Abstract:The pipelined-SAR ADC has become popular in wide-bandwidth and high-resolution applications due to its power-efficient architecture [1]. In the pursuit of higher ADC speeds while maintaining precision and power efficiency, not only does the conversion time of the SAR sub-ADC need to be shortened, but also the speed and gain of residue amplifiers (RA) need to be enhanced. Conventional solutions to these two problems, including reducing the bit-cycling time of the SAR and increasing the RA bandwidth, often require extensive power costs, leading to a degraded power efficiency. To address the speed and gain challenges, three techniques are proposed in this work. First, a continuous-time SAR-assisted detect-and-skip (CTDAS) to parallelize the MSB conversion with ADC sampling, thus cutting down the $1^{\text{st}}$-stage sampling and conversion time by 35% when compared with a conventional detect-and-skip (DAS) technique. Second, an open-then-close correlated level shifting (OCCLS) technique applied in the residue amplifier, which significantly speeds up the first phase by open-loop amplification reusing the first two high-bandwidth stages of the RA. With the aid of a detect-and-cut loop, an optimal voltage gain in the first phase is obtained across PVT variations, thus realizing an >80dB equivalent RA open-loop gain $\left(\mathrm{A}_{\mathrm{EO}}\right)$ across PVT variations. Third, a hybrid static-floating ringamp architecture is implemented to improve the noise performance of the RA and to fit in well with the OCCLS scheme. Thanks to the techniques above, the 22nm prototype achieves 70.7dB SNDR under 200MS/s while consuming 2.0mW from a 0.9V supply. It measures a best energy efficiency of 177.7dB Schreier FoM with fs >150MS/s.

A 14.9μw Analog Front-End with Capacitively-Coupled Instrumentation Amplifier and 14-Bit SAR ADC for Epilepsy Diagnosis System

A Front-End Circuit With 16-Channel 12-Bit 100-Ksps Rc-Hybrid Sar Adc For Industrial Monitoring Application

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

A 16-Channel 12-Bit Rail-to-rail Successive Approxmation Register ADC for AFEs

A 15-Bit, 5 MSPS SAR ADC with On-Chip Digital Calibration

Design of an 8-Channel 12bits 1MSPS SAR ADC

A 0.49–4.34 μW LC-SAR Hybrid ADC with a 10.85-Bit ENOB and 20 KS/s Bandwidth

A 12b 200KS/s SAR ADC with novel capacitor switching procedure and digital background calibration

Design of a 0.005mm 2 8.5enob 14.9 Fj/conv-Step SAR ADC for Biomedical Application

A 12b 238ks/s SAR ADC with Novel Built-in Digital Calibration Method for EEG Acquisition Applications

An 18-Bit SAR ADC with Mixed DAC and Capacitive Recombination Calibration

An Analog Front End with a 12-Bit 3.2-Ms/s SAR ADC for a Power Line Communication System

A 65.5-Db SNDR 8.1–11.1-Nw ECG SAR ADC with Adaptive-Latching OSC-Based Comparator and DAC Calibration

An 8-Bit 100ks/s Low Power Successive Approximation Register ADC for Biomedical Applications

A 1.5MSPS, 120 dB SFDR, ±10 V input range SAR ADC with sampling nonlinearity compensation and inherent 2-b coarse ADC for MSBs decision

A 0.9V 12-Bit 200-Ks/s 1.07µw SAR ADC with Ladder-Based Reconfigurable Time-Domain Comparator

An AFE for Catheter-Based IEGM Sensing with Inverter-based SAR ADC

9.1 A 2mW 70.7dB SNDR 200MS/s Pipelined-SAR ADC with Continuous-Time SAR-Assisted Detect-and-Skip and Open-then-Close Correlated Level Shifting.

A 14-Bit Hybrid Analog-to-Digital Converter for Infrared Focal Plane Array Digital Readout Integrated Circuit

An 11-Bit 22-Ms/s 0.6 Mw Sar Adc with Parasitic Capacitance Compensation

A 1.8 Μw 32 Nv/√hz Current-Reuse Capacitively-Coupled Instrumentation Amplifier for EEG Detection