiency large-scale perovskite solar cell

Enhancing Electron Extraction and Transport in Inorganic Perovskite Solar Cells Via Additional Built-in Potential of SnO2-BiFeO3 Nano-Heterostructure

Multifunctional Compound‐Regulated SnO2 for High‐Efficiency and Stable Perovskite Solar Cells under Ambient Air

Simultaneous Passivation of the SnO2/Perovskite Interface and Perovskite Absorber Layer in Perovskite Solar Cells Using KF Surface Treatment

Improved SnO2 Electron Transport Layers Solution‐Deposited at Near Room Temperature for Rigid or Flexible Perovskite Solar Cells with High Efficiencies

Enhanced Charge Transport and Interface Passivation in Efficient Perovskite Solar Cells Using Sulfur‐Doped Graphite Carbon Nitride‐Modified SnO 2 ‐Based Electron Transport Layers

Modification of SnO2 electron transport Layer: Brilliant strategies to make perovskite solar cells stronger

Enhanced Charge Transport and Interface Passivation in Efficient Perovskite Solar Cells Using Sulfur‐Doped Graphite Carbon Nitride‐Modified SnO2‐Based Electron Transport Layers

High-effective SnO2-based perovskite solar cells by multifunctional molecular additive engineering

All‐SnO2‐Based Conformal Electron Transport Layer for Efficient Perovskite Solar Cells

A low-temperature TiO2/SnO2 electron transport layer for high-performance planar perovskite solar cells

Optimized SnO2 preparation and coherent interlayers for enhanced charge dynamics and efficient perovskite photovoltaics

Preparation of TiO2/SnO2 Electron Transport Layer for Performance Enhancement of All-Inorganic Perovskite Solar Cells Using Electron Beam Evaporation at Low Temperature

Tin Oxide Bilayer as Effective Electron Transport Layers for Efficient and Stable Perovskite Solar Modules

SnO2-Ti3C2 Blends As Electron Transport Layer for Efficient and Easily Fabricated Planar Perovskite Solar Cells

Simultaneous Passivation of the SnO 2 /Perovskite Interface and Perovskite Absorber Layer in Perovskite Solar Cells Using KF Surface Treatment

Managing Interfacial Defects and Charge-Carriers Dynamics by a Cesium-Doped SnO2 for Air Stable Perovskite Solar Cells

Alkali Metal Fluoride-Modified Tin Oxide for n–i–p Planar Perovskite Solar Cells

Robust Electron Transport Layer of SnO2 for Efficient Perovskite Solar Cells: Recent Advances and Perspectives

Rational design of SnO 2 -based electron transport layer in mesoscopic perovskite solar cells: more kinetically favorable than traditional double-layer architecture

Design of SnO2 Electron Transport Layer in Perovskite Solar Cells to Achieve 2000 h Stability Under 1 Sun Illumination and 85 °C