Abstract:Industrial robots (IRs) are promising options for machining large complex structural parts due to the higher flexibility, larger operating space, and lower cost compared with multi-axis machine tools. However, the relatively low posture-dependent stiffness and large stiffness deformation of IRs significantly deteriorate the contour accuracy of milling in which the cutting force is large generally. It is very complex to achieve a precise stiffness model and predict stiffness deformation of IRs because of the joint clearance, drift of zero-position, and other nonlinear factors. The conventional stiffness model of IRs only takes each joint as a constant linear torsion spring into consideration and ignores other difficult-to-model factors, which leads to low-accuracy identified results and thereafter induces deformation prediction errors. The data-driven approach can be used to obtain an accurate stiffness and deformation model, but a large amount of experimental data is required and it will cost enormous time and effort. In order to circumvent the experimental data deficiency and difficult-to-model issue, a simulation-driven transfer learning method named Adaptive Domain Adversarial Neural Network with Dual-Regressions (ADANN-2R) is designed for robot deformation prediction. Amounts of coarse deformation data, which are generated by the conventional stiffness model, are regarded as source data. And few real deformation data, which are obtained by deformation experiments, are regarded as target data. The Dual-Regressions are designed after the feature extractor, and the weighting parameters are adjusted adaptively to tackle the different magnitude of the regression loss and domain discrimination loss. The ADANN-2R aligns the simulated source data and real target data to perform adversarial training, and an accurate target deformation predictor is achieved. Experimental results indicate that the proposed ADANN-2R can obtain high-accuracy prediction with few real data compared with the conventional stiffness model. Compared with the path without deformation compensation and the pre-compensated path using the conventional stiffness model, the maximum position error of the pre-compensated path using the proposed ADANN-2R is reduced by 78.12% and 32.45%, respectively.

Deformation Error Prediction And Compensation For Robot Multi-Axis Milling

Volumetric error modeling and decoupled error compensation analysis of five-axis CNC machine tools

Deformation Prediction and Compensation of a Dual-Machine Riveting System for Aircraft Assembly

Prediction and Compensation of Force-Induced Deformation for a Dual-Machine-based Riveting System Using FEM and Neural Network

A Modeling and Calibration Method of Heavy-Duty Automated Fiber Placement Robot Considering Compliance and Joint-Dependent Errors

Support Vector Machines-Based Method for Machining Error Prediction Modeling

An Efficient Error Compensation Method for Coordinated CNC Five-Axis Machine Tools

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Positioning Error Compensation on Two-Dimensional Manifold for Robotic Machining

An Error Prediction Model of NC Machining Process Considering Multiple Error Sources

Research on machining error prediction and compensation technology for a stone-carving robotic manipulator

Deformation prediction and error compensation in multilayer milling processes for thin-walled parts

A real time machining error compensation method based on dynamic features for cutting force induced elastic deformation in flank milling

Force-induced deformation prediction and flexible error compensation strategy in flank milling of thin-walled parts

Deformation Forecast in Numerical Control Milling Based on Artificial Neural Networks

Non-Geometric Error Compensation for Long-Stroke Cartesian Robot With Semi-Analytical Beam Deformation and Gaussian Process Regression Model

Elasto-geometrical Error Modeling and Compensation of a Five-Axis Parallel Machining Robot

An Integrated Model Based Prediction of Machining Accuracy for Milling Machine

High-accuracy prediction and compensation of industrial robot stiffness deformation

Neural-network-based trajectory error compensation for industrial robots with milling force disturbance

Error Prediction in Industrial Robot Machining: Optimization Based on Stiffness and Accuracy Limit