Abstract:For the battery- or USB-powered portable smart devices, which supply their computing cores with a wide-range sub-volt rail, the energy-efficient high and wide voltage-conversion-ratio (VCR) converters are crucially important. In addition, low form factor and decent transient responses are also favorable for such applications. Prior state-of-the-art designs either use single-stage hybrid designs using multi-level or Dickson converters [1 – 3], or adopt two-stage cascaded architectures with a highly efficient unregulated front (or rear) stage [4], as shown in Fig. 18.6.1 (left). The multi-level designs, which conduct the full inductor current through all the on-state switches, are suited to low-to-medium power levels with limited current density. The Dickson converters take advantage of a high conversion ratio, however, at the cost of reduced output voltage range. The two-stage designs which show decent output range and efficiency, however, can suffer from heavy load efficiency degradation considering that the efficiency of both stages degrade with increasing load and the overall efficiency which is the product of the efficiencies of the two stages is severely degraded. Inspired by the inductive-sigma converter [5] which shunts a highly efficient unregulated LLC with a regulated Buck, this work proposes a reconfigurable capacitive-sigma converter. By input-series and output-shunting a highly efficient unregulated switched-capacitor (SC) converter with a reconfigurable Dickson hybrid Buck stage, the power stage input current is reused and output currents are combined. Therefore, the overall efficiency is greatly improved in a wide continuous VCR range and with an enhanced loading capacity. Besides, as will be demonstrated, the proposed design shows inherently decent load transient and regulation performances.

Energy-efficient Sub-Threshold Level Shifter

A Single-Supply Sub-Threshold Level Shifter with an Internal Supply Feedback Loop for Multi-Voltage Applications

Subthreshold Level Shifter with Self-Controlled Current Limiter by Detecting Output Error.

Sub-Threshold Level Converter with Internal Supply Feedback for Multi-Voltage Applications

Fully Integrated High-Voltage Level Shifts and Drivers for Buck Converters.

An Energy-Efficient and Wide-Range Voltage Level Shifter with Dual Current Mirror.

A new level shifter with low power in multi-voltage system

An Enhanced Power-Delay and Area Efficient Dual Output Subthreshold Level Shifter

A Sub-100mV Ultra-Low Voltage Level-Shifter Using Current Limiting Cross-Coupled Technique for Wide-Range Conversion to I/O Voltage

An Ultra-Low-Voltage Energy-Efficient Dynamic Fully-Regenerative Latch-Based Level-Shifter Circuit with Tunnel-FET & FinFET Devices

A Novel High-Speed and Low Power Level Shifter

Design Techniques of Sub-ns Level Shifters With Ultrahigh dV/dt Immunity for Various Wide-Bandgap Applications

A Sub-Nanosecond Level Shifter with Ultra-High Dv/dt Immunity Suitable for Wide-Bandgap Applications.

A novel high-speed and low-power negative voltage level shifter for low voltage applications

An Ultra Low Voltage Energy Efficient Level Shifter With Current Limiter and Improved Split-Controlled Inverter

Lower-Order Compensation Chain Threshold-Reduction Technique for Multi-Stage Voltage Multipliers

A High-Speed Low-Power Dynamic Level Shifter with High Dv/dt Immunity

A New 22 nm ULPLS Architecture to Detect 70 mV Minimum Input, Suitable for IOT Applications

A low power demodulator using subthreshold design

A Novel Level Shifter for Practical IoT Applications

A 5V Input 98.4% Peak Efficiency Reconfigurable Capacitive-Sigma Converter with Greater Than 90% Peak Efficiency for the Entire 0.4~1.2V Output Range.