Abstract:We synthesize ferromagnetic Co nanowire, and Co/Pd multisegment nanowires encapsulated inside multi-walled carbon nanotubes CNTs (MWCNTs) by plasma-enhanced chemical vapor deposition (PECVD). High-resolution transmission electron microscopy (HR-TEM), selected area electron diffraction (SAED) patterns and energy dispersive X-ray spectroscopy (EDS) were used to characterize the microstructures and elemental analyses of the nanowires. Quantitative magnetization measurements of Co nanowires encapsulated inside MWCNTs were experimentally established by TEM off-axis electron holography at room temperature. The MWCNTs grew up to 100-110 nm in diameter and 1.5-1.7 mu m in length. The typical bright-field TEM images revealed both Co nanowire and Co/Pd multisegment nanowires encapsulated inside vertically aligned MWCNTs on the same substrate. The composition of metal encapsulated inside MWCNTs were characterized by EDS. Experimental results revealed that the Co nanowire encapsulated inside MWCNT was always presented as the face-centered-cubic (fcc) Co structure. The component of magnetic induction was then measured to be 1.2 +/- 0.1 T based on TEM off-axis electron holography results, which is lower than the expected saturation magnetization of fcc Co bulk of 1.7 T. The partial oxidation of the ferromagnetic metal during the process and the magnetization direction may play an important role in the determination of the quality of the remanent states. The ferromagnetic metal nanowires encapsulated inside CNTs demonstrate very high potential in providing the required magnetic properties, low dimensionality, and small volume for future nanoscale devices.

Electromigration-driven linear actuator operations of Co nanorods inside and outside multi-walled carbon nanotubes with stroke of tens of nanometers

Kinematics of electromigration-driven sliding of Co nanorod fillers inside multi-walled carbon nanotubes

Twin deformation of Co nanorod filler during electromigration sliding inside multi-walled carbon nanotubes with the boundary fixed at the inner-diameter step

Growth and Magnetic Properties of Ferromagnetic Co Nanorods Filled Inside Carbon Nanotubes Towards Nanoscale Spintronics

Vacancy migrations in carbon nanotubes.

Growth and Nanoscale Magnetic Properties of Ferromagnetic Nanowire Encapsulated Inside Carbon Nanotubes

Deformation of Copper Nanowire under Coupled Tension–Torsion Loading

Microstructure and Local Magnetic Induction of Segmented and Alloyed Pd/Co Nanocomposites Encapsulated Inside Vertically Aligned Multiwalled Carbon Nanotubes

Electromagnetic Properties of Metal Coated-Micro/nano Coils Fabricated by Self-deformation

Electromagnetic Performance Of Spirally Deformed Coated Nanowires

Nanocrystallization Enabled Tensile Ductility of Co-Based Amorphous Microwires

Encapsulated Nanowires Formed by Nanotube-Assisted Oriented Attachment

A Novel Electromechanical Actuation Mechanism of a Carbon Nanotube Fiber

Surface Atom Motion to Move Iron Nanocrystals through Constrictions in Carbon Nanotubes under the Action of an Electric Current

Amorphization and Directional Crystallization of Metals Confined in Carbon Nanotubes Investigated by in Situ Transmission Electron Microscopy

Engineering Multiwalled Carbon Nanotubes Inside a Transmission Electron Microscope Using Nanorobotic Manipulation

Rotational Actuators Based on Carbon Nanotubes

Metal-filled Carbon Nanotubes for Nanomechatronics

Controlled Driven Oscillations of Double-Walled Carbon Nanotubes

Nanorobotic manipulation of carbon nanotubes inside a transimission electron microscope

Thermal gradient induced actuation in double-walled carbon nanotubes.